375 SOCOM

.375 SOCOM
Type Rifle
Place of origin United States
Production history
Designer Tromix
Specifications
Parent case .458 Socom Neck Down to .375
Shoulder diameter 13.49 mm (0.531 in)
Base diameter 13.74 mm (0.541 in)
Rim diameter 12.01 mm (0.473 in)
Rim thickness 1.04 mm (0.041 in)
Case length 40.00 mm (1.575 in)
Overall length 57.40 mm (2.260 in)
Rifling twist 1 in 12" (most common) or 10"
Primer type Large Pistol Magnum
Maximum pressure 35,000psi
Ballistic performance
Bullet mass/type Velocity Energy
200 Vollmer FB 760 m/s (2,500 ft/s) 3,478 J (2,565 ft·lbf)
220 Vollmer FB 740 m/s (2,400 ft/s) 3,261 J (2,405 ft·lbf)
200 Strike Force Sierra FP 680 m/s (2,200 ft/s) 3,384 J (2,496 ft·lbf)

The .375 SOCOM round is a custom developed round created by Tony Rumore of Tromix Lead Delivery Systems. Cases are formed from .458 SOCOM[1] run through a custom .375 SOCOM sizing die.[2]

History

The .375 SOCOM is a fairly new cartridge, designed by Tromix in 2013. Taking a .458 SOCOM cartridge case and sizing the neck down to .375 caliber, resulted in a hard hitting AR-15 compatible cartridge, that has a considerable velocity and range advantage over the .458 SOCOM as well as other big bore AR-15 cartridges. Unknown to most, the .375 SOCOM has a sizeable case capacity, nearly 60 grains, that is on par with the .308 Winchester. Typical .375 SOCOM loads will launch a 200 grain bullet 2400+ feet per second from an 18" barrel. In a short barrel suppressed subsonic application, the .375 SOCOM can be made to easily cycle the AR-15 action, using fairly fast burning propellants such as Trail Boss. This can be problematic with the .458 SOCOM when barrels are shortened below 12".

Typical powders for the .375 SOCOM include AR-Comp, AA2520, VV N530, VV N135, VV N140, IMR4895, Varget, Reloader 15, and H4895. Powders intended for the .458 SOCOM should not be used in the .375 SOCOM due to their burn rate being too fast for the .375.

Availability

Factory .375 SOCOM ammunition is currently available from SBR Ammunition and Strike Force Ammunition. .375 SOCOM head stamped brass is available from SBR Ammunition and reloading dies are available from Tromix, CH4D, and Hornady. Reloaders can form their own .375 SOCOM brass using the parent .458 SOCOM case, but they must first run the cases through a .375 SOCOM full length size die. Component bullets are available from Sierra Bullets (ref. 3), Vollmer Bullets (ref. 4), Hawk Bullets (ref. 5) The .375 SOCOM feeds from most all GI type 5.56 M16 magazines, however Magpul P-Mags are not recommended. Thirty round 5.56 magazines hold 10 rounds of .375 SOCOM ammunition and 40 round 5.56 magazines hold 14.

See also

References

  1. ↑ "CROSS MACHINE TOOL CO., INC. - AR-15/M16 458 SOCOM BILLET UPPER RECEIVER". Brownells.
  2. ↑ "Forum thread displaying the round and experience". 458 Socom Forums.
This article is issued from Wikipedia - version of the 5/22/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.