Mitsubishi 4B1 engine

4B1
Overview
Manufacturer Mitsubishi Motors
Also called World Engine
Production 2005–present
Combustion chamber
Cylinder block alloy Aluminium die cast
Cylinder head alloy Aluminium die cast
Valvetrain Direct acting DOHC, 16 valves, continuously variable MIVEC intake and exhaust valve timing
Chronology
Predecessor Mitsubishi 4G6 engine
Successor Mitsubishi 4J1 engine

The Mitsubishi 4B1 engine is a range of all-alloy straight-4 engines built at Mitsubishi's Japanese "World Engine" powertrain plant in Shiga on the basis of the Global Engine Manufacturing Alliance (GEMA).[1][2][3] Although the basic designs of the various engines are the same, their exact specifications are individually tailored for each partner (Chrysler, Mitsubishi, and Hyundai). The cylinder block and other basic structural parts of the engine were jointly developed by the GEMA companies, but the intake and exhaust manifolds, the cylinder head’s intake and exhaust ports, and other elements related to engine tuning were independently developed by Mitsubishi.[1]

All engines developed within this family have aluminium cylinder block and head, four valves per cylinder, double overhead camshaft layouts, and MIVEC continuous variable valve timing. All variations of 4B1 engine share the same short block. The difference in displacement is achieved by variance in bore and stroke.[4]

The 4B1 engine family is the first to have the continuously variable valve timing MIVEC system applied not only to its intake valves but also to its exhaust valves. The intake and exhaust cam timing is continuously independently controlled and provide four optimized engine operating modes.[1][5]

4B10

Specifications

Engine type Inline 4-cylinder DOHC 16v, MIVEC
Displacement 1.8 L (1,798 cc)
Bore 86 mm
Stroke 77.4 mm
Compression ratio 10.5:1 
Fuel system ECI multiple
Peak power 103-105 kW (140-143 PS) at 6000 rpm
Peak torque 172 N·m (17.5 kg·m) at 4250 rpm

Applications

4B11

Specifications

Engine type Inline 4-cylinder DOHC 16v, MIVEC
Displacement 2.0 L (1,998 cc)
Bore 86 mm
Stroke 86 mm
Compression ratio 10:1 
Fuel system ECI multiple
Peak power 110-114 kW (148-153 hp) at 6,000 rpm
Peak torque 199 N·m (146 lb·ft) at 4,250 rpm

Applications

Characteristics

The engines's bore and stroke both measure 86.0 mm, which engineers refer to as square. According to Mitsubishi, the new cylinder dimensions contribute to a free-revving character (max power at 6,500 rpm), linear power delivery and wide torque curve. Mitsubishi used a timing chain instead of a belt for better reliability and iridium spark plugs to lower emissions and to help extend major service intervals for lower cost of ownership. To reduce weight, Mitsubishi used a plastic cam cover and intake manifold and double-layer stainless steel exhaust manifold. The exhaust manifold has a rear location on the transverse engine, compared to the front location for the previous engine, yielding important benefits such as better emissions performance. To lower vibration, Mitsubishi used a 4-point inertial axis system with cylindrical hydraulic engine mounts on the left and right sides. A lightweight, high-rigidity squeeze-cast aluminium bracket on the right side mount (engine side) lowers engine noise under acceleration. A lightweight, high-rigidity steel plate bracket on the left side mount (transmission side) lowers gear noise. A custom-tuned insulator was developed for the front and rear mounts to help control both idle vibration and acceleration shock.[5]

4B11T

Specifications

Engine type Inline 4-cylinder DOHC 16v, Turbo MIVEC
Displacement 2.0 L (1,998 cc)
Bore 86 mm
Stroke 86 mm
Compression ratio 9:1 
Fuel system ECI multiple
Peak power 206 kW (280 PS) at 6,500 rpm (Japanese market)
217 kW (291 PS) at 6,500 rpm (US market)
177 kW (240 PS) (Lancer Ralliart)
217 kW (295 PS) at 6,500 rpm (European market)
301.5 kW (410 PS) (UK only FQ400)
Peak torque 422 N·m (311 lb·ft) at 3,500 rpm (Japanese market)
407 N·m (300 lb·ft) at 4,400 rpm (US market)
343 N·m from 2,500 to 4,725 rpm (353 N·m at 3,000 rpm) (Lancer Ralliart)
366 N·m at 3,500 rpm (European market)
542 N·m at 3,500 rpm (UK only FQ400)

Applications

Characteristics

Peak power and torque figures of 206 kW and 422 N·m are for Japanese market Lancer Evolution models[8] and figures of 217 kW and 407 N·m are for US market models.[9]

The 4B11T is the first engine in the Lancer Evolution series that uses a die-cast aluminium cylinder block versus the cast-iron block used in the previous turbocharged 4G63 engine that powered all previous models. The engine weight has been reduced by 12 kg (26 lb) compared to the 4G63, even with the addition of a timing chain instead of a belt and MIVEC continuous variable valve timing on both the intake and exhaust camshafts (the 4G63 had MIVEC valve timing & lift switching type on the intake only). A revised turbocharger offers up to 20-percent quicker response at lower engine speeds compared to previous 4G63. The 4B11T offers a broader torque curve, producing more torque than the 4G63 at all engine speeds, helped by the engine's square bore and stroke design (both measure 86.0 mm). Redline tachometer hashes start at 7,000 rpm, with a fuel cutout (true redline) at 7,600 rpm to protect the engine.[9]

A semi-closed deck structure, an integrated ladder frame and four-bolt main bearing caps contribute to engine strength, durability and lower NVH levels. Unlike the 4G63, the 4B11T does not use a balancer shaft. The semi-floating pistons of the 4G63 have been replaced with fully floating pistons for the 4B11T. Aluminium is also used for the timing chain case and cylinder head cover. The engine features an electronically controlled throttle, an isometric short port aluminium intake manifold and the stainless steel exhaust manifold is positioned at the rear of the engine. The use of a direct-acting valvetrain eliminates the need of the roller rocker arm configuration previously used in the 4G63. The 4B11T features built-up hollow camshafts and its valve stem seals are integrated with the spring seats. The internal components of the 4B11T engine have been reinforced to withstand high levels of boost.[9]

4B12

Specifications

Engine type Inline 4-cylinder DOHC 16v, MIVEC
Displacement 2.4 L (2,359 cc)
Bore 88 mm
Stroke 97 mm
Compression ratio 10.5:1 
Fuel system ECI multiple
Peak power 125 kW (168 hp) at 6,000 RPM
Peak torque Between 226 and 232 N·m (167 and 171 lb·ft) at 4,100 RPM depending on region.

Applications

Characteristics

The cylinder head intake and exhaust ports and intake and exhaust manifolds are shape optimized for better volumetric efficiency. Mitsubishi lowered the friction of the engine by including elastic grinding of the valve stems, adopting a high-efficiency shroud equipped plastic impeller in the water pump and using 0W-20 low-viscosity oil. Mitsubishi increased the combustion efficiency by optimizing the design of the cylinder head intake and exhaust ports, by incorporating the MIVEC system on both intake and exhaust valves and by using injectors that give an ultra micro droplet fuel spray. To lower the engine's weight, Mitsubishi used die-cast aluminium for the cylinder block, plastic for the cylinder head cover and intake manifold, and stainless steel for the exhaust manifold. The engine features a compact balancer shaft module with an integrated oil pump. A silent chain is used to drive the camshafts. The compact balancer module, the silent chain, the stable combustion yielded by the intake and exhaust MIVEC system, and high rigidity designs for the cylinder head and cylinder block realize low vibration and noise.[1]

See also

Wikimedia Commons has media related to Mitsubishi 4B1 engines.

References

  1. 1 2 3 4 "Newly Developed Four-Cylinder MIVEC Engine", Masato TOJO, Akihito KUBO, .pdf file, Mitsubishi Motors technical review
  2. ↑ "Mitsubishi Motors Makes Shiga Plant Japanese Production Facility of World Engine", Mitsubishi Motors website
  3. ↑ "DaimlerChrysler, Hyundai, and Mitsubishi Motors to Form Global Engine Alliance", Mitsubishi Motors website
  4. ↑ JDM Spec Engines - Mitsubishi 4B1-Series Engines
  5. 1 2 "All-New 2008 Mitsubishi Lancer Delivers Driven-To-Thrill Performance from New 152-HP Engine and Optional CVT", Mitsubishi Motors North America press release
  6. ↑ https://www.mitsubishicars.com/owners/support/vin-information
  7. ↑ http://www.mitsubishicars.com/lancer/specifications#
  8. ↑ "LANCER Evolution X GSR", Mitsubishi Motors official website, August 26, 2007
  9. 1 2 3 "All-New 2008 Lancer Evolution Debuts All-New Aluminium Turbocharged/Intercooled Engine", Mitsubishi Motors North America website, November 14, 2007
This article is issued from Wikipedia - version of the 9/2/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.