AeroPress

AeroPress

Early clear-bodied AeroPress and included accessories (filter papers not shown)
Other names AreoPress
Classification Coffeemaker
Used with Coffee
Inventor Alan Adler
Manufacturer Aerobie
Related

The AeroPress is a device for brewing coffee. It was invented in 2005 by Aerobie president Alan Adler.[1] Coffee is steeped for 10–50 seconds (depending on grind and preferred strength) and then forced through a filter by pressing the plunger through the tube. The filters used are either the AeroPress paper filters or disc shaped thin metal filters.[2][3] The maker describes the result as an espresso strength concentration of coffee, but its most frequent use is more in the filter brew strength.[4]

The device consists of two nesting cylinders. One cylinder has a flexible airtight seal and fits inside the larger cylinder, similar to a syringe. The cylinders are moulded of polypropylene, tinted a grey colour.[5] The first Aeropress were moulded of clear polycarbonate, then later of copolyester, clear and later tinted. The materials change away from polycarbonate was driven by the market fashion for BPA-free materials, even though no leaching of this material had occurred.[5] Later changes were for aesthetic and strength reasons.

Methods of brewing

Traditional

Brewing a single cup of coffee with the Aeropress
Fresh coffee produced from the Aeropress

According to the instructions, fine-ground coffee is placed in the bottom of the larger cylinder on top of a paper microfilter. Hot water at approximately 79 or 85 °C (175 or 185 °F)[6] is then poured over the coffee; this mixture is stirred for approximately 10 seconds before being forced through the microfilter by pushing the plunger downwards.[7] In the different coffee competitions worldwide (World Barista Championship, Brewers Cup, etc.), the coffee is more often ground slightly finer than 'filter grind', and the dose is between 14 and 20 g (0.49 and 0.71 oz), with about 200 to 230 ml (7.0 to 8.1 imp fl oz; 6.8 to 7.8 US fl oz) of water at 80 to 92 °C (176 to 198 °F) and a steeping time of 30 to 60 seconds.

Inverted

Baristas and coffee drinkers have also developed methods of brewing using an inverted (upside-down) AeroPress.[8][9]

In inverted brewing, the plunger is placed into the column from the beginning, close to the “top” of the column, and the entire AeroPress stands upside-down, resting on the top of the plunger. One or two scoops of ground coffee are added, followed by water, and the entire mixture then stirred. While that brews, a filter is placed into the filter cap and moistened to help it stick in place then the AeroPress cap is placed on top of the column and screwed into place. Lastly, once the desired brewing time is complete the AeroPress is either turned right-side-up and plunged normally or held at an angle and plunged horizontally.

This method is more similar to the French press, particularly the extended brewing time in which the grounds and water sit together. This makes it useful for using grinds that wouldn't be optimal in the official method such as coarse grinds that might be used in a French press.

AeroPress coffee properties

Differences from French press

The AeroPress shares some characteristics with a French press. Differences include:

Aerobie does not recommend reusable mesh filters, saying that coffee made with paper filters has tested better for taste. Aerobie does recognise washing, drying and re-use of the standard paper filters.[11]

See also

References

External links

This article is issued from Wikipedia - version of the 10/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.