Airwave Wave

Airwave Wave
Role Paraglider
National origin Austria
Manufacturer Airwave Gliders
Designer Bruce Goldsmith
Status Production completed
Produced mid-2000s
Unit cost
£1,660 (Wave M, 2004)

The Airwave Wave is an Austrian single-place, paraglider that was designed by Bruce Goldsmith and produced by Airwave Gliders of Fulpmes. It is now out of production.[1]

Design and development

The Wave was designed as a beginner glider, with the three models each named for their relative size.[1]

Variants

Wave S
Small-sized model for lighter pilots. Its wing has an area of 24.94 m2 (268.5 sq ft), 42 cells and the aspect ratio is 5.23:1. The pilot weight range is 65 to 85 kg (143 to 187 lb). The glider model is DHV 1 certified.[1]
Wave M
Mid-sized model for medium-weight pilots. Its wing has an area of 27.06 m2 (291.3 sq ft), 42 cells and the aspect ratio is 5.23:1. The pilot weight range is 80 to 100 kg (176 to 220 lb). The glider model is DHV 1 certified.[1]
Wave L
Large-sized model for heavier pilots. Its wing has an area of 29.27 m2 (315.1 sq ft), 42 cells and the aspect ratio is 5.23:1. The pilot weight range is 95 to 120 kg (209 to 265 lb). The glider model is DHV 1 certified.[1]

Specifications (Wave M)

Data from Bertrand[1]

General characteristics

Performance

References

  1. 1 2 3 4 5 6 Bertrand, Noel; Rene Coulon; et al: World Directory of Leisure Aviation 2003-04, page 12. Pagefast Ltd, Lancaster OK, 2003. ISSN 1368-485X
This article is issued from Wikipedia - version of the 3/19/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.