Akai AX80

AX80

Akai AX80
Manufacturer Akai
Dates 1984
Technical specifications
Polyphony 8 voices
Timbrality 1 sound
Oscillator 2 DCOs plus sub-oscillator per voice[1]
LFO 4 (2 oscillator pitch, one filter, one pulse-width)
Synthesis type Analogue subtractive
Filter 24 dB/octave resonant lowpass; highpass
Input/output
Keyboard 61 keys, velocity sensing
Left-hand control pitch & modulation wheels
External control MIDI, sustain pedal, program footswitch
Akai AX80 synthesizer

The AX80 is a polyphonic analogue keyboard synthesizer manufactured by Akai Professional in 1984.[2] It was Akai's first venture into the professional electronic musical instrument market. The AX80 used digitally controlled oscillators (DCO)[1][3][4] and filter circuitry based on the Curtis Electronics CEM 3372 integrated circuit. It was marketed as part of a line of project studio equipment called the Akai Music Studio System, which included the S612 digital sampler the MR16 drum machine, the MS08 sequencer, and the MG1212 multitrack tape recorder, at a price of $1,695 US.

Features and cabinet

This electronic keyboard is an 8-voice polyphonic, digitally controlled analogue synthesizer. It has 64 memory locations for sounds ("patches"), arranged in two banks of 32 each, plus a bank of 32 factory preset sounds. The instrument has basic MIDI implementation, but lacks the ability to save or restore sounds except by using cassette tape.

Front panel

Figure 1. Fluorescent display of filter parameters

The front panel has a volume knob, a master tuning knob, a data entry knob for programming patches, modulation and pitch wheels with knobs for the depth of the effect, and various buttons to switch on and off modulation destinations, enable chord memory, transpose the keyboard, or infinitely sustain notes. The case is black metal with fluorescent displays to indicate the status of different synthesis parameters (see Figure 1), and black rubberized end pieces.

Back panel

The back panel is unusual in that it is tilted from vertical so that the connectors can be seen from the front of the instrument. There are quarter-inch jacks for recording data to cassette tape, sustain and program change footpedal jacks, MIDI in, out and "thru" DIN connectors, a monaural quarter-inch audio output, a quarter-inch headphone jack, and memory protect and power switches.

Keyboard

The keyboard is five octaves (61 notes, C to C) and is unweighted. It has velocity, but not aftertouch, sensitivity. The output MIDI velocity values span the full range (up to 127), but only discrete "steps" are used (in other words, not every integer value from 1 to 127).

Voice architecture and sound programming

Voice architecture

The synthesizer voices are somewhat similar to those found in the Roland JX-3P or Teisco SX-240, in that there are two oscillators (referred to as "OSC"s) per voice, with the option of sawtooth and/or square waveforms. These oscillators are controlled digitally with analog circuitry used only to create the sawtooth waveshape.[4] OSC2 can be synchronized to OSC1, or the two oscillators can be cross-modulated. The OSCs can be separated by semitone intervals (up to four octaves) and detuned (to approximately a semitone). There is pulse-width modulation of the square wave of OSC1 (with a dedicated low-frequency oscillator (LFO) for this) and a square-wave sub-oscillator that is fixed at one octave lower. OSC2's pitch can be modulated by one of the two ADSR envelope generators, which are dedicated to VCA volume and VCF cutoff frequency. The filter is a 24dB/octave (four-pole) resonant lowpass type, and there is also a separate 12 dB/octave highpass filter that is not envelope controlled.

Tracking of filter cutoff frequency with keyboard position is fully variable, allowing for sounds to become either "brighter" or "darker" as higher notes are played. Keyboard velocity can affect volume and/or filter cutoff.

The modulation section of this synthesizer features four low-frequency oscillators. Three of these each have four available waveforms (sine, square, sawtooth and ramp), and these LFOs are dedicated to filter cutoff, and pitch of each of the two oscillators. These also have a programmable delay before their effect sets in. The fourth LFO is dedicated to pulse-width modulation of OSC1, and only its rate and depth are programmable.

There is also a programmable output level for each patch, to help balance loud and soft sounds. Notably missing from the voice architecture are white noise and portamento.

Performance controls

The AX80 has knobs for master volume and tuning, and a data entry knob that can be used to alter the currently selected parameter in real-time, although the value will jump to the knob's current position. There are various switches to select modulation destinations controlled by the modulation wheel (filter and pitch), to enable chord memory or infinite sustain of notes, and to select or edit sounds. The pitch-bend and modulation wheels also have knobs governing the depth of the effect of each. Footswitches can control sustain or switch sounds by moving up one patch at a time.

MIDI implementation

The AX80 has fairly standard MIDI implementation for an instrument of this vintage, with the ability to use any channel (1-16) for transmission or reception (these can be set separately). The instrument does not recognize the MIDI tuning request, nor does it allow for saving or loading sounds (patches) to a computer via system-exclusive data dumps.

Other information

Accessories

When it was released, Akai advertised various accessories for the AX80: a footswitch (PS-X80), the FC-X80 flight case, HC-X80 hard case, SC-X80 soft case, and a vinyl dust cover (DC-X80).

Use in recorded music

An AX80 appears in the video for Kim Mitchell's song "All We Are", played by Pye Dubois, although the manufacturer's name is blacked out. Greek synth-pop duo Marsheaux and U.K alternative act Spacehotel are also said to use the AX80, as is Mark Bell of LFO on Björk's Homogenic album.

Literature

Full-page advertisements with the slogan "Simply...Awesome!" ran in Keyboard Magazine during the mid-1980s.[5] The AX80 also appears in the price lists at the end of both editions of Mark Vail’s Vintage Synthesizers.[6] The second edition contains a footnote: "If you can get around the interfaces on the Akai AX-series synths, Wes Taggart [of Analogics (Geneva, Ohio, USA)] reports that 'a good-sounding synth lies beneath'".[7] Jim Aikin reviewed the AX80 in Keyboard Magazine in January 1985, noting it has a "warm, full sound, and can deliver a full palette of musically useful tone colors.... an excellent first entry into the keyboard market, by a company that we're sure to be seeing more from."[8] Keyboard also printed a capsule summary in its new product profile "Spec Sheet" feature.[9] There is also a two-page review in Complete Guide to Synthesizers, Sequencers, and Drum Machines, by Dean Friedman.[10]

Reference material

References

  1. 1 2 Akai AX80 Service Manuals 1985
    • AX80 CPU Block Diagram (No.2-1 850321A), p.2
    • AX80 CPU Schematic Diagram (No.6-5 850313A), p.12 — DCOs consisting of a master oscillator, octave dividers, frequency table ROM, and 16 set of programmable counters (for 2OSCs×8voices), are implemented on digital domain.
    • AX80 Voice Block Diagram (No.2-2 850322A), p.3
    • AX80 Voice Schematic Diagram (No.6-6 850314A), p.14 — instead of VCOs, 16 set of Waveshapers with CV input (= charge voltage for controlling the slope of sawtooth waveshape) are implemented on analog domain.
  2. ↑ "Akai Professional / Akai Digital - Product History". Akai Professional M.I. Corp. 1999–2005. (archived on HollowSun.com)
  3. ↑ "Akai Professional AX80". AKAI Professional M.I. Corp. 1999–2005. (archived on HollowSun.com). “The oscillators were analogue but were 'digitally controlled' for better pitch stability and tracking.”
    Note: Gordon Reid 1996 described it as "VCOs rather than DCOs", however, his estimation seems lacking evidence.
  4. 1 2 "Akai AX80 -1984". Global Synthesizer Tech assistance. SoundDoctorin.com. “Circuit Overview: ... exactly what those oscillators are...apparently DCO's as one would think with 16 of them. ... OK UPDATE. Meant to long ago. lol. I got schematics a while back and indeed this is the same type of circuit as the SX-240 etc. Programmable timers generating the base 'oscillations' in this one. Op amps are pulsed with the dco signal in cooperation with a CV signal from actual sample/hold cells that set the ramp rate of the analog circuit there that is generating the sawtooth waves. But of course the square part is digitally from start to finish.”
  5. ↑ Keyboard Magazine, November 1984
  6. ↑ Vail 2000, p. 260,300
  7. ↑ Vail 2000, p. 303
  8. ↑ Aikin, Jim. "(review)". Keyboard Magazine. No. January 1985. pp. 76–78.
  9. ↑ "(spec sheet)". Keyboard Magazine. No. September 1985. p. 88.
  10. ↑ Friedman, Dean (1985). Complete Guide to Synthesizers, Sequencers, and Drum Machines. Music Sales Corp. pp. 16–17. ISBN 978-0-8256-2410-0.

Bibliography

Other sources

External links

This article is issued from Wikipedia - version of the 11/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.