Alabama and Gulf Coast Railway

Alabama and Gulf Coast Railway

AGR EMD GP40 No. 4028
Reporting mark AGR
Locale Alabama, Florida and Mississippi
Dates of operation 1997 (1997)–
Track gauge 4 ft 8 1⁄2 in (1,435 mm)
Length 348 miles (560 km)
Headquarters Monroeville, Alabama
Website Official website

The Alabama and Gulf Coast Railway (reporting mark AGR) is a Class II railroad[1] owned by Genesee & Wyoming. It operates 348 miles (560 km) of track[2] from the Pensacola, Florida export terminals, west of downtown, north to Columbus, Mississippi, with trackage rights along BNSF Railway to Amory, Mississippi. A branch uses trackage rights along Norfolk Southern from Kimbrough, Alabama west and south to Mobile, Alabama, with separate trackage at the end of the line in Mobile.

History

Predecessor lines

The current AGR is composed of numerous lines built during the late 19th and early 20th centuries, which were gradually consolidated into a system that was purchased by the St. Louis – San Francisco Railway and remained under that railroad or its successor's control until 1997, when it was spun off into an independent company.

Pre-1922

The earliest ancestor of the AGR was the Pensacola and Mobile Railroad and Manufacturing Company, which in 1861 constructed 5 miles (8.0 km) miles of track between Muscogee, Florida and Cantonment, Florida. This line was dismantled by Confederate forces during the Civil War so that the iron rails could be used elsewhere.[3] The railroad was not rebuilt until 1877. In 1874, the company took control of the Pensacola and Perdido Railroad, which ran west from Pensacola about five miles to a lumber mill at Millview, Florida on Perdido Bay. In 1892, the system merged with the Pensacola, Alabama and Tennessee Railroad, which connected the Millview and Muscogee branches. Shortly thereafter, the railroad was renamed the Gulf Ports Terminal Railway.[4]

In 1910, the Gulf Ports Terminal Railway was acquired by Southern States Lumber, which operated 68 miles (109 km) of track to move lumber from forests in Baldwin County, Alabama, to its large mill at Muscogee, and on to the port of Pensacola for export. The combined system had a total length of around 80 miles (130 km).[4]

In 1911, the railroad was acquired by the Gulf, Florida, and Alabama Railway. Soon after, construction of a line from Cantonment to Pensacola was begun, being completed in 1913. Almost immediately following the completion of this line, another, much longer line was begun, this one from Cantonment north via Atmore and Frisco City, Alabama to an interchange with the Southern Railway at Kimbrough, Alabama. The line, including a large bridge over the Alabama River, was completed in 1915.[4]

1922-1997

In 1922, the Gulf, Florida, and Alabama Railway was acquired by the Muscle Shoals, Birmingham and Pensacola Railroad (MSB&P), which only three years later was bought by the Frisco (St. Louis – San Francisco Railway). After the acquisition, the Frisco constructed a line from Aberdeen, Mississippi to Kimbrough, connecting the former MSB&P with the rest of the Frisco's system. This line was completed in 1928.

During the middle of the 20th century, the railroad operated as part of the Frisco, moving bulk products south to Pensacola for export and produce products north, although chemical and paper products took on increased importance by the 1970s. Passenger service over the line continued until 1955, when the Sunnyland, operating between Pensacola and Kansas City, Missouri, via Amory, Mississippi, and Memphis, Tennessee, was discontinued.

In 1980, the Frisco was acquired by the Burlington Northern Railroad (BN), itself a product of a merger of several railroads in 1970. In 1995, the BN merged with the Atchison, Topeka and Santa Fe Railway to form the BNSF Railway.

Current railroad

In 1997, when BNSF spun off the route between Kimbrough and Pensacola, the Alabama and Gulf Coast was formed to take over operations. In 2003, BNSF sold additional trackage to the AGR: a line between Kimbrough and Columbus, Mississippi, as well as isolated trackage near Mobile, Alabama. As part of this deal, the AGR gained trackage rights on BNSF between Columbus and Amory and on the Norfolk Southern Railway between Mobile and Kimbrough.[4]

In 2002, the AGR, which had been formerly owned by States Rail, Inc., a short-line holding company, was acquired by RailAmerica.[2][4] In late 2012, Genesee & Wyoming acquired the railroad as part of its acquisition of RailAmerica.

Traffic

The railroad's traffic comes mainly from industrial materials such as metals, coal, paper products, chemicals, and limestone. The AGR hauled around 61,000 carloads in 2008.[2]

Connections

Connections are made at the following locations:

See also

References

  1. ↑ "2013 Alabama Rail Directory" (PDF). Alabama Department of Transportation. June 2014. Archived from the original (PDF) on 3 March 2015. Retrieved 3 March 2015.
  2. 1 2 3 "RailAmerica's Empire". Trains Magazine. Kalmbach Publishing. June 2010.
  3. ↑ "Pensacola & Mobile". Confederate Railroads. Retrieved 5 April 2011.
  4. 1 2 3 4 5 "History of the Alabama and Gulf Coast Railway". The Unofficial AGR Railfan Site. Archived from the original on 19 September 2011. Retrieved 16 July 2010.

External links

Wikimedia Commons has media related to Alabama and Gulf Coast Railway.

Coordinates: 31°35′35″N 87°24′37″W / 31.59304°N 87.41031°W / 31.59304; -87.41031

This article is issued from Wikipedia - version of the 10/17/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.