Amfibia

From design archive of the Petrodvorets watch factory Raketa. dated 1968. original in the Museum in Peterhof
From design archive of the Petrodvorets watch factory Raketa. dated 1985. original in the Museum in Peterhof - 24 hours dials

In the Soviet clock industry an Amfibia watch was what the west would call a "Diver" watch. Produced in great quantities for the Soviet and Russian military, these watches gained great popularity worldwide. The Vostok Amphibia or Raketa Amphibia are Russian diving watch created respectively in 1967 and 1968 for the USSR's navy.[1]

Design

Amphibia Vostok

The Amphibia design was led by Vostok's chief of their new design bureau. The objectives were to create a watch that was competitive with contemporary diving watch such as the Blancpain 50 Fathoms, the Rolex Submariner, and the watches using the compressor case, and to create a watch that could operate reliably at the temperature and pressure of a depth of 200 meters (and later 300 meters). The chief designers were Mikhail Fedorovich Novikov and Vera Fedorovna Belova.

The Amphibia is the embodiment of possibly the most simple concept for creating a watertight case. The basic principle is to use the outside pressure to create the seal needed to prevent water from entering the case. The further the case sinks, the higher the outside pressure, the higher pressure is exerted on the case, creating a dynamically tighter seal. This is opposed to the idea where you create a case that creates the pressure to withstand 20ATM of pressure no matter what pressure it experiences (1 ATM at sealevel, for instance). This is a design similar to the western compressor case, a patent for which was filed at least as early as 1954, and granted in '56(US pat. 2,737,009). The advantage of the compression design is that you do not need to tighten any of the seals to a pressure that would withstand 20ATM, it also eliminates several pieces required to create such a seal.

The Amphibia's crystal is 3mm thick lucite(50% thicker than standard) that is ground like a precision lens to create a very good size and seal. The lucite deforms plastically by a half millimeter under pressure whereas the slightest deformation of a glass or sapphire crystal would crack it. This allows a much lighter, smaller, cheaper crystal to be used. It also does not require the extra rubber seals and a very high pressure crystal retaining ring.

While a traditional caseback gasket would experience shear forces with the rotation of a screwback case used for a traditional hermetic case that would leave the gasket permanently compressed, making it unable to return to its original shape and unsuitable for reuse, the Amphibia uses a very wide sintered gasket. This solved a problem found during the design where when surfacing, the gasket which had been compressed by 20-30% decompressed slower than the pressure on the caseback, critically weakening the seal. To fix the problem of the O-Ring shear, they used a bayonet mount held in place by a nut. This use of a very large gasket distributes the force of the pressure which can be a problem with O-rings.

The case is made of stainless steel. The thickness of the caseback is 1MM, double the regular thickness. The crown screws down with a gasket to prevent water from entering from the stem opening. The stem incorporates a clutch to protect it from lateral forces. This clutch gives the stem a wobbly feel as it doesn't engage unless you pull the crown away from the watch.

The watch includes a rotating bezel which is used to mark the time you first submersed. The dial and hands also have luminescent so that the watch can be read in the darkness of ocean depths.

Amphibia Raketa

There has been a few designs of Raketa's Amphibian watches, the first where designed in 1968 by Serebriakov from the Raketa Design Studio. Much larger than the Vostok Amphibia, the Raketa Amphibia was actually produced in more limited series for special orders from Navy and other military departments.[2]

Evolution

Amphibia Vostok

The Amphibia was first equipped with the Vostok 2209 movement, a manual wind movement with no calendar. Later models used the Vostok 2409 and 2414 which added a date complication, and the 2416 which is an automatic movement that winds itself any time the watch is moved. The dateless version of the 2416, the 2415 was used in the reissue of the 1967 Amphibia.

There was a problem including traditional built in lugs with the new stainless steel Amphibia case, so for the first case design, model 350, fixed lugs were added on. Later versions included attached lugs that swung before they incorporated integral lugs to the case. Later model cases include the integral lug model (420), the hexagon case, the ministry case (710), and the new curvy 060, and the tonneau/paddle model.

Currently Amphibia line of watches (Classic) have eight different models of cases and Amfibia line has one.

Amphibia Raketa

In the 60's and 70's the Raketa Amphibia was equipped with movement "Raketa 2609" The new design finished in 2014 is equipped with the new movement Raketa Avtomat.

Features

The modern Amphibias have:

Amphibia Raketa vs Vostok Power reserve Water resistance Luminecence
Raketa 48 hours, self-winding automatic movement 40 ATM Super luminova
Vostok 31 hours, self-winding automatic movement 20 ATM classic luminova

Culture references

See also

References

  1. ↑ Russian Watches Museum from Peterhof
  2. ↑ http://www.watchrussia.com/articles/raketa-amfibiya-dlya-ekstremalov

External links

This article is issued from Wikipedia - version of the 8/27/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.