Angler's loop
Angler's loop | |
---|---|
Names | Angler's loop, Perfection loop |
Category | Loop |
Releasing | Jamming |
Typical use | Fishing, forming a fixed loop in bungee cord |
ABoK | #1017, #1035, #2067 |
Instructions |
An Angler's loop is a type of knot which forms a fixed loop. Useful for fine or slippery line, it is one of the few loop knots which holds well in bungee cord. It is quite secure but it jams badly and is not suitable if the knot will need to be untied.
Tying
Angler's loop may be tied
- alone and then used,
- it may be tied through an object (typically a ring),[2]
-
Start with a loop near the working end
-
Continue with two loops around standing end
-
one large and one small in the middle
-
Pull the large loop over the small (working end) and through the first loop
-
Tighten pulling in all three directions.
Angler's loop may be tied around the hand, it may also be tied this way one handed, or with several loops if need be:
-
Hold the working end, loop the standing end 3 times around the palm
-
Pull the outmost loop inwards under the first two
-
Pull the next outmost over the one(s) in the middle and under the now innermost loop
-
Pull the now innermost loop(s) and the standing end to tighten.
-
Done.
- Angler's loop may be locked additionally with half hitches
- Angler's loop may be fashioned with several loops (then locking may be necessary)
Structure
Overhand knot on standing part and half-hitch by the working end.
See also
References
- ↑ https://www.youtube.com/watch?v=CocXkMwxU6Y, video showing how to tie Angler's loop at high speed in an emergency
- ↑ https://www.youtube.com/watch?v=BEIQx45ZIfM video showing how to tie Angler's loop through an object.
External links
- Video instructions on how to tie the Angler's loop / Perfection loop
- Grog. "Perfection (angler's) loop". Animated Knots. Retrieved April 2013. Check date values in:
|access-date=
(help)