Array gain

Antennas
Part of a series on

Common types Dipole Fractal Loop Satellite dish Television Whip
Components Balun Block upconverter Coaxial cable Counterpoise (ground system) Feed Feed line Low-noise block downconverter Passive radiator Receiver Rotator Stub Transmitter Tuner Twin-lead
Systems Antenna farm Amateur radio Cellular network Hotspot Municipal wireless network Radio Radio masts and towers Wi-Fi Wireless
Safety and regulation Mobile phone radiation and health Wireless electronic devices and health International Telecommunication Union (Radio Regulations) World Radiocommunication Conference
Radiation sources / regions Boresight Focal cloud Ground plane Main lobe Near and far field Side lobe Vertical plane
Characteristics Array gain Directivity Efficiency Electrical length Equivalent radius Factor Friis transmission equation Gain Height Radiation pattern Radiation resistance Radio propagation Radio spectrum Signal-to-noise ratio Spurious emission
Techniques Beam steering Beam tilt Beamforming Bell Laboratories Layered Space-Time (BLAST) Multiple-input multiple-output (MIMO) Reconfiguration Spread spectrum Wideband Space Division Multiple Access (WSDMA)

In MIMO communication systems, array gain means a power gain of transmitted signals that is achieved by using multiple-antennas at transmitter and/or receiver, with respect to single-input single-output case. It can be simply called power gain. In a broadside array, the array gain is almost exactly proportional to the length of the array. This is the case provided that the elements of the antenna are not spaced to a point at which large radiation side lobes form in other directions and that the array length exceeds one or two wavelengths. The power gain of a broadside array is nearly independent of the number of broadside elements as long as both of these conditions are met.^[1]

The two main types of array gain when combining signals are average power of combined signals relative to the individual average power and the diversity gain related to the probability level of outage. The diversity gain is dependent on spatial correlation coefficients between antenna signals.^[2]

Applications

In radio astronomy because of background noise from modern communications it is difficult to achieve a good signal to noise ratio. Even for strong astronomical radio emission it is typical for SNR levels to be below 0 decibel. To counter this problem exposure of the antenna to the source over large periods of time are needed just as in visible sky viewing. Array gain is done by using multiple, even dozens of radio receivers to collect as much signal as possible.

Robots equipped with antenna arrays have better communication using array gain to eradicate dead spots and reduce interferences.^[3]

References

↑ "Power Gain of a Broadside Array of Antenna Elements". Smeter.net. Retrieved 2012-08-06.
↑ Andersen, J.B.; , "Array gain and capacity for known random channels with multiple element arrays at both ends," Selected Areas in Communications, IEEE Journal on , vol.18, no.11, pp.2172-2178, Nov 2000 doi:10.1109/49.895022
↑ Hambling, David. "Robots fall into line with the help of sparse array antenna." New Scientist 207 (2010): 22. OmniFile Full Text Mega. Web. 24 Apr. 2011.

Array gain

Applications

References

See also