Beader

A beader is a person who installs plastic moulding strips into slotted edges of metal tabletops using a mallet and bandsaw.

The beader positions the centre of the moulding strip over the leading edge of the tabletop as it moves along a conveyor and pushes the tongue of the molding into a slot along the entire edge of the tabletop, pounding the moulding with a mallet to seat it firmly in the slot.

The tabletop is then lifted from a conveyor onto a worktable where the beader cuts off overlapping ends of molding using a bandsaw and pounds the trimmed ends of the moulding into the slot to form a tight joint.

A beader also heats the moulding strips in a hot water tank prior to installation if specified by the job order.

A beader uses beads to create many kinds of decorative items.

This article is issued from Wikipedia - version of the 1/6/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.