Berkeley Cars

For the 1913 British car manufacturer - see Berkeley (1913)
Berkeley Cars Ltd.
Industry Motor vehicle
Fate bankruptcy
Founded 1956
Defunct 1960
Headquarters Biggleswade, England, UK
Key people
 Charles Panter, Lawrie Bond
Products SA322, SE328, SE492, T60, B95, B105

Berkeley Cars Ltd /ˈbɑːrkliː/ of Biggleswade, Bedfordshire, England produced economical sporting microcars with motorcycle-derived engines from 322 cc to 692 cc and front wheel drive between 1956 and 1960.

History

The Berkeley automobile was a collaboration between designer Lawrence "Lawrie" Bond and the Berkeley Coachworks factory owned by Charles Panter, which at the time was one of the largest manufacturers of caravans in Europe.[1] It was an ideal project for Berkeley, who had developed considerable skills in the use of Glass-reinforced plastic[2] (GRP), and were looking for something to fill the gaps in the very seasonal caravan market. What Panter and Bond wanted to achieve was "something good enough to win World 750cc races... but cheap, safe, easily repairable and pretty."[3]

The early cars were an immediate success on the home market, and several derivative models were spawned over the four years of car production. Export markets, most notably the United States, were exploited and the cars earned a reputation for fun, if fragile, sports motoring on a budget. Recognising the threat posed by the newly introduced Mini and Austin-Healey Sprite in the late fifties, the company started to develop are a more conventional model with the support of Ford.

The caravan market collapsed towards the end of 1960, and Berkeley's poor cash flow forced the company into liquidation on 12 December 1960, taking its car manufacturing activities with it. After having produced about 4100 cars of various types, the workforce was laid off shortly before Christmas that year. An attempted sale of the company to Sharp's Commercials Ltd (manufacturer of the Bond Minicar) came to nothing,[4] and the company's assets were liquidated in 1961.

The factory was later used by Kayser Bondor Ltd to make women's underwear, but it was demolished in 2002 and the site turned over to housing. A road named 'Berkeley Close' in the housing estate provides the only obvious link to the car factory.

Today there is an active owner's club (the Berkeley Enthusiasts' Club), which provides a range of parts and services aimed at preserving the remaining few hundred cars known to survive worldwide.

Models

Sports (SA322)

Berkeley Sports SA322
Overview
Production Oct 1956 - Jan 1957
163 produced[5]
Body and chassis
Body style 2-door roadster
Powertrain
Engine 322cc transverse two stroke twin, air-cooled
Dimensions
Wheelbase 70 in (1,800 mm) [6]
Length 123 in (3,100 mm) [6]
Width 50 in (1,300 mm) [6]
Height 41.5 in (1,050 mm) [6]
Curb weight 605 lb (274 kg) [6]

Berkeley's first production car was the 'Sports' (type SA322), announced in September 1956[6] and produced from October 1956 to January 1957. Production began with two prototypes (registered RMJ395 and RMJ946), which were seen being tested with enthusiasm around the neighbourhood of Biggleswade in the late summer of 1956. Stirling Moss drove one at Goodwood in September, and the car was launched to the public at the 1956 London Motor Show – one year ahead of the Lotus Elite, which was also to be of fibreglass monocoque construction.

Bond's attractive 2-seater open tourer design capitalised on Berkeley's GRP experience, and consisted of three large mouldings (floor or 'punt', nose, tail) with no conventional chassis.[6] The front edges to the doors slanted forward so that when the doors were opened they hinged upwards and then closed by themselves. Although usually configured as a two-seater with simple bench seat, a hatch could be removed from behind the front seat, revealing a compartment normally containing the spare wheel and some luggage space which could double as a basic seat for a small child.[6] Equipment was basic, even the fuel gauge was an optional extra.

Power was provided by a British Anzani twin-cylinder 322 cc two-stroke engine producing 15 bhp (11 kW; 15 PS)[7] and mounted transversely, driving the front wheels via a chain and three-speed gearbox. The engine was already used by various motorcycle manufacturers such as Cotton and Greeves, but in the Berkeley was fitted with a Siba Dynastart to provide both battery charging and electric starting. It was a very advanced two-stroke engine which incorporated a rotary inlet valve mechanism in the centre of the crankshaft.[7] The gearbox was a three-speed Albion HJR5, utilising a steering column-mounted gearchange.[6]

The car had all-round independent suspension by coil springs and in spite of the tiny engine gave remarkably good performance owing to its light weight (kerb weight 605 lb (274 kg)[6]) and excellent roadholding. Girling hydraulic brakes with 7 in (180 mm) drums were used.[6]

The identification plate was a plain stamped alloy rectangle fitted on the engine bay side wall just above the Dynastart and marked SA322 B1 etc. (Sports Anzani 322cc Berkeley Chassis number 1).

Sports (SE328)

Berkeley Sports SE328
Overview
Production Jan 1957 – Apr 1958
1259 approx produced.[5]
Body and chassis
Body style 2-door roadster
Powertrain
Engine 328cc transverse two stroke twin, air-cooled
Dimensions
Wheelbase 68 in (1,700 mm) [8]
Length 122.5 in (3,110 mm) [8]
Width 50 in (1,300 mm) [8]
Height 43.5 in (1,100 mm) [8]
Berkeley SA328 Excelsior engine

After 163 of the SA322 cars had been manufactured, a change was made to the SE328 model with a 328 cc Excelsior engine offering 18 bhp (13 kW; 18 PS). The production run ran from Jan 1957 to April 1958 with chassis numbers from 164 to 1422, many being exported to the United States where it sold for approximately $1600 (equivalent to $13.5 thousand today). The manufacture touted the number 70, meaning it could reach 70 mph and had an average fuel economy of 70 mpg. The export model was differentiated by having separate headlamps whereas on the home market they were faired into the wings, although the export type lamps could be specified.[9]

Early cars from Jan 1957 to about chassis number 476 in June 1957 still used a column gear change. During their production run a Deluxe model was offered which was bodily the same but featured polished wheel trims and spinners, tachometer and twin carburettors. The chassis plate was similar to the Anzani type on the early cars but was later changed to a printed type fitted to the bulkhead above the brake master cylinder. The printed type chassis plate had type ‘SE328’ printed on it. Most of these cars had the three-speed gearbox similar to the Anzani except for the mounting flanges. All of the cars had the sloping leading edges to the doors.

Motor magazine tested a 328 cc Berkeley in 1957 and found it to have a top speed of 62.1 mph (99.9 km/h) and acceleration from 0-50 mph (80 km/h) in 30.6 seconds. A fuel consumption of 58.3 miles per imperial gallon (4.85 L/100 km; 48.5 mpg-US) was recorded. The test car cost £574 on the home market including taxes of £152[8] (equivalent to £12.5 thousand today).

The SE328 enjoyed considerable success and press exposure through their involvement with lightweight motor racing, and their famous drivers included Pat Moss who drove one in the 1958 Liège-Brescia-Liège rally for cars up to 500cc. The Berkeley team – a works-supported entry of six cars including BBC commentator Robin Richards – led as far as Slovenia, but slow climbing in summer heat found their weakness and Pat ended up being towed back to Italy by another Berkeley. None of the Berkeleys finished the event.

Sports and Twosome (SE492)

Berkeley Sports SE492
Overview
Production Oct 1957 – Mar 1959
666 approx produced.[5]
Body and chassis
Body style 2-door roadster
Powertrain
Engine 492 cc transverse two stroke three cylinder, air-cooled
Dimensions
Wheelbase 70 in (1,778.0 mm)[10]

In late 1957 a new derivative model was introduced, using a 30 bhp (22 kW; 30 PS), Excelsior three-cylinder 492 cc engine with triple carburettors. This engine configuration was made possible by the vertically split crankcase of the Excelsior engine and modular crankshaft and barrels, which made adding a central cylinder relatively easy. A four speed gearbox was standardised. The top speed was now 80 mph (130 km/h). The production ran from October 1957 to March 1959 with chassis numbered 1 to 666. From about October 1958, in order to coincide with the introduction of the 'Foursome' (see below), they were renamed the ‘Twosome’. Also at the 1958 Motor Show a Fixed Head (or Hardtop) was announced and displayed that had external as well as the usual internal door handles, but there are no records that this body style actually reached production.

It is probable that cars pre chassis number 120 (approx), about April 1958, had similar bodies to the early Berkeley “Sports” cars. Cars from about April 1958 to the end of production had vertical front door edges and internal door hinges, as well as body moulding and a few mechanical changes. Early cars were fitted with the four speed TR gearbox whilst later cars had the larger and stronger VR gearbox.

The cars enjoyed some success in Motor Sport and Giovanni Lurani bought three which he took to Italy, fitted them with his own design of hardtop, and running them in the 750 cc GT class, one driven by Lorenzo Bandini finishing first in the 1958 Monza 12 hour race.

Reliability, always questionable with the air-cooled two-strokes, became more of an issue with the extra heat generated by the triple, and there are many recorded reports of warranty claims. At one point the US authorities appear to have stopped a shipment of Berkeleys at the dock pending rectification of what they considered a serious design issue. There seems little doubt that profitability of the Berkeley programme was impacted as a result of these claims and the aggressive export drive to markets not familiar with the eccentricities of British sports motoring.

Foursome

Berkeley Foursome
Overview
Production 1958–1959
20 approx produced.[5]
Body and chassis
Body style 2-door roadster
Powertrain
Engine 492 cc transverse two stroke three cylinder, air-cooled
Dimensions
Wheelbase 78 in (1,981.2 mm)[11]
Length 131 in (3,300 mm)[11]
Width 54 in (1,371.6 mm)[11]
Height 46 in (1,200 mm)[11]

Announced in October 1958, this model was wider and longer than its forebears and differed structurally in that the rear swinging arms were lower and external to the body, and the spare wheel was mounted at the rear of the car. The type reference is supposed to be SE492/4 but one has the reference B.100. The chassis numbers are D1/1 to D1/19 but then again one example has D1/100, this particular car could be the prototype since it appears in publicity pictures.

The list price of the Foursome was £700 including Purchase Tax, with an additional £28 for the optional hardtop[11] (equivalent to £14.7 thousand and £587 today).

B95 and B105

Berkeley B95 and B105
Overview
Production Mar 1959 – Dec 1960
178 approx produced.[5]
Body and chassis
Body style 2-door roadster
Powertrain
Engine 692 cc transverse four stroke twin, air-cooled
Dimensions
Wheelbase 70 in (1,778.0 mm)[10]
Length 125 in (3,200 mm)[5]
Width 50 in (1,270.0 mm)[10]
Height 45 in (1,143.0 mm)[10]
Curb weight 886 lb (402 kg)[12]

The B95 and B105 models were launched at the 1959 Geneva Motor Show and boasted more power from twin-cylinder Royal Enfield 692 cc four-stroke engines, with the 40 bhp (30 kW; 41 PS) Super Meteor engine in the B95 and the 50 bhp (37 kW; 51 PS) Constellation unit in the B105 which could reputedly exceed the magic 100 mph (160 km/h). The engines featured Berkeley-design primary chain cases to accommodate a Lucas Bendix starter motor, an external Lucas dynamo mounted above the gearbox, and a duplex (or double-row) chain drive to the differential. Kerb weight increased to 402 kg (886 lb). B95 engine numbers have the unique prefix 'SMTB', while B105 engines are prefixed 'SMUA'.

The prototype car was SE492 chassis number 638, which was modified to add bracing to withstand the extra power and weight of the four-stroke engine, a taller bonnet (US hood) with large grille to accommodate the engine, and unfaired headlights. In mid-February 1959 this car spent two weeks at the Royal Enfield factory, during which time it covered 500 miles of general road use and 1,000 mi (1,600 km) of endurance testing at MIRA.

By the time of the press release announcing the launch of the B95 in March 1959, a further 2,500 mi (4,000 km) of road and track tests had also been carried out by Berkeley factory drivers. Perhaps to address the reputation for breaking down that the two-strokes had developed, especially in export markets, it was emphasised by the factory that during this testing there had been no involuntary stops or any form of mechanical failure, and that further testing would be performed until a total of 15,000 mi (24,000 km) had been completed.

At its launch, the B95 cost £659 (equivalent to £13.8 thousand today). Chassis numbers followed on from the SE492 series, and chassis number 670 (the earliest known B95) was registered at the end of March 1959. The first B105, chassis number 686, was delivered about one month later. Series production continued to chassis number 835. A separate batch of about 12 cars (chassis numbers 850 to 861) appear to have been made for Mantles Garage in the summer of 1960, which utilised some chassis parts and the bucket seats of the T60.

About 178 B95 and B105 models were made in total, of which approximately 15 to 20 cars were sold to export markets.

QB95 and QB105

Berkeley QB95 and QB105
Overview
Production 1959
2 approx produced.
Body and chassis
Body style 2-door roadster
Powertrain
Engine 692 cc transverse four stroke twin, air-cooled
Dimensions
Wheelbase 78 in (1,981.2 mm)[10]
Length 133.5 in (3,390 mm)[5]
Width 54 in (1,371.6 mm)[10]
Height 46 in (1,168.4 mm)[10]

In October 1959 the Q range was announced, with longer and wider bodies the same dimensions as the Foursome. The wheelbase went up from 70 inches (1,800 mm) to 78 inches (2,000 mm) and the track from 42 inches (1,100 mm) to 46 inches (1,200 mm). The Qs were four seaters (just), although the QB version dispensed with the rear seat to give extra luggage space. The only 'official' mention comes from the Autocar magazine's Motor Show edition of October 1959, when it appears that Berkeley's stand featured a red soft-top QB95 and a blue QB105 with a black hard-top. From this single reference it is assumed that Berkeley built at least two models of this series, although none are thought to have survived.

T60

Berkeley T60
Overview
Production Sept 1959 – Dec 1960
1800 made[5]
Body and chassis
Body style 2-door roadster
Powertrain
Engine 328 cc transverse two stroke twin, air-cooled
Dimensions
Length 122.5 in (3,110 mm) [5]

Surprisingly late-on in the British microcar boom of the 1950s, Berkeley's only three-wheeler model was not introduced until September 1959. It was an instant success in the UK where three-wheelers could legally be driven on a motorcycle licence, so were suitable for a motorcyclist with family. Another advantage was that the purchase and road tax fees for three-wheelers cost considerably less than four-wheeled vehicles. Thus at its launch, the T60 only cost £400 (equivalent to £8.39 thousand today).

They were fitted with the 328cc Excelsior Talisman engine like the older SE328, and the four speed and reverse type VR gearbox, and were available as both soft and hardtops. The chassis plate, mounted on the bulkhead above the brake master cylinder, was the printed SE328 type but with 'T60' stamped in the chassis number block along with the chassis number. Chassis numbers run from 1 to approximately 1800. The first 600 cars (approximately) had a bench seat with an umbrella-type pull handbrake and aluminium reinforcement sections in the punt body section. Cars thereafter had steel punt chassis sections, bucket seats and a floor-mounted handbrake lever.

In their road test of October 1959, The Motor Cycle magazine described the car as "a fascinating, front-wheel-drive sports car which combines economy with liveliness and superb cornering."[12]

Drive was still to the front wheels through a four-speed gearbox, but a trailing arm replaced the swing axle independent suspension of the four-wheeled cars. The very last cars had a revised ‘unit’ front and rear suspension layout, presumably to stop the bridge over the differential from breaking and the rear damper top mount detaching itself from the car.

T60/4

Berkeley T60/4
Overview
Production Oct – Dec 1960
approx 50 made[5]
Body and chassis
Body style 2-door roadster
Powertrain
Engine 328 cc transverse two stroke twin, air-cooled
Dimensions
Length 122.5 in (3,110 mm) [5]

The T60/4 was produced from October 1960 and are mechanically and outwardly similar to the late T60. It was the same length and width as the standard T60, but differed in having extra room in the back for two seats, the additional space being created by a revised rear body moulding, thus creating proper seats in the back for two children. The rear bench seat was fastened to the car and the centre backrest had a bulge in it because of the revised rear wheel arch. The Car was available in both soft-top and hardtop forms. These cars used the revised front and rear suspension layouts used on the very late T60’s.

The T60/4 had its own series of chassis numbers, prefixed "T60.4" and followed by a serial number. About 50 were made.

Both variants of T60 were in production at the time the company was declared insolvent in December 1960.

B65

Berkeley B65
Overview
Production Sept - Dec 1960
Less than 20 produced.[5]
Body and chassis
Body style 2-door roadster
Powertrain
Engine 492 cc transverse two stroke three cylinder, air-cooled
Dimensions
Wheelbase 70 in (1,778.0 mm)[10]

The B65 was announced in September 1960 to complement the T60, B95 and B105. They were bodily the same as late SE492, complete with the lower front right hand side bulge in the punt to accommodate the larger 492cc engine, but were fitted with the 328cc Excelsior engine. Although logically these cars should have run from chassis number 1422 to 1520, it seems more likely that chassis numbers ranged from 1500 to 1520. Very few of these cars are known to exist and the ones that do seem to suggest a production run of about 20 cars or less. The type reference marked on the chassis plate is B65.

Bandit

Berkeley Bandit
Overview
Production 1960
2 made[5]
Body and chassis
Body style 2-door roadster
Powertrain
Engine 997 cc longitudinal four stroke four-cylinder, water-cooled
Dimensions
Wheelbase 82 in (2,082.8 mm)[10]
Length 143 in (3,600 mm) [5]
Width 54 in (1,371.6 mm)[10]
Height 44 in (1,117.6 mm)[10]

For 1961 the intention was to move into the mainstream sportscar market with the Bandit designed by John Tojeiro.[5] This was to be powered by the 997 cc Ford engine (as in the 105E Anglia) with Berkeley-designed MacPherson strut front and independent rear suspension. The car had a complex sheet steel chassis, braced by a GRP floor which was riveted to it, and boasted 8in diameter Girling disc brakes at the front. This made the design more conventional than earlier models, but still retaining a distinctive design and relatively light weight.

The cost of the development programme exacerbated the financial difficulties facing the company at the end of 1960, and despite active involvement in the project from Ford the Bandit failed to survive Berkeley's insolvency. Only two prototypes were produced; the original Motor Show and press car registration number 700CNM, which has since been restored, and a second prototype car registered YRX292, which had a 1340cc Ford Classic engine. This car was sold in Dursley in 1966 and was last seen in Swindon in the late 1960s.

The car was to have sold for £798, equivalent to about £16 thousand today,[5] which would have made it more expensive than the Mini and Austin-Healey Sprite.

Replicas

In the 1980s a new company was formed in Syston, Leicestershire, to restore Berkeley cars. By 1991 it was using the original moulds to make new body panels and in 1993 complete T60 cars were being made with a new ladder type chassis.[13] A choice of engines was available, including Mini, Citroen 2CV and motorcycle units.

In the late 1980s, in Auckland, New Zealand, a few cars called the 'Ibis Berkeley' were made that paid homage to the Berkeley—but using Mini front and rear subframes and a fibreglass monocoque 6 inches wider. Sold as complete body units to accept Mini parts by Ian Byrd and Tim Monck-Mason, these were advanced little cars using carbon fibres and foam beams. This later became the WASP looking more like a scaled down Cobra. [13]

See also

References

  1. ↑ 'The Berkeley - a moulded miniature' Autocar September 14, 1956
  2. ↑ 'The Berkeley Car' The Motor, Sept 12th 1956
  3. ↑ "50's Superbomb!" Sporting Cars February 1983
  4. ↑ Wotherspoon, Nick (1993). 'Lawrie Bond - the man and the marque. Oxford: Bookmarque. ISBN 1-870519-16-7.
  5. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Robson, G. (2006). A-Z of British Cars 1945–1980. Devon, UK: Herridge Books. ISBN 0-9541063-9-3.
  6. 1 2 3 4 5 6 7 8 9 10 11 John Bolster tries the Berkeley, Autosport Magazine, Sept 21 1956
  7. 1 2 Modern Engines - 322cc British Anzani Uni-Twin, The Motor Cycle, May 17, 1956
  8. 1 2 3 4 5 "The Berkeley Sports two-seater". The Motor. 3 April 1957.
  9. ↑ "Economy Sports Car: "The $1600 Berkeley." Popular Mechanics, July 1957, p. 121, bottom of page.
  10. 1 2 3 4 5 6 7 8 9 10 11 Culshaw; Horrobin (1974). Complete Catalogue of British Cars. London: Macmillan. ISBN 0-333-16689-2.
  11. 1 2 3 4 5 'Berkeley Fousome' Autocar October 24, 1958
  12. 1 2 "Road Impressions of new models". The Motor Cycle. 1959-10-15. Retrieved 2010-04-07.
  13. 1 2 Georgano, N. (2000). Beaulieu Encyclopedia of the Automobile. London: HMSO. ISBN 1-57958-293-1.

External links

Wikimedia Commons has media related to Berkeley vehicles.
This article is issued from Wikipedia - version of the 11/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.