Antimony trichloride

Antimony trichloride
Names
Preferred IUPAC name
Antimony trichloride
Systematic IUPAC name
Trichlorostibane
Other names
Antimony(III) chloride, Butter of antimony, Antimonous chloride, Stibous chloride, Trichlorostibine
Identifiers
10025-91-9 YesY
3D model (Jmol) Interactive image
ChEBI CHEBI:74856 N
ChemSpider 23199 YesY
ECHA InfoCard 100.030.031
EC Number 233-047-2
KEGG C15235 N
MeSH Antimony+trichloride
PubChem 24814
RTECS number CC4900000
UNII J281401KK3 YesY
UN number 1733
Properties
Cl3Sb
Molar mass 228.11 g·mol−1
Appearance Colorless solid, very hygroscopic
Odor Sharp, pungent
Density 3.14 g/cm3 (25 °C)
2.51 g/cm3 (150 °C)[1]
Melting point 73.4 °C (164.1 °F; 346.5 K) [2]
Boiling point 223.5 °C (434.3 °F; 496.6 K)
601.1 g/100 mL (0 °C)[1]
985.1 g/100 mL (25 °C)
1.357 kg/100 mL (40 °C)[3]
Solubility Soluble in alcohol, CH2Cl2, phenyls, ether, dioxane, CS2, CCl4, CHCl3, ether, cyclohexane, selenium(IV) oxychloride
Insoluble in pyridine, quinoline, organic bases
Solubility in acetic acid 143.9 g/100 g (0 °C)
205.8 g/100 g (10 °C)
440.5 g/100 g (25 °C)[4]
693.7 g/100 g (45 °C)[3]
Solubility in acetone 537.6 g/100 g (18 °C)[3][4]
Solubility in benzoyl chloride 139.2 g/100 g (15 °C)
169.5 g/100 g (25 °C)[4]
2.76 kg/100 g (70 °C)[3]
Solubility in hydrochloric acid 20 °C:
8.954 g/ g (4.63% w/w)
8.576 g/ g (14.4% w/w)
7.898 g/ g (36.7% w/w)[3]
Solubility in p-Cymene 69.5 g/100 g (-3.5 °C)
85.5 g/100 g (10 °C)
150 g/100 g (30 °C)
2.17 kg/100 g (70 °C)[3]
Vapor pressure 13.33 Pa (18.1 °C)[4]
0.15 kPa (50 °C)
2.6 kPa (100 °C)[5]
1.46[1]
Structure
Orthorhombic
3.93 D (20 °C)[4]
Thermochemistry
183.3 J/mol·K[4]
110.5 J/mol·K[4]
-381.2 kJ/mol[4]
-322.5 kJ/mol[4]
Hazards
Safety data sheet ICSC 1224
GHS pictograms [2]
GHS signal word Danger
H314, H411[2]
P273, P280, P305+351+338, P310[2]
C N
R-phrases R34, R51/53
S-phrases (S1/2), S26, S45, S61
NFPA 704
Flammability code 0: Will not burn. E.g., water Health code 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g., chloroform Reactivity code 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g., calcium Special hazards (white): no codeNFPA 704 four-colored diamond
0
2
1
Flash point Non-flammable
Lethal dose or concentration (LD, LC):
525 mg/kg (oral, rat)
US health exposure limits (NIOSH):
PEL (Permissible)
TWA 0.5 mg/m3 (as Sb)[6]
REL (Recommended)
TWA 0.5 mg/m3 (as Sb)[6]
Related compounds
Other anions
Antimony trifluoride
Antimony tribromide
Antimony triiodide
Other cations
Nitrogen trichloride
Phosphorus trichloride
Arsenic trichloride
Bismuth chloride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Antimony trichloride is the chemical compound with the formula SbCl3. The soft colorless solid with a pungent odor was known to the alchemists as butter of antimony.

Preparation

Antimony trichloride is prepared by reaction of chlorine with antimony, antimony tribromide, antimony trioxide, or antimony trisulfide. It also may be made by treating antimony trioxide with concentrated hydrochloric acid.

Reactions

Antimony trichloride solution in hydrochloric acid

SbCl3 is readily hydrolysed and samples of SbCl3 must be protected from moisture. With a limited amount of water it forms antimony oxychloride releasing hydrogen chloride:

SbCl3 + H2O → SbOCl + 2 HCl

With more water it forms Sb4O5Cl2 which on heating to 460° under argon converts to Sb8O11Cll2.[7]

SbCl3 readily forms complexes with halides, but the stoichiometries are not a good guide to the composition,[7] for example the (C5H5NH)SbCl4 contains a chain anion with distorted SbIII octahedra. Similarly the salt (C4H9NH3)2SbCl5 contains a polymeric anion of composition [SbCl52−]n with distorted octahedral SbIII.[8]

With nitrogen donor ligands, L, complexes with a stereochemically active lone-pair are formed, for example Ψ-trigonal bipyramidal LSbCl3 and Ψ-octahedral L2SbCl3.[9]

SbCl3 is only a feeble Lewis base,[7] however some complexes are known for example the carbonyl complexes, Fe(CO)3(SbCl3)2 and Ni(CO)3SbCl3.[9]

Structure

In the gas phase SbCl3 is pyramidal with an Cl-Sb-Cl angle of 97.2° and a bond length of 233 pm.[10] In SbCl3 each Sb has three Cl atoms at 234 pm showing the persistence of the molecular SbCl3 unit, however there are a further five neighboring Cl atoms, two at 346 pm, one at 361 pm, and two at 374 pm. These eight atoms can be considered as forming a bicapped trigonal prism. These distances can be contrasted with BiCl3 which has three near neighbors at 250 pm, with two at 324 pm, and three at a mean of 336 pm. The point to note here is that the all eight close neighbours of Bi are closer than the eight closest neighbours of Sb, demonstrating the tendency for Bi to adopt higher coordination numbers.[10][7]

Uses

SbCl3 is a reagent for detecting vitamin A and related carotenoids in the Carr-Price test. The antimony trichloride reacts with the carotenoid to form a blue complex that can be measured by colorimetry.

Antimony trichloride has also been used as an adulterant to enhance the louche effect in absinthe. It has been used in the past to dissolve and remove horn stubs from calves without having to cut them off.

It is also used as a catalyst for polymerization, hydrocracking, and chlorination reactions; as a mordant; and in the production of other antimony salts. Its solution is used as an analytical reagent for chloral, aromatics, and vitamin A.[11]

Appearance in popular culture

In episode 12 of the third season of the popular British program All Creatures Great and Small, several calves died following an episode of nonspecific gastroenteritis, the cause of which was later determined to be ingestion of antimony trichloride present in a solution used to dissolve their horn stubs.

References

  1. 1 2 3 http://antimony.atomistry.com/antimony_trichloride.html
  2. 1 2 3 4 Sigma-Aldrich Co., Antimony(III) chloride. Retrieved on 2014-05-29.
  3. 1 2 3 4 5 6 Seidell, Atherton; Linke, William F. (1952). Solubilities of Inorganic and Organic Compounds. Van Nostrand.
  4. 1 2 3 4 5 6 7 8 9 http://chemister.ru/Database/properties-en.php?dbid=1&id=1978
  5. Antimony trichloride in Linstrom, P.J.; Mallard, W.G. (eds.) NIST Chemistry WebBook, NIST Standard Reference Database Number 69. National Institute of Standards and Technology, Gaithersburg MD. http://webbook.nist.gov (retrieved 2014-05-28)
  6. 1 2 "NIOSH Pocket Guide to Chemical Hazards #0036". National Institute for Occupational Safety and Health (NIOSH).
  7. 1 2 3 4 Greenwood, Norman N.; Earnshaw, Alan (1984). Chemistry of the Elements. Oxford: Pergamon Press. pp. 558–571. ISBN 0-08-022057-6.
  8. Zarychta, B.; Zaleski, J. "Phase transitions mechanism and distortion of SbCl63− octahedra in bis(n-butylammonium) pentachloroantimonate(III) (C4H9NH3)2[SbCl5]". Z. Naturforsch. B 2006, 61, 1101–1109. Abstract (PDF)
  9. 1 2 "Antimony: Inorganic Chemistry" R. Bruce King Encyclopedia of Inorganic Chemistry Editor R Bruce King (1994) John Wiley and Sons ISBN 0-471-93620-0
  10. 1 2 Wells A.F. (1984) Structural Inorganic Chemistry 5th edition, pp. 879 - 884, Oxford Science Publications, ISBN 0-19-855370-6
  11. Patnaik, P. Handbook of Inorganic Chemicals. McGraw-Hill, 2002, ISBN 0-07-049439-8.

External links

Wikimedia Commons has media related to Antimony trichloride.
This article is issued from Wikipedia - version of the 6/1/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.