Cessna CR-3

Cessna CR-3
Role Air racer
National origin United States of America
Manufacturer Cessna
Designer Clyde Cessna, Eldon Cessna
First flight June 11, 1933
Introduction June 17, 1933
Retired August 1933
Status Crashed
Number built 1
Developed from Cessna CR-2

The Cessna CR-3 was a follow on racing aircraft to the Cessna CR-2 that raced in the 1932 National Air Races.[1]

Development

The CR-3 was ordered by Air racer Johnny Livingston in response to the performance he saw when competing against the Cessna CR-2 in the 1932 National Air Races. The CR-2 was modified with a mid-wing design.

Design

The CR-3 was a mid-wing radial engined taildragger racer with manual retractable landing gear and a tail skid. The propeller was from a clipped wing Monocoupe racer #14. The tail surface was designed to be neutral, without downforce in flight. The elevators experienced significant vibration in test flights without the wing root fairings installed.

Operational history

The CR-3 lasted 61 days, winning every event it competed in.

En route to an airshow in August 1933, the CR-3 experienced a failure of both the tail skid and a landing gear weld that would not allow the gear to lock. Livingston bailed out over Columbus, Ohio and the CR-3 was destroyed.

Specifications

Data from Sport Aviation

General characteristics

Performance

See also

Related development


References

Wikimedia Commons has media related to Cessna CR-3.
  1. Sport Aviation. Feb 1958. Missing or empty |title= (help)
  2. "Cessna CR-3 History". Retrieved 16 April 2011.
  3. "Cessna CR-3". Retrieved 16 April 2011.
This article is issued from Wikipedia - version of the 5/27/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.