Derail

This article is about the device. As a verb, to "derail" means to suffer or cause a derailment.

Derail device installed at an industrial site, complete with blue flag protection

A derail or derailer is a device used to prevent fouling of a rail track (anything being present on the track: a person, a train, a branch, etc.) by unauthorized movements of trains or unattended rolling stock. As the name suggests, it works by derailing the equipment as it rolls over or through the device.

Overview

Although accidental derailment is damaging to equipment and track, and requires considerable time and expense to remedy, derails are used in situations where there is a risk of greater damage to equipment, injury or death if equipment is allowed to proceed past the derail point.

Applications

Derails may be applied:

where sidings meet main lines or other through tracks
at junctions or other crossings to protect the interlocking against unauthorized movement
temporarily at an area where crews are working on a rail line^[1]
approaching a drawbridge, dead end, or similar hazard.

Design

A derail device installed on a siding at Glen Haven, Wisconsin.

There are four basic forms of derail.

Wedge

The most common form is a wedge-shaped piece of steel which fits over the top of the rail. If a car or locomotive attempts to roll over it, the wheel flange is lifted over the rail to the outside, derailing it. When not in use, the derail folds away, leaving the rail unobstructed. It can be manually or remotely operated; in the former case it will have a lock applied to prevent it from being moved by unauthorized personnel. This type is common on North American railroads.

Derail on Nemuro Main Line, JR Hokkaido. It is set so that a train proceeding away from the camera will remain on the track.

Split rail

The second type of derail is the "split rail" type. These are basically a complete or partial railroad switch which directs the errant rolling stock away from the main line. This form is common throughout the UK, where it is called trap points or catch points.

A derail in Mannheim, Germany

Portable

The third type of derail is the portable derail, and is used by railroad mechanical forces, as well as some industries. This is often used in conjunction with Blue Flag rules and is temporary in nature. They are placed onto one side of the rail with the derail pointed to the outside of the track. Then there is a part of the derail that is able to be tightened down to the rail and then secured with a locking mechanism. If the derail is left unlocked for any reason or does not have a locking mechanism deployed then the owner of the derail can face substantial fines if found by an FRA inspector.

Powered

Powered derailer, Temple Mills, Eurostar Maintenance Depot, UK

The fourth type of derailer is the powered or motorized derailer, electronically powered through an actuator. This type is of derailer can be controlled remotely from an external control panel or manually. It is commonly installed as a part of Depot Personnel Protection Systems, to ensure personnel safety in maintenance workshops and depots.

Failures

Derails have failed on occasion, such as the Newark Bay rail accident of 1958, or on April 1, 1987, at Burnham, Illinois, when an unsecured car in a siding defeated a derail and fouled the mainline. Due to rusty rails, the car then failed to shunt the track circuit that should have put block signals to "stop".

References

↑ Meyer, J. Joe (March 9, 1978). "Portable derail". US Patent & Trademark Office. Retrieved September 25, 2006.

Railway infrastructure

Permanent way	Permanent way (history) Permanent way (current) Railroad tie/Sleeper Rail fastening system Track ballast Rail profile Fishplate Breather switch Datenail Axe ties Ladder track Baulk road Cant Minimum radius Track transition curve Clip and scotch

Trackwork and track structures	Junction Wye Railroad switch Gauntlet track Railway electrification system Third rail Overhead lines Guide bar Track gauge Track geometry Railway turntable Water crane Track pan Rail track Tramway track Classification yard Rail yard Siding Passing loop Balloon loop Headshunt Refuge siding Dual gauge Roll way

Signalling and safety	Derail Railway signalling Signalling control Wayside horn Railway signal Interlocking Level crossing Buffer stop Catch points Loading gauge Structure gauge Block post Train stop Signal bridge

Buildings	Railway station Station building Railway station layout Station clock Train shed Goods shed Motive power depot Roundhouse Railway platform

This article is issued from Wikipedia - version of the 10/13/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.