FS Class D.443

Class D.443

A tandem of D.443 locomotives at Rocchetta Sant'Antonio.
Type and origin
Power type Diesel
Builder FIAT Grandi Motori, Breda
Build date 1967-1970
Total produced 50
Specifications
AAR wheel arr. Bo-Bo
Gauge 1,435 mm (4 ft 8 12 in) standard gauge
Length 14.1 m (46 ft 3 18 in)
Loco weight 72.1 t (71.0 long tons; 79.5 short tons)
Fuel type Diesel
Transmission Electric
Performance figures
Maximum speed 130 km/h (81 mph)
Power output 1,350 hp (1,010 kW)
Career
Operators FS/Trenitalia and others

The FS Class D.443 is a class of diesel-electric locomotive used in Italy, introduced in the late 1960s and still in service.

History

D.443 was ordered by the Italian state railways, Ferrovie dello Stato (FS), at the same time than the D.343, but requiring generally higher performances and multi-role capabilities. The two types shared the same hull and the single-motored bogies, which had been designed by FS. 30 units were to be built by FIAT, the remaining 20 by Breda. The D.443 were mainly to replace the old steam locomotives which were used for heavy freight trains on light, not-electrified lines.

Description

D.443 has one cab at each end, separated by two compartments including the engine-transmission pack and, in the other, the cooling devices. The two engine were both V-12, 12 piston, with 1,900 hp (1,400 kW) of power, coupled to a DC 640/1080 V generator provided by Ansaldo. The two electric motors, designed by Breda, had a continuous power output of 622 kW (834 hp).

References

    Sources

    This article is issued from Wikipedia - version of the 9/6/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.