Furfuryl alcohol
Names | |
---|---|
IUPAC name
2-furanmethanol | |
Other names
2-furancarbinol | |
Identifiers | |
98-00-0 | |
3D model (Jmol) | Interactive image |
ChEBI | CHEBI:207496 |
ChEMBL | ChEMBL308187 |
ChemSpider | 7083 |
ECHA InfoCard | 100.002.388 |
PubChem | 7361 |
UNII | D582054MUH |
| |
| |
Properties | |
C5H6O2 | |
Molar mass | 98.10 g/mol |
Appearance | colorless to amber liquid[2] |
Odor | burning odor[2] |
Density | 1.128 g/cm3 |
Melting point | −29 °C (−20 °F; 244 K) |
Boiling point | 170 °C (338 °F; 443 K) |
miscible | |
Hazards | |
Safety data sheet | External MSDS |
NFPA 704 | |
Flash point | 65 °C; 149 °F; 338 K [2] |
Explosive limits | 1.8% - 16.3%[2] |
Lethal dose or concentration (LD, LC): | |
LC50 (median concentration) |
397 ppm (mouse, 6 hr) 85 ppm (rat, 6 hr) 592 ppm (rat, 1 hr)[3] |
LCLo (lowest published) |
597 ppm (mouse, 6 hr)[3] |
US health exposure limits (NIOSH): | |
PEL (Permissible) |
TWA 50 ppm (200 mg/m3)[2] |
REL (Recommended) |
TWA 10 ppm (40 mg/m3) ST 15 ppm (60 mg/m3) [skin][2] |
IDLH (Immediate danger) |
75 ppm[2] |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
verify (what is ?) | |
Infobox references | |
Furfuryl alcohol, also called 2-furylmethanol or 2-furancarbinol, is an organic compound containing a furan substituted with a hydroxymethyl group. It is a clear colorless liquid when pure, but becomes amber colored upon prolonged standing. It possesses a faint burning odor and a bitter taste. It is miscible with but unstable in water. It is soluble in common organic solvents. Upon treatment with acids, heat and/or catalysts, furfuryl alcohol can be made to polymerize into a resin, poly(furfuryl alcohol).
Furfuryl alcohol is manufactured industrially by the catalytic reduction of furfural which is obtained from corncob and sugar cane bagasse. It finds use as a solvent, but is primarily used as an ingredient in the manufacture of various chemical products such as foundry resins, adhesives, and wetting agents.
Furfuryl alcohol has been used in rocketry as a fuel which ignites hypergolically (immediately and energetically in contact) with white fuming nitric acid or red fuming nitric acid oxidizer.[4] The use of hypergolics avoids the need for an igniter. In late 2012, Spectra, a concept liquid rocket engine using white fuming nitric acid as the oxidizer to furfuryl alcohol fuel was static tested by Copenhagen Suborbitals.[5][6]
Because of its low molecular weight, furfuryl alcohol can impregnate the cells of wood, where it can be polymerized and bonded with the wood by heat, radiation, and/or catalysts or additional reactants. The treated wood has improved moisture-dimensional stability, hardness, and decay and insect resistance; catalysts can include zinc chloride, citric or formic acid, or borates.[7][8]
References
- ↑ Merck Index, 11th Edition, 4215.
- 1 2 3 4 5 6 7 "NIOSH Pocket Guide to Chemical Hazards #0298". National Institute for Occupational Safety and Health (NIOSH).
- 1 2 "Furfuryl alcohol". Immediately Dangerous to Life and Health. National Institute for Occupational Safety and Health (NIOSH).
- ↑ Ignition Catalysts for Furfuryl Alcohol—Red Fuming Nitric Acid Bipropellant AIAA Journal Vol 8, No. 5 Pg 988.
- ↑ Madsen, Peter. "Spectra-testen". Retrieved September 10, 2012.
- ↑ http://copenhagensuborbitals.com/public/spectra.pdf The Spectra engine test report pdf
- ↑ Stamm, Alfred (June 1, 1977). "Dimensional Stabilization of Wood with Furfuryl Alcohol Resin". Wood Technology: Chemical Aspects. AMERICAN CHEMICAL SOCIETY. pp. 141–149.
- ↑ Ergun Baysal et al. (21 Aug 2004). "Dimensional stabilization of wood treated with furfuryl alcohol catalysed by borates". Wood Science & Technology. 38 (6).
External links
- Health hazards
- CDC - NIOSH Pocket Guide to Chemical Hazards
- Literature: K.J. Zeitsch,The Chemistry and Technology of Furfural and its Many By-Products, Elsevier, 2000