HPSDR

Amateur radio transceiver with HPSDR components
Receiver with spectrum in 160-meter band

The OpenHPSDR (High Performance Software Defined Radio) project dates from 2005 when Phil Covington, Phil Harman, and Bill Tracey combined their separate projects to form the HPSDR group.[1] It is built around a modular concept which encourages experimentation with new techniques and devices (e.g. SDR, Envelope Elimination and Restoration) without the need to replace the entire set of boards. The project has expanded from the original group, and several additional people have been involved in recent HPSDR module designs.

The core modules of the project are the Atlas passive backplane, the Ozy interface which provides a USB 2.0 data channel between the HPSDR system and the host PC, and the Mercury and Penelope receiver and exciter boards, which use high speed ADCs and DACs for direct conversion of received or transmitted signals in the DC to 55 MHz frequency range.

Mercury has attracted wide interest within the HPSDR community as a general-coverage, high performance, HF receiver. It uses a 16-bit 135MSPS analog-to-digital converter that provides performance over the range 0 to 55 MHz comparable to that of a conventional analog HF radio. The receiver will also operate in the VHF and UHF range using either mixer image or alias responses. The host computer uses DSP techniques to process the digital bitstream it receives from the HPSDR system.[2] Currently, the HPSDR hardware has been interfaced with the Flex-Radio PowerSDR Windows-based software, which is licensed under the GPL.[3]

As of February, 2011,[4] the following HPSDR modules have been released:

Other modules nearing release include:

Replaced by newer modules:

In cooperation with the HPSDR group, TAPR has provided (or will provide) all the modules listed above. Most have been made available as either fully assembled units or as bare circuit boards; a few are available as kits of parts.

Several other modules are under development. A web site and Wiki provide further information about the HPSDR projects. .[5]

The HPSDR project is open-source for software and uses a combination of licenses for the hardware.[6]

See also

References

  1. ↑ Covington, Philip. "History of HPSDR Mercury and Quick Silver". Archived from the original on 2009-04-01.
  2. ↑ Ireland, Steve; Phil Harman (December 2008). "Software Defined Radio, Looking into state-of-the-art SDR hardware". RadCom. 84 (12): 48–49. Retrieved 2009-04-03.
  3. ↑ Flex-Radio Systems. "Flexradio PowerSDR 1.X Features and Capabilities".
  4. ↑ https://www.tapr.org/kits_pandora.html
  5. ↑ "HPSDR Web Site".
  6. ↑ "HPSDR Web Support page".
This article is issued from Wikipedia - version of the 6/26/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.