JEIDA memory card
The JEIDA memory card standard was a popular memory card standard at the beginning of memory cards appearing on portable computers. JEIDA cards could be used to expand system memory or as a solid-state storage drive. Before the advent of the JEIDA standard, laptops had proprietary cards that were not interoperable with other manufacturers laptops, other laptop lines, or even other models in the same line.
The establishment of the JEIDA interface and cards across Japanese portables provoked a response from the US government, through SEMATECH, and thus PCMCIA was born. PCMCIA and JEIDA worked to solve this rift between the two competing standards, and merged into JEIDA 4.1 or PCMCIA 2.0 in 1991.
Versions
- Version 1.0 is an 88-pin memory card. It has 2 rows of pin holes which are shifted against each other by half the pin spacing. The card is 3.3mm thick.
- Version 2.0 is only mechanically compatible with the Version 1.0 card. Version 1.0 cards fail in devices designed for Version 2.0.
- Version 3 is a 68-pin memory card. It is also used in the Neo Geo.
- Version 4.0 corresponds with 68-pin PCMCIA 1.0 (1990).
- Version 4.1 unified the PCMCIA and JEIDA standards as PCMCIA 2.0. v4.1 is the 16-bit PC Card standard that defines Type I, II, III, and IV card sizes.
- Version 4.2 is the PCMCIA 2.1 standard, and introduced CardBus' 32-bit interface in an almost physically identical casing.
See also
- Japan Electronic Industries Development Association
- Japan Electronics and Information Technology Industries Association
- Personal Computer Memory Card International Association
- Compact Flash
| Main articles |
| .svg.png) |
|---|---|---|
| Types |
| |
This article is issued from Wikipedia - version of the 3/9/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.