Job evaluation
A job evaluation is a systematic way of determining the value/worth of a job in relation to other jobs in an organization. It tries to make a systematic comparison between jobs to assess their relative worth for the purpose of establishing a rational pay structure.
Job evaluation needs to be differentiated from job analysis. Job analysis is a systematic way of gathering information about a job. Every job evaluation method requires at least some basic job analysis in order to provide factual information about the jobs concerned. Thus, job evaluation begins with job analysis and ends at that point where the worth of a job is ascertained for achieving pay equity between jobs.
Process
The process of job evaluation involves the following steps:
- Gaining acceptance: Before undertaking job evaluation, top management must explain the aims and uses of the programme to the employees and unions. To elaborate the program further, oral presentations could be made. Letters, booklets could be used to classify all relevant aspects of the job evaluation programme.
- Creating job evaluation committee: It is not possible for a single person to evaluate all the key jobs in an organization. Usually a job evaluation committee consisting of experienced employees, union representatives and HR experts is created to set the ball rolling.
- Finding the jobs to be evaluated: Every job need not be evaluated. This may be too taxing and costly. Certain key jobs in each department may be identified. While picking up the jobs, care must be taken to ensure that they represent the type of work performed in that department.
- Analysing and preparing job description: This requires the preparation of a job description and also an analysis of job needs for successful performance .
- Selecting the method of evaluation: The most important method of evaluating the jobs must be identified now, keeping the job factors as well as organisational demands in mind.
- Classifying jobs: The relative worth of various jobs in an organisation may be found out after arranging jobs in order of importance using criteria such as skill requirements, experience needed, under which conditions job is performed, type of responsibilities to be shouldered, degree of supervision needed, the amount of stress caused by the job, etc. Weights can be assigned to each such factor. When we finally add all the weights, the worth of a job is determined. The points may then be converted into monetary values.
Installing the programme
Once the evaluation process is over and a plan of action is ready, management must explain it to employees and put it into operation.
Reviewing periodically
In the light of changes in environmental conditions (technology, products, services, etc.) jobs need to be examined closely. For example, the traditional clerical functions have undergone a rapid change in sectors like banking, insurance and railways, after computerisation. New job descriptions need to be written and the skill needs of new jobs need to be duly incorporated in the evaluation process. Otherwise, employees may feel that all the relevant job factors - based on which their pay has been determined - have not been evaluated properly.
For job evaluation to be practicable it is necessary:
- that jobs can be easily identified
- that there are sufficient differences between different jobs; and
- that agreements know the relative importance or worth of different jobs can be negotiated between the enterprise and its employees and/or their representatives.
Methods
There are primarily three methods of job evaluation: (1) ranking, (2) classification, (3) Factor comparison method or Point method. While many variations of these methods exist in practice, the three basic approaches are described here.
Ranking method
Perhaps the simplest method of job evaluation is the ranking method. According to this method, jobs are arranged from highest to lowest, in order of their value or merit to the organization. Jobs can also be arranged according to the relative difficulty in performing them. The jobs are examined as a whole rather than on the basis of important factors in the job; the job at the top of the list has the highest value and obviously the job at the bottom of the list will have the lowest value. Jobs are usually ranked in each department and then the department rankings are combined to develop an organizational ranking. The variation in payment of salaries depends on the variation of the nature of the job performed by the employees. The ranking method is simple to understand and practice and it is best suited for a small organization. Its simplicity however works to its disadvantage in big organizations because rankings are difficult to develop in a large, complex organization. Moreover, this kind of ranking is highly subjective in nature and may offend many employees. Therefore, a more scientific and fruitful way of job evaluation is called for.
Classification method (Grading method)
According to this method, a predetermined number of job groups or job classes are established and jobs are assigned to these classifications. This method places groups of jobs into job classes or job grades. Separate classes may include office, clerical, managerial, personnel, etc. Following is a brief description of such a classification in an office.
- Class I - Executives: Further classification under this category may be Office Manager, Deputy office manager, Office superintendent, Departmental supervisor, etc.
- Class II - Skilled workers: Under this category may come the Purchasing assistant, Cashier, Receipts clerk, etc.
- Class III - Semiskilled workers: Under this category may come Stenotypists, Machine-operators, Switchboard operator etc.
- Class IV - Unskilled workers: This category may comprise peons, messengers, housekeeping staff, Daftaris, File clerks, Office boys, etc.
The job grading method is less subjective when compared to the earlier ranking method. The system is very easy to understand and acceptable to almost all employees without hesitation. One strong point in favour of the method is that it takes into account all the factors that a job comprises. This system can be effectively used for a variety of jobs. The weaknesses of the Grading method are:
- Even when the requirements of different jobs differ, they may be combined into a single category, depending on the status a job carries.
- It is difficult to write all-inclusive descriptions of a grade.
- The method oversimplifies sharp differences between different jobs and different grades.
- When individual job descriptions and grade descriptions do not match well, the evaluators have the tendency to classify the job using their subjective judgements.
Factor comparison method or Point method
This method is widely used and is considered to be one of the reliable and systematic approach for job evaluation in mid and large size organisations. Most consulting firms adopt this method, which was pioneered by Edward Hay in 1943. Here, jobs are expressed in terms of key factors. Points are assigned to each factor after prioritizing each factor in order of importance. The points are summed up to determine the wage rate for the job. Jobs with similar point totals are placed in similar pay grades. The procedure involved may be explained thus:
1. Select key jobs. Identify the factors common to all the identified jobs such as skill, effort, responsibility, etc.
2. Divide each major factor into a number of sub factors. Each sub factor is defined and expressed clearly in the order of importance, preferably along a scale.
The most frequent factors employed in point systems are (i) Skill (key factor); Education and training required, Breadth/depth of experience required, Social skills required, Problem-solving skills, Degree of discretion/use of judgment, Creative thinking (ii) Responsibility/Accountability: Breadth of responsibility, Specialized responsibility, Complexity of the work, Degree of freedom to act, Number and nature of subordinate staff, Extent of accountability for equipment/plant, Extent of accountability for product/materials; (iii) Effort: Mental demands of a job, Physical demands of a job, Degree of potential stress
The educational requirements (sub factor) under the skill (key factor) may be expressed thus in the order of importance.
3. Find the maximum number of points assigned to each job (after adding up the point values of all sub-factors of such a job).
This would help in finding the relative worth of a job. For instance, the maximum points assigned to an officer's job in a bank come to 540. The manager's job, after adding up key factors + sub factors points, may be getting a point value of say 650 from the job evaluation committee. This job is now priced at a higher level.
4. Once the worth of a job in terms of total points is expressed, the points are converted into money values keeping in view the hourly/daily wage rates. A wage survey is usually undertaken to collect wage rates of certain key jobs in the organization.
Market Pricing
Market pricing is the process for determining the external value of jobs, allowing you to establish wage and salary structures and pay rates that are market sensitive. Job matching session is conducted.
Merits and demerits
The point method is a superior and widely used method of evaluating jobs. It forces raters to look into all key factors and sub-factors of a job. Point values are assigned to all factors in a systematic way, eliminating bias at every stage. It is reliable because raters using similar criteria would get more or less similar answers. The methodology underlying the approach contributes to a minimum of rating error (Robbins p. 361). It accounts for differences in wage rates for various jobs on the strength of job factors. Jobs may change over time, but the rating scales established under the point method remain unaffected. On the negative side, the point method is complex. Preparing a manual for various jobs, fixing values for key and sub-factors, establishing wage rates for different grades, etc., is a time consuming process, According to Decenzo and Robbins, "the key criteria must be carefully and clearly identified, degrees of factors have to be agreed upon in terms that mean the same to all rates, the weight of each criterion has to be established and point values must be assigned to degrees". This may be too taxing, especially while evaluating managerial jobs where the nature of work (varied, complex, novel) is such that it cannot be expressed in quantifiable numbers.
Vendors
The following table lists several vendors of analytical job evaluation systems. The list is not conclusive.
Vendor | Grading Criteria | Career Paths |
---|---|---|
ECC Ltd - HERA and FEDRA for universities and colleges | 14 elements used for evaluating each role, including Communication, Liaison and Networking, Decision Making, Planning and Organising, Teaching and Learning Support.
Source [1] |
career paths determined by organisation using the system |
gradar the job evaluation engine | common factors for all career paths
common factors for individual contributor and management
specific for individual contributor
specific for people management
specific for project management
Source [2] |
|
Hay Group - Guide Charts Profile Method of Job Evaluation | Know-how
Problem solving
Accountability
Source [3] |
no differentiation of career paths |
Mercer - International Position Evaluation | Impact
Communication
Innovation
Knowledge
Working Conditions (only to be used when high risks present)
Source [4] |
no differentiation of career paths |
pwc - STRATA | Know-How
Problem solving
Accountability and Impact
Source [5] |
no differentiation of career paths |
Towers Watson - Global Grading System |
|
Individual Contributor
Management
|
Limitations
- Job evaluation is not completely scientific.
- Most of the techniques are difficult to understand, even for the supervisors.
- The factors taken by the programme are not exhaustive.
- There may be wide fluctuations in compensable factors in view of changes in technology, values and aspirations of employers, etc.
- Employees, trade union leaders, management and the programme operators may assign different weight to different factors, thus creating grounds for dispute.
Concept of job design
What is job design? As we just explained, job analysis provides job-related data as well as the skills and knowledge required for the incumbent to perform the job. A better job performance also requires deciding on sequence of job contents. This is called 'job design'. Job design is a logical sequence to job analysis. In other words, job design involves specifying the contents of a job, the work methods used in its performance and how the job relates to other jobs in the organisation.
A few definitions on job design are produced here with a view to help you understand the meaning of job design in a better manner. Michael Armstrong11 has defined job design as "the process of deciding on the contents of a job in terms of its duties and responsibilities, on the methods to be used in carrying out the job, in terms of techniques, systems and procedures, and on the relationships that should exist between the job holder and his superiors, subordinates and colleagues".
Mathis and Jackson I2 have defined job design as "a process that integrates work content (tasks, functions, relationships), the rewards(extrinsic and intrinsic), and the qualifications required (skills, knowledge, abilities) for each job in a way that meets the needs of employees and organisations."
Popplewell and Wildsmith13 define job design in these words: "......involves conscious efforts to organise tasks, duties, and responsibilities into a unit of work to achieve certain objectives".
Having gone through the above definitions of job design, it can now be described as a deliberate attempt made to structure both technical and social aspects of the job to attain a fit between the individual (job holder) and the job. The very idea is that job should be designed in such a way as to enable employees to control over the aspects of their work. The underlying justification being that by doing this, it enhances the quality of the work life, harnesses the potential of the workers in a more effective manner and thereby improves employee performance.
Techniques for designing jobs
Basically, there are four techniques used in the design of jobs. These include Job simplification, Job enlargement, Job enrichment and Job rotation.
Job simplification
Job simplification is a design method whereby jobs are divided into smaller components and subsequently assigned to workers as whole jobs. Simplification of work requires that jobs be broken down into their smallest units and then analysed. Each resulting sub-unit typically consists of relatively few operations. These subunits are then assigned to the workers as their total job. Many fast food restaurants such as McDonald's, Burger King and KFC use simplification because employees can learn tasks rapidly; short work cycles allow task performance with little or no mental effort and low-skilled and low-paid employees can be hired and trained easily.
On the negative side, job simplification results in workers experiencing boredom, frustration, alienation, lack of motivation and low job satisfaction. This, in turn, leads to lower productivity and increased cost.
Job enlargement
Job enlargement expands a job horizontally. It increases job scope; that is, it increases the number of different operations required in a job and the frequency with which the job cycle is repeated. By increasing the number of tasks an individual performs, job enlargement increases the job scope, or job diversity. Instead of only sorting the incoming mail by department, for instance, a mail sorter's job could be enlarged to include physically delivering the mail to the various departments or running outgoing letters through the postage meter.
Efforts at job enlargement have met with less than enthusiastic results. As one employee who experienced such a redesign on his job remarked, "Before I had one lousy job. Now, through enlargement, I have three!" So while job enlargement attacks the lack of diversity in overspecialised jobs, it has done little to provide challenge or meaningfulness to a worker's activities.
Job rotation
Job rotation refers to the movement of an employee from one job to another. Jobs themselves are not actually changed, only the employees are rotated among various jobs. An employee who works on a routine job moves to work on another job for some hours/days/months and returns to the first job. This measure relieves the employee from the boredom and monotony, improves the employee's skills regarding various jobs and prepares worker's self-image and provides personal growth. However, frequent job rotations are not advisable in view of their negative impact on the organisation and the employee.
Job enrichment
Job enrichment, as currently practiced in industry, is a direct outgrowth of Herzberg's Two Factor Theory of motivation. It is, therefore, based on the assumption that in order to motivate personnel, the job itself must provide opportunities for achievement recognition, responsibility, advancement and growth. The basic idea is to restore to jobs the elements of interest that were taken away under intensive specialisation. Job enrichment tries to embellish the job with factors that Herzberg characterised as motivators: achievement, recognition, increased responsibilities, opportunities for growth, advancement and increased competence. There is an attempt to build into jobs a higher sense of challenge and achievement, through vertical job loading. 6 Job enrichment has four unique aspects:
- It changes the basic relationship between employees and their work. Interesting and challenging work, as studies have proved, can be a source of employee satisfaction.
- It changes employee behaviours in ways that gradually lead to more positive attitudes about the organisation and a better self-image. Feeling of autonomy and personal freedom help employees view their jobs in a favourable way.
- It helps the employer to bring about organisational changes easily, securing employee cooperation and commitment.
- Job enrichment can humanise an organisation. 'Individuals can experience the psychological that comes from developing new competencies and doing a job well. Individuals are encouraged to grow and push themselves.'
Many companies in India realised the importance of offering jobs having depth, variety and meaningfulnessl to their employees long back. ICICI, Procter & Gamble, Infosys, Bharat Petroleum, Asian Paints, HLL and Hughes Software have certain things in common: greater opportunities to grow vertically, open communication, flexible working hours, excellent reward schemes, employee-oriented work environment, sharing with and learning from others etc. The BT-Hewlett Associates study has clearly indicated the benefits of having such excellent practices.
- Employees in the above companies displayed tremendous pride in what their company does and in its products and services. They also believed in its future prospects.
- Employees in the above companies admired their leadership for making them fell 'safe and well-led'.
A job evaluation is a systematic way of determining the value/worth of a job in relation to other jobs in an organisation. It tries to make a systematic comparison between jobs to assess their relative worth for the purpose of establishing a rational pay structure.
Job evaluation needs to be differentiated from job analysis. Job analysis is a systematic way of gathering information about a job. Every job evaluation method requires at least some basic job analysis in order to provide factual information about the jobs concerned. Thus, job evaluation begins with job analysis and ends at that point where the worth of a job is ascertained for achieving pay equity between jobs.
References
- ↑ "About HERA and FEDRA".
- ↑ "job grading factors". www.gradar.com. Retrieved 2015-12-26.
- ↑ "Brochure Hay Guide Chart" (PDF). Retrieved 2015-12-26.
- ↑ "International Position Evaluation System (IPE)". www.imercer.com. Retrieved 2015-12-26.
- ↑ "Flyer Competency Management & Job Evaluation" (PDF). Retrieved 2015-12-26.