Living hinge

A living hinge on the lid of a Tic Tac box.

A living hinge is a thin flexible hinge (flexure bearing) made from the same material as the two rigid pieces it connects, rather than cloth, leather, or some other flexible substance. It is typically thinned or cut to allow the rigid pieces to bend along the line of the hinge. The minimal friction and very little wear in such a hinge makes it useful in the design of microelectromechanical systems, and the low cost and ease of manufacturing makes them quite common in disposable packaging.[1]

Plastic

Plastic living hinges are typically manufactured in an injection molding operation that creates all three parts at one time as a single piece, and if correctly designed and constructed, it can remain functional over the life of the part. Polyethylene and polypropylene are considered to be the best resins for living hinges, due to their excellent fatigue resistance.[2][3]

Wood

A laser cut plywood box with two living hinges

A variant on the kerf bend can be used to create living hinges in laser cut wood. The technique is popular for making light-duty hinges with large radii.[4]

References

  1. ↑ "Engineering Fundamentals: Living Hinge".
  2. ↑ Proto Labs 2014-12 Design Tips
  3. ↑ Dominic Muren (2005-08-15). "Hinges, both living and dead".
  4. ↑ Sean Michael Ragan (2011-10-25). "Plywood Living Hinge Design for Laser Cutters".
Wikimedia Commons has media related to Living hinges.
This article is issued from Wikipedia - version of the 8/24/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.