Low level injection

Low level injection conditions for a P-N junction refers to the state where the number of minority carriers generated are small compared to the majority carriers of the material. Essentially, the semiconductor's majority carrier concentration will remain (relatively) unchanged, while the minority carrier concentration sees a large increase. In this condition minority carrier recombination rates are linear.^[1]

The following equation must be satisfied for a semiconductor under carrier injection conditions, where $n$ is the number of electrons, $\Delta n$ is the excess carriers injected into the semiconductor and $n_{0}$ is the equilibrium concentration of electrons in the semiconductor:

${\displaystyle n=\Delta n+n_{0}}$

The following relation must also be true, because for every electron injected a hole must also be created to keep a balance of charge:

${\displaystyle \Delta n=\Delta p}$

The assumption of low level injection can be made regarding an n-type semiconductor, which affects the equations in the following way:

${\displaystyle \Delta n\ll N_{D}}$

Therefore ${\displaystyle n=N_{D}}$ and ${\displaystyle p=\Delta p+p_{0}}$.

In comparison a semiconductor in high injection means that the number of generated carriers is large compared to the background doping density of the material. In this condition minority carrier recombination rates are proportional to the number of carriers squared^[2]

References

1. Jenny Nelson, The Physics of Solar Cells, Imperial College Press, UK, 2007 pp. 266-267
2. R. R. King, R. A. Sinton, and R. M. Swanson, Doped Surfaces in one sun, point-contact solar cells, Appl. Phys. Lett. 54 (15), 1989 pp. 1460-1462