Microsequencer
In computer architecture and engineering, a sequencer or microsequencer generates the addresses used to step through the microprogram of a control store. It is used as a part of the control unit of a CPU or as a stand-alone generator for address ranges.
Usually the addresses are generated by some combination of a counter, a field from a microinstruction, and some subset of the instruction register. A counter is used for the typical case, that the next microinstruction is the one to execute. A field from the microinstruction is used for jumps, or other logic.
Since CPUs implement an instruction set, it's very useful to be able to decode the instruction's bits directly into the sequencer, to select a set of microinstructions to perform a CPU's instructions.
Most modern CISC processors use a combination of pipelined logic to process lower complexity opcodes which can be completed in one clock cycle, and microcode to implement ones that take multiple clock cycles to complete.
One of the first integrated microcoded processors was the IBM PALM Processor which emulated all of the processor's instruction in microcode and was used on the IBM 5100, one of the very first personal computers.
Recent examples of similar microsequencer-based processors are the MicroCore Labs MCL86 and MCL51 cores which emulate the Intel 8086/8088 and 8051 instruction sets totally in microcode.