NOTAR

MD Explorer (German police)

NOTAR (no tail rotor) is the name of a helicopter system which avoids the use of a tail rotor. It was developed by McDonnell Douglas Helicopter Systems (through their acquisition of Hughes Helicopters). The system uses a fan inside the tailboom to build a high volume of low-pressure air, which exits through two slots and creates a boundary layer flow of air along the tailboom utilizing the Coandă effect. The boundary layer changes the direction of airflow around the tailboom, creating thrust opposite the motion imparted to the fuselage by the torque effect of the main rotor. Directional yaw control is gained through a vented, rotating drum at the end of the tailboom, called the direct jet thruster. Advocates of NOTAR believe the system offers quieter and safer operation.[1]

Development

The Cierva W.9 showing the long tailboom from which the efflux from the engine-driven fan emerged from a directable vent on the left side at the tip of the tailboom

The use of directed air to provide anti-torque control had been tested as early as 1945 in the British Cierva W.9. During 1957, a Spanish prototype designed and built by Aerotecnica flew using exhaust gases from the turbine instead of a tail rotor. This model was designated as Aerotecnica AC-14. Development of the NOTAR system dates back to 1975, when engineers at Hughes Helicopters began concept development work.[2] In December 1981, Hughes flew an OH-6A fitted with NOTAR for the first time. The OH-6A helicopter (serial number 65-12917) was supplied by the U.S. Army for Hughes to develop the NOTAR technology and was the second OH-6 built by Hughes for the U.S. Army. A more heavily modified version of the prototype demonstrator first flew in March 1986 (by which time McDonnell Douglas had acquired Hughes Helicopters). The original prototype last flew in June 1986 and is now at the U.S. Army Aviation Museum in Fort Rucker, Alabama. Soviet manufacturer Kamov made a prototype on their co-axial helicopter Ka-26, which they called Ka-26SS, in 1988. It never went into production.

A production model NOTAR 520N (N520NT) was later produced and first flew on May 1, 1990. It later crashed on September 27, 1994 when it collided with an AH-64D while flying as a chase aircraft for the Apache.

Concept

Although the concept took over three years to refine, the NOTAR system is simple in theory and works to provide some directional control using the Coandă effect.[2][3] A variable pitch fan is enclosed in the aft fuselage section immediately forward of the tail boom and driven by the main rotor transmission. This fan forces low pressure air through two slots on the right side of the tailboom,[Notes 1] causing the downwash from the main rotor to hug the tailboom, producing lift, and thus a measure of directional control. This is augmented by a direct jet thruster and vertical stabilisers.

Benefits of the NOTAR system include increased safety (the tail rotor being vulnerable), and greatly reduced external noise as tail rotors on helicopters produce a lot of noise. NOTAR-equipped helicopters are among the quietest certified helicopters.

Applications

MD Helicopters 520N NOTAR

There are three production helicopters that utilize the NOTAR system, all produced by MD Helicopters:

See also

Notes

  1. NOTAR is an American designed system and so this is true for American-made helicopters whose main rotors rotate couterclockwise (viewed from above). Many helicopters made elsewhere, such as France and Russia, have clockwise rotating main rotors and with the opposite resultant torque would require the slots to be on the left.

References

  1. kulikovair.com
  2. 1 2 Frawley, Gerard: The International Directory of Civil Aircraft, 2003–2004, page 155. Aerospace Publications Pty Ltd, 2003. ISBN 1-875671-58-7
  3. NOTAR Technology
Wikimedia Commons has media related to NOTAR.
This article is issued from Wikipedia - version of the 11/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.