Pegas Discus

Pegas Discus
Role	Paraglider
National origin	Czech Republic
Manufacturer	Pegas 2000
Status	Production completed
Unit cost	€2,300 (Discus 2 40, 2004)

The Pegas Discus is a Czech two-place paraglider that was designed and produced by Pegas 2000 of Prague. It is now out of production.^[1]

Design and development

The aircraft was designed as a tandem glider for flight training and as such was referred to as the Discus Bi, indicating "bi-place" or two seater.^[1]

The design progressed through two generations of models, the Discus 1 and 2, each improving on the last. The models are each named for their approximate wing area in square metres.^[1]

Variants

Discus 2 40 Bi

Small-sized model for lighter pilots. Its 13.7 m (44.9 ft) span wing has a wing area of 39.7 m² (427 sq ft), 46 cells and the aspect ratio is 4.7:1. The pilot weight range is 130 to 180 kg (287 to 397 lb).^[1]>

Discus 2 45 Bi

Large-sized model for heavier pilots. Its 15.0 m (49.2 ft) span wing has a wing area of 44.5 m² (479 sq ft), 50 cells and the aspect ratio is 5.1:1. The pilot weight range is 150 to 220 kg (331 to 485 lb).^[1]

Specifications (Discus 2 40)

Data from Bertrand^[1]

General characteristics

• Crew: one
• Wingspan: 13.7 m (44 ft 11 in)
• Wing area: 39.7 m² (427 sq ft)
• Aspect ratio: 4.7:1
• Maximum speed: 42 km/h (26 mph; 23 kn)
• Rate of sink: 1.1 m/s (220 ft/min)

References

1. Bertrand, Noel; Rene Coulon; et al: World Directory of Leisure Aviation 2003-04, page 27. Pagefast Ltd, Lancaster OK, 2003. ISSN 1368-485X