S/MIME

OSI model by layer
7. Application layer NNTP SIP SSI DNS FTP Gopher HTTP NFS NTP SMPP SMTP SNMP Telnet DHCP Netconf more....
6. Presentation layer MIME XDR
5. Session layer Named pipe NetBIOS SAP PPTP RTP SOCKS SPDY
4. Transport layer TCP UDP SCTP DCCP SPX
3. Network layer IP IPv4 IPv6 ICMP IPsec IGMP IPX AppleTalk X.25 PLP
2. Data link layer ATM ARP IS-IS SDLC HDLC CSLIP SLIP GFP PLIP IEEE 802.2 LLC MAC L2TP IEEE 802.3 Frame Relay ITU-T G.hn DLL PPP X.25 LAPB Q.921 LAPD Q.922 LAPF
1. Physical layer EIA/TIA-232 EIA/TIA-449 ITU-T V-Series I.430 I.431 PDH SONET/SDH PON OTN DSL IEEE 802.3 IEEE 802.11 IEEE 802.15 IEEE 802.16 IEEE 1394 ITU-T G.hn PHY USB Bluetooth RS-232 RS-449

S/MIME (Secure/Multipurpose Internet Mail Extensions) is a standard for public key encryption and signing of MIME data. S/MIME is on an IETF standards track and defined in a number of documents, most importantly RFCs 3369, 3370, 3850 and 3851. It was originally developed by RSA Data Security Inc. and the original specification used the IETF MIME specification^[1] with the de facto industry standard PKCS#7 secure message format. Change control to S/MIME has since been vested in the IETF and the specification is now layered on Cryptographic Message Syntax, an IETF specification that is identical in most respects with PKCS #7. S/MIME functionality is built into the majority of modern email software and interoperates between them.

Function

S/MIME provides the following cryptographic security services for electronic messaging applications:

Authentication
Message integrity
Non-repudiation of origin (using digital signatures)
Privacy
Data security (using encryption)

S/MIME specifies the MIME type application/pkcs7-mime (smime-type "enveloped-data") for data enveloping (encrypting) where the whole (prepared) MIME entity to be enveloped is encrypted and packed into an object which subsequently is inserted into an application/pkcs7-mime MIME entity.

S/MIME certificates

Before S/MIME can be used in any of the above applications, one must obtain and install an individual key/certificate either from one's in-house certificate authority (CA) or from a public CA. The accepted best practice is to use separate private keys (and associated certificates) for signature and for encryption, as this permits escrow of the encryption key without compromise to the non-repudiation property of the signature key. Encryption requires having the destination party's certificate on store (which is typically automatic upon receiving a message from the party with a valid signing certificate). While it is technically possible to send a message encrypted (using the destination party certificate) without having one's own certificate to digitally sign, in practice, the S/MIME clients will require you to install your own certificate before they allow encrypting to others.

A typical basic ("class 1") personal certificate verifies the owner's "identity" only insofar as it declares that the sender is the owner of the "From:" email address in the sense that the sender can receive email sent to that address, and so merely proves that an email received really did come from the "From:" address given. It does not verify the person's name or business name. If a sender wishes to enable email recipients to verify the sender's identity in the sense that a received certificate name carries the sender's name or an organization's name, the sender needs to obtain a certificate ("class 2") from a CA who carries out a more in-depth identity verification process, and this involves making inquiries about the would-be certificate holder. For more detail on authentication, see digital signature.

Depending on the policy of the CA, the certificate and all its contents may be posted publicly for reference and verification. This makes the name and email address available for all to see and possibly search for. Other CAs only post serial numbers and revocation status, which does not include any of the personal information. The latter, at a minimum, is mandatory to uphold the integrity of the public key infrastructure.

Obstacles to deploying S/MIME in practice

S/MIME is sometimes considered not properly suited for use via webmail clients. Though support can be hacked into a browser, some security practices require the private key to be kept accessible to the user but inaccessible from the webmail server, complicating the key advantage of webmail: providing ubiquitous accessibility. This issue is not fully specific to S/MIME: other secure methods of signing webmail may also require a browser to execute code to produce the signature; exceptions are PGP Desktop and versions of GnuPG, which will grab the data out of the webmail, sign it by means of a clipboard, and put the signed data back into the webmail page. Seen from the view of security this is the more secure solution.
S/MIME is tailored for end-to-end security. Logically it is not possible to have a third party inspecting email for malware and also have secure end-to-end communications. Encryption will not only encrypt the messages, but also the malware. Thus if mail is scanned for malware anywhere but at the end points, such as a company's gateway, encryption will defeat the detector and successfully deliver the malware. The only solution to this is to perform malware scanning on end user stations after decryption. Other solutions do not provide end-to-end trust as they require keys to be shared by a third party for the purpose of detecting malware. Examples of this type of compromise are:
- Solutions which store private keys on the gateway server so decryption can occur prior to the gateway malware scan. These unencrypted messages are then delivered to end users.
- Solutions which store private keys on malware scanners so that it can inspect messages content, the encrypted message is then relayed to its destination.
Due to the requirement of a certificate for implementation, not all users can take advantage of S/MIME, as some may wish to encrypt a message, with a public/private key pair for example, without the involvement or administrative overhead of certificates.

Any message that an S/MIME email client stores encrypted cannot be decrypted if the applicable key pair's private key is unavailable or otherwise unusable (e.g., the certificate has been deleted or lost or the private key's password has been forgotten). However, an expired, revoked, or untrusted certificate will remain usable for cryptographic purposes. Indexing of encrypted messages' clear text may not be possible with all email clients. Neither of these potential dilemmas is specific to S/MIME but rather cipher text in general and do not apply to S/MIME messages that are only signed and not encrypted.

S/MIME signatures are usually "detached signatures": the signature information is separate from the text being signed. The MIME type for this is multipart/signed with the second part having a MIME subtype of application/(x-)pkcs7-signature. Mailing list software is notorious for changing the textual part of a message and thereby invalidating the signature; however, this problem is not specific to S/MIME, and a digital signature only reveals that the signed content has been changed.

References

↑ RFC 2045: Multipurpose Internet Mail Extensions (MIME). Part One was published in November 1996.

External links

RFC 3369: Cryptographic Message Syntax (CMS)
RFC 3370: Cryptographic Message Syntax (CMS) Algorithms
RFC 3851: Secure/Multipurpose Internet Mail Extensions (S/MIME) Version 3.1 Message Specification
RFC 5751: Secure/Multipurpose Internet Mail Extensions (S/MIME) Version 3.2 Message Specification (Draft Tracker)
Microsoft Exchange Server: Understanding S/MIME (high-level overview).

Free S/MIME certificate issuers

Only for personal use (non-commercial)

Actalis (1 year)
CAcert (6 months or 2 years; not widely trusted)
Comodo Group (1 year)
StartCom (1 year; not widely trusted)
WoSign (1 year; not widely trusted)
Fossa.Me (3 months, not widely trusted)

This article is issued from Wikipedia - version of the 11/22/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.