Saxon VII T

VII T
DR 98 7051 to 98 7079
Quantity 42
Manufacturer Sächsische Maschinenfabrik, Chemnitz
Year(s) of manufacture 1882 – 1894
Retired by 1967
Axle arrangement B n2t
Gauge 1,435 mm (4 ft 8 1⁄2 in)
Empty weight 19.0 t – 20.7 t
Service weight 24.6 t – 26.7 t
Adhesive weight 24.6 t – 26.7 t
Axle load 12.3 t – 10.4 t
Driving wheel diameter 1,100 mm (3 ft 7 in)
Valve gear Allan
No. of cylinders 2
Cylinder bore 355 mm (14.0 in)
Piston stroke 530 mm (21 in)
Boiler Overpressure 12 atm
No. of heating tubes 98
Heating tube length 3,170 mm (10 ft 5 in)
Grate area 0.9 m2 (9.7 sq ft)
Tube heating area 39.0 m2 (420 sq ft)
Evaporative heating area 43.5 m2 (468 sq ft)
Water capacity 2.9 m3 (640 imp gal)
Fuel 0.9 t
Locomotive brakes Counterweight brake

The Saxon Class VII T were twin-coupled tank engines of the Royal Saxon State Railways designed for branch line (Sekundärbahn) operations. In 1925, the Deutsche Reichsbahn grouped these locomotives 1925 into their Class 98.70.

History

The Royal Saxon State Railways grouped all 0-4-0 locomotives into their Class VII T. As well as several engines that came from nationalised railway companies, this class also included 43 units procured by the Royal Saxon Railways themselves.

42 largely identical locomotives were delivered by the Sächsische Maschinenfabrik, formerly Richard Hartmann, to the city of Chemnitz in the period from 1882 to 1894. Initially they were classified as H VII T, but from 1896 just as VII T.

Common to the different delivery batches were driving wheel diameters of 1,130 mm and axle bases of 2,200 mm. The length of the locomotive and the height of the centre of the boiler above the rails were also identical on all models. The locomotives of the last two batches had a steam dome, whilst the older ones just had a Regleraufsatz.

In 1925, the Deutsche Reichsbahn took over 29 locomotives of this type. Five dated to 1882/83 (98 7051 – 98 7055), eleven to 1886 (98 7056 – 98 7066), nine to 1890 (No. 98 7067 – 98 7075) and four to the year 1894 (98 7076 – 98 7079).

Locomotive HEGEL at the Dresden Steam Locomotive Festival in 2011

In 1931, no. 98 7069 became an industrial engine at the repair shop at Chemnitz, but was transferred to the Deutsche Reichsbahn fleet in 1951 as 98 7051. It was not decommissioned until 1967. Other long-serving engines were nos. 98 7065 and 98 7066 served until 1966.

The locomotive with number 98 7056 (formerly 1431 HEGEL) has survived. Until 1964 it belonged to the depot of Dresden-Altstadt and was then given to the Dresden Transport Museum. For many years it was part of their permanent exhibition. Today it has been stored in a museum depot in the old Bw Dresden-Altstadt and is maintained by the Dresden-Altstadt Depot Railway Museum.[1]

H VII T (98 7031)

VII T No. 1418
DR 98 7031
Technical data where different
Number 1
Entered service 1889
Retired 1927
Length over buffers 7,160 mm
Driving wheel diameter 1,220 mm
Top speed 45 km/h
Adhesive weight 213.9 kN
Service weight 213.9 kN

Another engine built in 1889 by the Sächsischen Maschinenfabrik with running number 1418 differed from the other H VII T stock in that it had a longer axle base (2,500 mm), larger coupled wheels and a higher top speed of 45 km/h. It also had a lower overall weight.

This locomotive also joined the Deutschen Reichsbahn fleet in 1925, as 98 7031. Until 1927 it was used as a shed loco in Bw Leipzig Hbf.

See also

References

  1. ↑ "Hegel". igbwdresdenaltstadt.de (in German). Archived from the original on March 9, 2009.

Literature

This article is issued from Wikipedia - version of the 9/5/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.