Snipe (wood machining)

Snipe, in woodworking, is a noticeably deeper cut on the leading and/or trailing end of a board after having passed through a thickness planer or jointer. Its cause, in a jointer, is an out-feed table which is set too low relative to the cutter head, or in a thickness planer, an unnecessarily high setting of the Bed rollers of the in-feed table or a pressure bar which is set too high. ^[1] The term has its origin in forestry where it is applied to a sloping surface or bevel cut on the fore end of a log to ease dragging. (OED)

References

↑ http://newtowoodworking.com/snipe/

Woodworking

Overviews

Forms

Woods

Soft	Cedar (Calocedrus, Cedrus) Cypress Douglas fir Fir Juniper Larch Pine Spruce Yew

Hard	Ash Alder Aspen Balsa Beech Birch Cherry Chestnut Cocobolo Ebony Elm Hazel Lignum vitae Linden (lime, basswood) Mahogany Maple Oak Padauk Plum Poplar Teak Totara Walnut Willow

Tools

Abrasives Axe Adze Chisel Clamp Drawknife Drill Float Mallet Milling machine Mitre box Moulding plane Plane Rasp Router Sandpaper Spokeshave Timber-framing Vise Winding sticks Wood scribe Workbench

Saws	Backsaw Bandsaw Bow Bucksaw Chainsaw Circular Compass Coping Crosscut Frame Fretsaw Jigsaw Keyhole Miter Rip Scroll Veneer Whipsaw

Geometry

Joints	Birdsmouth Bridle Butt Butterfly Coping Crown of thorns Dados Dovetail Finger Groove Halved Hammer-headed tenon Knee Lap Mason's mitre Miter Mortise and tenon Rabbet/Rebate Scarf Splice Tongue and groove

Profiles	Bead Bevel Chamfer Molding Ogee Ogive

Treatments

Organizations

Conversion

Techniques

Category
WikiProject
Commons

This article is issued from Wikipedia - version of the 9/17/2012. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.