Socket 423
 | |
| Type | PGA-ZIF |
|---|---|
| Chip form factors | Organic Land Grid Array (OLGA) on Interposer (OOI) (INT2 and INT3) |
| Contacts | 423 |
| FSB protocol | AGTL+ |
| FSB frequency | 400 MT/s |
| Voltage range | 1.0 - 1.85 V |
| Processor dimensions | 2.1 × 2.1 inches[1] |
| Processors | Intel Pentium 4 (1.3GHz to 2.0GHz) |
| Successor |
Socket 478 Socket 479 (mobile) |
|
This article is part of the CPU socket series | |
Socket 423 is a 423 pin CPU socket used by the first generation of Pentium 4 processors, based on the Willamette core.
Technical specifications
This socket houses any processor designed in the Socket 423 package.
The socket was short-lived, as it became apparent that its electrical design proved inadequate for raising clock speed beyond 2.0 GHz. Intel produced chips using this socket for less than a year, from November 2000 to August 2001. It was replaced by Socket 478.
The processors used with this socket also have a locked multiplier which means that they are not overclockable unless the front side bus frequency is increased. However raising the FSB frequency could push other buses out of spec and thus cause system instability.
The "PowerLeap PL-P4/N" is a device developed in the form of a socket adapter allowing the use of Socket 478 processors in Socket 423.
References
External links
- Socket 423 to 478 adaptor review
- Comparison of Socket 423, Socket 478 and Socket A fan mounting hole positions