Southern Pacific class AC-4

Southern Pacific class AC-4

Southern Pacific 4100 and crew
Type and origin
Power type Steam
Builder Baldwin Locomotive Works
Serial number 60575, 60576, 60623-60625, 60666-60669
Build date August–October 1928
Specifications
Configuration 4-8-8-2
Gauge 4 ft 8 12 in (1,435 mm) standard gauge
Driver dia. 63 in (1,600 mm)
Adhesive weight 475,200 lb (215,500 kg; 215.5 t)
Loco weight 614,600 lb (278,800 kg; 278.8 t)
Boiler pressure 235 psi (1.62 MPa)
Feedwater heater 4¼-BL Worthington
Cylinder size 24 in × 32 in (610 mm × 813 mm) (bore × stroke)
Performance figures
Tractive effort 112,760 lbf (501.6 kN), 116,900 lbf (520 kN) rebuilt
Career
Operators Southern Pacific Railroad
Class AC-4
Number in class 10
Numbers 4100 4109
First run October 1928
Disposition scrapped

Southern Pacific Railroad's AC-4 class of steam locomotives was the first class of 4-8-8-2 cab forward locomotives. They were intended to improve on the railroad's MC class 2-8-8-2 locomotives with a larger firebox.

The AC-4s were the first SP Mallets built for simple expansion. Baldwin Locomotive Works built them in August through October 1928 with a maximum cutoff of 70%, so tractive effort was rated at 112,760 lbf (501.6 kN); a few years later limited cutoff was dropped and calculated tractive effort increased to 116,000 lbf (520 kN).

The AC-4s were removed from service starting in 1953 and all ten were scrapped by June 1955.

References

This article is issued from Wikipedia - version of the 7/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.