Spray-and-vac cleaning

Spray-and-vac cleaning is a “no-touch” method - cleaning is accomplished without the need for workers to touch soiled surfaces with their hands - used in professional cleaning in which a pressurized, diluted cleaning solution is applied to soiled or contaminated surfaces. Using the same machine, the area is then rinsed; this is typically followed by vacuum suctioning that removes the applied liquid along with the suspended solids and dissolved contaminants that have been removed from the surface.[1]

A key advantage of this method over traditional approaches is the ability to deep clean grouted areas (e.g., wall, counter and floor tile) preventing buildup of soil and bacteria in grout lines. Application of a cleaning solution followed by pressurized rinsing and vacuuming removes soil more effectively than methods that rely solely on absorbent wiping (e.g., mopping, microfiber and cleaning cloth use).[1] In addition, studies published by ISSA,[2] the largest cleaning association in the world, have found that compared to legacy methods these systems potentially reduce cleaning times by 1/3 or more.[3]

Unlike outdoor pressure washers with application pressures of 1,000 - 5,000 psi, spray-and-vac units are designed for long-term indoor use on grout and other surfaces, and offer variable application pressures ranging from 110 – 500 psi.

History

The first spray-and-vac system was developed by inventor Robert S. Robinson in 1997. A U.S. Patent was issued in 2001,[4] and the technology has since been licensed by other manufacturers of cleaning equipment. A number of manufacturers in the professional cleaning industry now produce and market spray-and-vac systems or systems that are similar, and approximately 40,000-50,000 units have been sold worldwide[5] Some systems are battery operated; others do not have vacuuming capabilities however they are still classified under this product category.

Spray-and-vac systems first became popular for restroom cleaning. However, over the years, users of the equipment have found a variety of uses for the equipment, including cleaning chairs and tables in cafeterias, cleaning carpets and hard-surface flooring, and deep cleaning a variety of surfaces.[6]

An emerging market for spray-and-vac systems is public schools where the ability of the units to remove organic soils thoroughly, documented by Adenosine triphosphate (ATP) bioluminescence testing, is displacing traditional mop-and-bucket cleaning methods.[7]

Correctional and foodservice markets are also appropriate for this method since they typically feature grouted, ceramic tile floors.[8]

Relationship to Hygienic Cleaning

Recent studies indicate there is not always a high degree of correlation between how clean a surface looks and the levels of contamination actually present. Spray-and-vac systems, however, have been proven scientifically to effectively remove embedded soils and contaminants as well as biological contaminants that are not visible to the naked eye.[9] Such surfaces are typically referred to as “hygienically cleaned.”

Scientific evidence of this is provided through the use of technologies such as Adenosine triphosphate (ATP) bioluminescence rapid-monitoring systems. These systems indicate the presence of organic matter that may host harmful microorganisms on a variety of surfaces. In addition to detecting contaminants, ATP systems also provide “proof of service” that an area has been effectively and thoroughly cleaned.

According to scientific studies using ATP technology, spray-and-vac systems have been proven to remove more contaminants and disease-causing germs and bacteria on surfaces when compared to conventional mop, bucket, and cloth style cleaning.

Additionally, tests show that spray-and-vac systems do not spread contaminants from surface to surface, as can happen when using conventional cleaning methods.[10]

References

  1. 1 2 "Cleaning Methods for Ceramic Tile Floors," Controlled Environments magazine, April 2008, http://www.cemag.us/articles.asp?pid=744
  2. ↑ ISSA, http://www.issa.com
  3. ↑ Official 447 Cleaning Times, prepared by ManageMen and published by ISSA
  4. ↑ Multi-functional cleaning machine Patent #6,206,980 http://www.google.com/patents/about?id=vq8FAAAAEBAJ
  5. ↑ Kaivac, http://www.kaivac.com, Tennant, http://www.tennantco.com/na-en/products/machines/750-all-surface-cleaner.aspx, Hydro, http://www.hydrosystemsco.com/new_ICS8800.asp
  6. ↑ "Emerging Trends In Hard Floor Care," CMM magazine, April 2009, http://www.cmmonline.com/article.asp?IndexID=6637023
  7. ↑ "Measured Results," American School and University magazine, April 2009, http://asumag.com/Maintenance/integrated-cleaning-measurement-schools-200904/index1.html
  8. ↑ Corrections.com, March 2009, http://www.corrections.com/news/article/20959
  9. ↑ "Focus on Tile and Grout Cleaning,” Cleaning & Maintenance Magazine, January 2008, http://www.cmmonline.com/articleprint.asp?print=1&IndexID=6636722
  10. ↑ Cleaning Industry Research Institute (CIRI), May 2008, http://www.bsmmag.com/bsmmag/BSMArticle.asp?id=4427
This article is issued from Wikipedia - version of the 11/20/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.