Synthetic fiber

Synthetic fibers (British English: synthetic fibres) is the result of extensive research by scientists to improve on naturally occurring animal and plant fibres. In general, synthetic fibers are created by extruding fiber forming materials through spinnerets into air and water, forming a thread. Before synthetic fibres were developed, artificially manufactured fibres were made from polymers obtained from petrochemicals. These fibres are called synthetic or artificial fibres. Some fibre s are manufactured from plant-derived cellulose.

Early experiments

Joseph Swan created the first synthetic fiber.

Joseph Swan invented the first synthetic fiber in the early 1880s.[1] His fiber was drawn from a cellulose liquid, formed by chemically modifying the fiber contained in tree bark. The synthetic fiber produced through this process was chemically similar in its potential applications to the carbon filament Swan had developed for his incandescent light bulb, but Swan soon realized the potential of the fiber to revolutionise textile manufacturing. In 1885, he unveiled fabrics he had manufactured from his synthetic material at the International Inventions Exhibition in London.[2]

The next step was taken by Hilaire de Chardonnet, a French engineer and industrialist, who invented the first artificial silk, which he called "Chardonnet silk". In the late 1870s, Chardonnet was working with Louis Pasteur on a remedy to the epidemic that was destroying French silkworms. Failure to clean up a spill in the darkroom resulted in Chardonnet's discovery of nitrocellulose as a potential replacement for real silk. Realizing the value of such a discovery, Chardonnet began to develop his new product,[3] which he displayed at the Paris Exhibition of 1889.[4] Unfortunately, Chardonnet's material was extremely flammable, and was subsequently replaced with other, more stable materials.

Commercial products

Nylon was first synthesized by Wallace Carothers at DuPont.

The first unsuccessful fukin process was developed in 1894 by English chemist Charles Frederick Cross, and his collaborators Edward John Bevan and Clayton Beadle. They named the fiber "viscose", because the reaction product of carbon disulfide and cellulose in basic conditions gave a highly viscous solution of xanthate.[5] The first commercial viscose rayon was produced by the UK company Courtaulds Fibers in 1905. The name "rayon" was adopted in 1924, with "viscose" being used for the viscous organic liquid used to make both rayon and cellophane. A similar product known as cellulose acetate was discovered in 1865. Rayon and acetate are both artificial fibers, but not truly synthetic, being made from wood.[6]

Nylon, the first synthetic fiber, was developed by Wallace Carothers, an American researcher at the chemical firm DuPont in the 1930s. It soon made its debut in the United States as a replacement for silk, just in time for the introduction of rationing during World War II. Its novel use as a material for women's stockings overshadowed more practical uses, such as a replacement for the silk in parachutes and other military uses like ropes.

The first polyester fiber was introduced by John Rex Whinfield and James Tennant Dickson,[7][8] British chemists working at the Calico Printers' Association, in 1941. They produced and patented the first polyester fibre which they named Terylene, also known as Dacron, equal to or surpassing nylon in toughness and resilience.[9] ICI and DuPont went on to produce their own versions of the fibre.

The world production of synthetic fibers was 55.2 million tonnes in 2014.[10]

Description

Synthetic fibers are made from synthesized polymers or small molecules. The compounds that are used to make these fibers come from raw materials such as petroleum based chemicals or petrochemicals. These materials are polymerized into a long, linear chemical that bond two adjacent carbon atoms. Differing chemical compounds will be used to produce different types of fibers.

Synthetic fibers account for about half of all fiber usage, with applications in every field of fiber and textile technology. Although many classes of fiber based on synthetic polymers have been evaluated as potentially valuable commercial products, four of them - nylon, polyester, acrylic and polyolefin - dominate the market. These four account for approximately 98 percent by volume of synthetic fiber production, with polyester alone accounting for around 60 per cent.[11]

There are several methods of manufacturing synthetic fibers but the most common is the Melt-Spinning Process. It involves heating the fiber until it begins to melt, then you must draw out the melt with tweezers as quickly as possible. The next step would be to draw the molecules by aligning them in a parallel arrangement. This brings the fibers closer together and allows them to crystallize and orient. Lastly, is Heat-Setting. This utilizes heat to permeate the shape/dimensions of the fabrics made from heat-sensitive fibers.

Advantages

Synthetic fibers are more durable than most natural fibers and will readily pick-up different dyes. In addition, many synthetic fibers offer consumer-friendly functions such as stretching, waterproofing and stain resistance. Sunlight, moisture, and oils from human skin cause all fibers to break down and wear away. Natural fibers tend to be much more sensitive than synthetic blends. This is mainly because natural products are biodegradable. Natural fibers are susceptible to larval insect infestation; synthetic fibers are not a good food source for fabric-damaging insects.

Compared to natural fibers, many synthetic fibers are more water resistant and stain resistant. Some are even specially enhanced to withstand damage from water or stains. Some fabrics are also designed to stretch in specific ways, which makes them more comfortable to wear.

Cotton production is resource intensive: it takes significant amounts of water to farm cotton. Wool producing sheep also need water and grazing land in order to survive. Thus it is claimed by some that although synthetic fiber production does involve some carbon emissions, the environmental footprint of many fibers is much lower.

Disadvantages

A device for spinning Viscose Rayon dating from 1901

Most of synthetic fibers' disadvantages are related to their low melting temperature:

Common synthetic fibers

Common synthetic fibers include:

Specialty synthetic fibers include:
  • Sulfar (1983)
  • Lyocell (1992) (artificial, not synthetic)
  • PLA (2002)
  • M-5 (PIPD fiber)
  • Orlon
  • Zylon (PBO fiber)
  • Vectran (TLCP fiber) made from Vectra LCP polymer
  • Derclon used in manufacture of rugs

Other synthetic materials used in fibers include:

Modern fibers that are made from older artificial materials include:

In the horticulture industry synthetics are often used in soils to help the plants grow better. Examples are:

See also

References

  1. ↑ "Sir Joseph Wilson Swan". Encylopaedia Britannica. Retrieved 27 April 2015.
  2. ↑ How It Works: Science and Technology. Marshall Cavendish Corporation. 2003. p. 851. ISBN 9780761473145.
  3. ↑ Garrett, Alfred (1963). The Flash of Genius. Princeton, New Jersey: D. Van Nostrand Company, Inc. pp. 48–49.
  4. ↑ Editors, Time-Life (1991). Inventive Genius. New York: Time-Life Books. p. 52. ISBN 0-8094-7699-1.
  5. ↑ Day, Lance; Ian McNeil (1998). Biographical Dictionary of the History of Technology. Taylor & Francis. p. 113. ISBN 0415193990.
  6. ↑ Woodings, Calvin R. "A Brief History of Regenerated Cellulosic Fibres". WOODINGS CONSULTING LTD. Retrieved 26 May 2012.
  7. ↑ "World of Chemistry". Thomson Gale. 2005. Retrieved 1 November 2009.
  8. ↑ Allen, P (1967). "Obituary". Chemistry in Britain.
  9. ↑ Frank Greenaway, ‘Whinfield, John Rex (1901–1966)’, rev. Oxford Dictionary of National Biography, Oxford University Press, 2004 accessed 20 June 2011
  10. ↑ Man-Made Fibers Continue To Grow, Textile World
  11. ↑ Edited by J E McIntyre, Professor Emeritus of Textile Industries, University of Leeds, UK (eds.). Synthetic fibres: Nylon, polyester, acrylic, polyolefin. Woodhead Publishing - Series in Textiles. 36. Cambridge.

Further reading

This article is issued from Wikipedia - version of the 12/4/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.