Thin-wall injection molding

Thin wall injection molding is a specialized form of conventional injection molding that focuses on mass-producing plastic parts that are thin and light so that material cost savings can be made and cycle times can be as short as possible. Shorter cycle times means higher productivity and lower costs per part.[1]

The definition of thin wall is really about the size of the part compared to its wall thickness. For any particular plastic part, as the wall thickness reduces the harder it is to manufacture using the injection molding process. The size of a part puts a limit on how thin the wall thickness can be. For packaging containers thin wall means wall thicknesses that are less than 0.025 inch (0.62mm) with a flow length to wall thickness greater than 200.[1]

Markets

The trend towards thin wall molding continues to increase in many plastic industries as plastic material and energy costs continue to rise and delivery lead times are squeezed.[2]

The following industries make use of thin wall molding:

Benefits

Disadvantages

Examples

Plastic resins suitable for thin-wall molding should have high-flow properties, particularly low melt viscosity. In addition, they need to be robust enough to avoid degradation from the heat generated by high shear rates (high injection speeds)[5]

Some plastic manufacturers make plastics specifically for thin wall applications that have excellent flow properties inside the mold cavity. For example, plastic manufacturer Sabic has a polypropylene food contact grade plastic which is specifically designed for thin wall margarine containers and lids.[7]

Another plastic manufacturer, Bayer, makes a blend of Polycarbonate (PC) and Acrylonitrile butadiene styrene (ABS) specifically designed to make thin wall mobile housings.[8]

Equipment

Plastic injection molding machine

Compared to conventional injection molding, thin wall molding requires molding machines that are designed and built to withstand higher stresses and injection pressures. The molding machines computer control should also be precise in order to make quality parts. For this reason these molding machines are more expensive than general purpose machines.

Thin-wall-capable machines usually also have accumulator-assisted clamps to accommodate fast cycle times.[9]

Regular maintenance schedules must be completed so that the machine and part quality does not suffer. These machines usually work 24/7 so they need to be well maintained.[10]

Injection mold design

As with the injection molding machines, injection molds need to be robust enough to withstand high stresses and pressures.[5] Heavy mold construction with through hardened tool steels will ensure a long lasting mold.

The mold must also have a well designed cooling system so that heat can be quickly extracted from the hot plastic part allowing fast cycle times. To achieve this, cooling channels need to be designed close to the molding surface. Cleaning the mould on a daily basis is also a critical requirement to maintain the part quality.

Robotics

In countries where manual labour is expensive, robots are commonly used to remove the plastic parts from the mold and order them into equal stacks. These robots are fixed to the molding machine and need to be fast and reliable.

Plastic injection molding process

The range of process settings that can be employed for thin wall molded parts is considerably narrower compared to conventional injection molding. Even with optimally designed parts and moulds it is still more difficult to produce parts with thin walls.[8]

Consistent injection process parameters are required to maintain quality parts in thin wall molding.[11] A properly trained molding technician will ensure the process produces quality parts over the long term because he understands and appreciates the extreme limits at which the process operates.

References

  1. 1 2 [Evalene PHJ4501: Superior Material For Thin-Wall Injection Molding by Jums Belezza, JG Summit Petrochemical Corporation, 2006]
  2. 1 2 [Consumer Products: Customer Demands for Thinner Walls and Lightweight Designs Pose Challenges for Moldmakers, Mold Making Technology Magazine, 6/20/2011]
  3. 1 2 [Thin wall packaging users are seeking more from less by Chris Smith, Injection World Magazine, April 2012]
  4. 1 2 [Lightening Up The Auto Industry by Chris Smith, Injection World Magazine, June 2012]
  5. 1 2 3 [Using thin wall to create medical devices, by Clare Frissora and Greg Tremblay, Medical Device and Diagnostic Magazine, July 1, 2008]
  6. ↑ [SABIC’S XENOY IQ* RESIN HELPS CANON ELECTRONICS MEET GLOBAL CUSTOMER DEMAND FOR ECO-RESPONSIBLE PRODUCTS WITH NEW SCANNER HOUSING, PITTSFIELD, Ma./ USA -- April 2, 2012
  7. ↑ [Stretching the limits in rigid packaging by Chris Smith, Injection world Magazine, March 2012]
  8. 1 2 [Bayer Materials Science, "Thin-wall technology in the mobile phone industry" ATI 978 d,e]01/03/1997
  9. ↑ [Injection Moulding Pocketbook, Mannesmann Demag, Kunststofftecknik, p131]
  10. ↑ [The maintenance route to cost reduction by Jerry Claunch, Injection World Magazine, April 2011]
  11. ↑ [Injection Moulding Pocketbook, Mannesmann Demag, Kunststofftecknik, p106]
This article is issued from Wikipedia - version of the 9/9/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.