Torva 15

Torva 15
Role Glider
National origin United Kingdom
Manufacturer Torva Sailplanes
Designer John Sellars
First flight 8 May 1971
Number built 2


The Torva 15 was a single-seat glider designed and built in United Kingdom from 1970.

Development

The Torva 15 was designed as a reasonably priced single seater glider, with reasonable performance, suitable for club and competition flying. Two versions were designed; one with flaps, retractable main-wheel and provision for water ballast named Sport, and one with fixed undercarriage covered by a fairing, called Sprite. Construction of the Torva 15 gliders was of glassfibre with foam filling and plywood frames ribs and re-inforcement. The specially modified Wortmann aerofoil section endowed the Torva 15's with good climb performance in typical British weak thermals and reduced the stalling speed to allow easy field landings. The smooth lines of the fuselage were unbroken by the one-piece canopy, which hinged to the side to allow easy access to the comfortable cockpit, with the tail section, integral with the rear fuselage, supporting a cruciform style tail assembly. Large airbrakes in the wings allowed for accurate landings and approach control as well as limiting the maximum speed attainable. The first flight of the Torva 15 Sport, piloted by Chris Riddell, was on 8 May 1971. The Torva company was closed before production could start and the two prototypes were acquired by Chris Riddell.

Variants

Specifications (Torva 15 Sport)

Data from Coates, Andrew. “Jane's World Sailplanes & Motor Gliders new edition”. London, Jane's. 1980. ISBN 0-7106-0017-8

General characteristics

Performance

See also

Aircraft of comparable role, configuration and era
Related lists

References

    This article is issued from Wikipedia - version of the 6/23/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.