Van's Aircraft RV-7

RV-7
Role RV-7
Manufacturer Van's Aircraft
Designer Richard VanGrunsven
First flight 2001[1]
Introduction 2001
Number built 1394 (November 2014)[2]
Unit cost
USD$41,000-$97,000[3]
Developed from Van's Aircraft RV-6
An RV-7 on display at Sun n Fun 2004. This is the tail wheel equipped version
An RV-7A – the nose wheel equipped version of the RV-7 at Sun n Fun 2006
RV-7 with amphibious floats

The Van's RV-7 and RV-7A are two-seat, single-engine, low-wing homebuilt airplanes sold in kit form by Van's Aircraft. The RV-7 is the tail-wheel equipped version, while the RV-7A features a nose-wheel.[4]

The RV-7 is the replacement for the RV-6 and is externally similar to the earlier model, with longer wings, larger fuel tanks and a larger rudder to improve spin recovery characteristics.[5]

Development

The designer of the Van’s aircraft line, Richard VanGrunsven, designed the RV-7 series as a replacement for the RV-6. The RV-6 itself was a two seat side-by-side development of the RV-4, which was, in turn, a two seat version of the single seat RV-3.[6]

The RV-7 incorporated many changes as a result of lessons learned over the years in producing over 2,000 RV-6 kits. The RV-7 airframe will accept larger engines, including the Lycoming IO-360, up to 200 hp (149 kW). The RV-7 also has increased wingspan and wing area over the RV-6, as well as more headroom, legroom and an increased useful load. The RV-7 carries a total of 42 US gallons of fuel, up from 38 US gallons on the RV-6.[6]

The RV-7 shares many common parts with the RV-8 and RV-9 which reduces production costs. The RV-7 also uses computer assisted design to produce a kit with pre-punched rivet holes, thus greatly reducing assembly time for the builder. Construction time is estimated at about 1500 hours for an average builder.[3]

The RV-7A version features a hardened, solid steel nose wheel strut that fits into a tube welded to the engine mount. As in all nose-wheel equipped RV aircraft, the nosewheel is free castering and the aircraft is steered with differential braking, or rudder at higher taxi speeds. The brakes are conventional toe brakes.

By November 2014, 1394 RV-7s and RV-7As had been completed and were flying.[2]

Pricing

As of July 2013, the price of the "standard build" RV-7 kit was US$21,510 and the "quick-build" kit US$33,675.[7]

In 2008 Van's claimed that most builders can complete their RV-7 projects for between US$41,000 - $97,000.[3]

Specifications (RV-7)

Specifications are given for 200 hp, IO-360 configuration with a Hartzell constant speed propeller

General characteristics

Performance

See also

Related development
Aircraft of comparable role, configuration and era

References

  1. ↑ Van's Aircraft (2008). "Introduction - About RV Kitplanes". Retrieved 2008-09-21.
  2. 1 2 Vans Aircraft (5 April 2013). "First Flights". Retrieved 5 April 2013.
  3. 1 2 3 Kitplanes Staff: 2008 Kit Aircraft Directory, page 77, Kitplanes Magazine December 2007 Volume 24, Number 12, Belvior Publications, Aviation Publishing Group LLC.
  4. ↑ Vandermeullen, Richard: 2011 Kit Aircraft Buyer's Guide, Kitplanes, Volume 28, Number 12, December 2011, page 74. Belvoir Publications. ISSN 0891-1851
  5. ↑ Vans Aircraft (June 2002). "Service Bulletin SB02-6-1" (PDF). Retrieved 2013-08-04.
  6. 1 2 Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011-12, page 125. WDLA UK, Lancaster UK, 2011. ISSN 1368-485X
  7. ↑ Van's Aircraft (July 2013). "Kit Prices and Lead Times". Retrieved 2013-08-03.
Wikimedia Commons has media related to Van's Aircraft RV-7.
This article is issued from Wikipedia - version of the 11/13/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.