Washington State Route 220

State Route 220 marker

State Route 220

A map indicating the path that SR 220 takes through the county.

A red line indicating the path of SR 220 through Yakima County.
Route information
Auxiliary route of SR 22
Defined by RCW 47.17.420
Length: 27.42 mi[1] (44.13 km)
Existed: 1964 – 1992
Major junctions
West end: Fort Simcoe State Park
  US 97 in Toppenish
East end: SR 22 in Toppenish
Highway system

State Route 220 (SR 220) was a 27.42-mile (44.13 km) long state highway located entirely in the Yakama Indian Reservation, Yakima County, Washington, United States. The highway linked Fort Simcoe State Park in the west to White Swan and Toppenish in the east. The highway had been built sometime between 1915 and 1937, and was renumbered from Secondary State Highway 3B during the 1964 state highway renumbering. The route was slated to be removed from the state highway system during the 1991 legislative session, and was removed April 1, 1992.

Route description

SR 220 started at Fort Simcoe State Park, headed easterly along Fort Simcoe Road until it intersected Hawk Road. At the t intersection with Hawk Road, the highway turned north and follows Hawk Road until an intersection with White Swan Road. The highway turned back east along White Swan Road, passing through downtown White Swan, before turning south along Curtis Street. The highway passed over a BNSF Railway rail line, formerly part of the Toppenish, Simcoe & Western Railroad, before Curtis street turned easterly and became Fort Road.[2] Fort Road continued almost perfectly east for about 18 mi (29 km) before intersecting US Route 97 (US 97). After crossing US 97, the highway continued as a city street through west Toppenish before terminating at SR 22.[3]

Every year the Washington State Department of Transportation (WSDOT) conducts a series of surveys on its highways in the state to measure traffic volume. This is expressed in terms of average annual daily traffic (AADT), which is a measure of traffic volume for any average day of the year. In 1991, WSDOT calculated that as few as 340 cars used the highway at the western terminus and as many as 9,300 cars at the interchange with SR 22.[4]

History

The highway was first constructed some time between 1915 and 1937,[5] with a segment linking Fort Simcoe to White Swan completed by 1937.[6] The highway was signed as Secondary State Highway 3B (SSH 3B) between White Swan and Toppenish until the 1964 state highway renumbering when the SR 220 number was applied to the highway.[7][8] The original eastern terminus was US 97, but in 1971 the terminus was extended to SR 22.[9] The highway was de-legislated in 1991 along with eleven other highways, and was removed from the system effective April 1, 1992.[10]

Today

All of the roads that SR 220 were routed along are still accessible, and have been designated major collector roads by WSDOT. The entirety of the former routing of SR 220 has been designated Classified Route S390.[11][12] The city of Toppenish is eligible to receive hardship funding for the former highway between the junction with SR 22 to near Linden Road, a span of .27 mi (430 m).[13]

Major intersections

A wooden structure in the middle of a field
The blockhouse at Fort Simcoe

The entire highway was in Yakima County. [14]

Location[14]mi[1]kmDestinationsNotes
Fort Simcoe0.000.00 Fort Simcoe State ParkAt-grade intersection, western terminus
26.96–
27.01
43.39–
43.47
US 97 Wapato, Goldendale
Toppenish27.4244.13 SR 22 to I82 / US 12 Yakima, SatusAt-grade intersection, eastern terminus
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

References

  1. 1 2 "State Highway Log Planning Report 1991" (PDF). Washington State Department of Transportation (WSDOT). p. 941. Retrieved October 26, 2010.
  2. Yakima County (Map). Yakima County. 1921. Retrieved October 26, 2010.
  3. Google (October 26, 2010). "Former SR 220" (Map). Google Maps. Google. Retrieved October 26, 2010.
  4. "1991 Annual Traffic Report" (PDF). WSDOT. p. 118. Retrieved October 26, 2010.
  5. Washington State Highway Map (Map). Cartography by Washington State Highway Commission. Rand McNally. 1915. Retrieved October 26, 2010.
  6. White Swan Quadrangle (Map). 1:125,000. United States Geological Survey (USGS). 1937. Retrieved October 26, 2010.
  7. Washington State Highway Map (Map). Washington State Highway Commission. 1939. Retrieved October 26, 2010.
  8. "Sign Route Numbers with Corresponding Legislative Highway Numbers" (PDF). Washington State Department of Highways. Retrieved October 26, 2010.
  9. Bozanich, Mark. "State Route 220". Highways of Washington State. Retrieved October 26, 2010.
  10. "Chapter 47.17.420: State highway routes". Revised Code of Washington. Washington State Legislature. Retrieved October 26, 2010.
  11. Functional Classification of Public Roads – Yakima County Map No. 5 (PDF) (Map). WSDOT. 2003. Retrieved October 26, 2010.
  12. Functional Classification of Public Roads – Yakima County Map No. 6 (PDF) (Map). WSDOT. 2003. Retrieved October 26, 2010.
  13. "WAC 479-10-220: What routes are eligible for city hardship assistance program funds.". Washington State Legislature. November 2, 2008. Retrieved November 14, 2010.
  14. 1 2 The Road Atlas (Map). 1 in ≈ 20 mi. Cartography by Rand McNally. Rand McNally. 2009. p. 109. § J11-12. ISBN 978-0-528-94219-8.

Route map: Bing / Google

KML is from Wikidata
This article is issued from Wikipedia - version of the 11/10/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.