Dimethylmercury

Dimethylmercury
Names
IUPAC name
Dimethylmercury[1]
Identifiers
593-74-8 N
3D model (Jmol) Interactive image
3600205
ChEBI CHEBI:30786 YesY
ChemSpider 11155 YesY
ECHA InfoCard 100.008.916
EC Number 209-805-3
25889
MeSH dimethyl+mercury
PubChem 11645
RTECS number OW3010000
UNII C60TQU15XY YesY
UN number 3383
Properties
HgC
2H
6
Molar mass 230.66 g mol−1
Appearance Colorless liquid
Odor Sweet
Density 2.961 g mL−1
Melting point −43 °C (−45 °F; 230 K)
Boiling point 93 to 94 °C (199 to 201 °F; 366 to 367 K)
1.543
Thermochemistry
57.9–65.7 kJ mol−1
Hazards
GHS pictograms
GHS signal word DANGER
H300, H310, H330, H373, H410
P260, P264, P273, P280, P284, P301+310
T+ N
R-phrases R26/27/28, R33, R50/53
S-phrases (S1/2), S13, S28, S36, S45
NFPA 704
Flammability code 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g., propane Health code 4: Very short exposure could cause death or major residual injury. E.g., VX gas Reactivity code 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g., calcium Special hazards (white): no codeNFPA 704 four-colored diamond
4
4
1
Flash point 5 °C (41 °F; 278 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Dimethylmercury ((CH3)2Hg) is an organomercury compound. This colorless liquid is one of the strongest known neurotoxins. It is described as having a slightly sweet smell, although inhaling enough vapor to detect its odor would be hazardous.[2]

Synthesis, structure, reactions

The compound was one of the earliest organometallics reported, reflecting its considerable stability. It is formed by treating sodium amalgam with methyl halides:

Hg + 2 Na + 2 CH3I → Hg(CH3)2 + 2 NaI

It can also be obtained by alkylation of mercuric chloride with methyllithium:

HgCl2 + 2 LiCH3 → Hg(CH3)2 + 2 LiCl

The molecule adopts a linear structure with Hg-C bond lengths of 2.083 Å.[3]

Reactions

The most striking feature of the compound is its nonreactivity toward water, whereas the corresponding organocadmium and organozinc compounds hydrolyze rapidly. The difference reflects the low affinity of Hg(II) for oxygen ligands. The compound reacts with mercuric chloride to give the mixed chloro-methyl compound:

(CH3)2Hg + HgCl2 → 2 CH3HgCl

Whereas dimethylmercury is a volatile liquid, CH3HgCl is a crystalline solid.

Use

Dimethylmercury currently has few applications because of the risks involved. As with many methyl-organometallics, it is a methylating agent that can donate its methyl groups to an organic molecule; however, the development of less acutely toxic nucleophiles such as dimethylzinc and trimethylaluminium, and the subsequent introduction of Grignard reagents (organometallic halides), has essentially rendered this compound obsolete in organic chemistry. It was formerly studied for reactions in which the methylmercury cation was bonded to the target molecule, forming potent bactericides; however, the bioaccumulation and ultimate toxicity of methylmercury has largely led it to be abandoned for this purpose in favor of the less toxic diethylmercury and ethylmercury compounds, which perform a similar function without the bioaccumulation hazard.

In toxicology, it was formerly used as a reference toxin. It has also been used to calibrate NMR instruments for detection of mercury, although diethylmercury and less toxic mercury salts are now preferred.[4][5][6]

Safety

Dimethylmercury is extremely toxic and dangerous to handle. Absorption of doses as low as 0.1 mL can result in severe mercury poisoning.[7] The risks are enhanced because of the high vapor pressure of the liquid.[7]

Permeation tests showed that several types of disposable latex or polyvinyl chloride gloves (typically, about 0.1 mm thick), commonly used in most laboratories and clinical settings, had high and maximal rates of permeation by dimethylmercury within 15 seconds.[8] The American Occupational Safety and Health Administration advises handling dimethylmercury with highly resistant laminated gloves with an additional pair of abrasion-resistant gloves worn over the laminate pair, and also recommends using a face shield and working in a fume hood.[7][9]

Dimethylmercury crosses the blood–brain barrier easily, probably owing to formation of a complex with cysteine.[10] It is eliminated from the organism slowly, and therefore has a tendency to bioaccumulate. The symptoms of poisoning may be delayed by months, resulting in many cases in which a diagnosis was ultimately discovered, but only at the point in which it is often too late for an effective treatment regimen to be successful.[10]

The toxicity of dimethylmercury was highlighted with the death of the inorganic chemist Karen Wetterhahn of Dartmouth College in 1997. After spilling no more than a few drops of this compound on her latex-glove, the barrier was immediately compromised and within seconds it was absorbed into the back of her hand, quickly circulating and resulting in her death ten months later.[7] This accident is a common toxicology case-study and spurred the development of modern advanced chemical-protection clothing which is now used when any exposure to severely toxic and/or highly penetrative substances is possible (e.g., in chemical munitions stockpiles and decontamination facilities).

See also

References

  1. ↑ "dimethyl mercury - Compound Summary". PubChem Compound. USA: National Center for Biotechnology Information. 16 September 2004. Identification and Related Records. Retrieved 10 March 2012.
  2. ↑ Agency for Toxic Substances and Disease Registry (March 1999). "Toxological profile for mercury". United States Department of Health and Human Services, Public Health Service. Retrieved 16 August 2014.
  3. ↑ Holleman, A. F.; Wiberg, E. (2001). Inorganic Chemistry. San Diego: Academic Press. ISBN 0-12-352651-5.
  4. ↑ O'Halloran, T. V.; Singer, C. P. (1998-03-10). "199Hg Standards". Northwestern University. Retrieved 2012-05-24.
  5. ↑ Hoffman, R. (2011-08-01). "(Hg) Mercury NMR". Jerusalem: The Hebrew University. Retrieved 2012-05-24.
  6. ↑ "Delayed Toxic Syndromes" (pdf). Terrorism by Fear and Uncertainty. ORAU.
  7. 1 2 3 4 "OSHA Safety Hazard Information Bulletin on Dimethylmercury". Safety and Health Information Bulletins (SHIBs), 1997-1998. OSHA. 1991-02-15.
  8. ↑ Nierenberg, David W.; Nordgren, Richard E.; Chang, Morris B.; Siegler, Richard W.; Blayney, Michael B.; Hochberg, Fred; Toribara, Taft Y.; Cernichiari, Elsa; Clarkson, Thomas (1998). "Delayed Cerebellar Disease and Death after Accidental Exposure to Dimethylmercury". New England Journal of Medicine. 338 (23): 1672–1676. doi:10.1056/NEJM199806043382305. PMID 9614258.
  9. ↑ Cotton, S. (October 2003). "Dimethylmercury and Mercury Poisoning. The Karen Wetterhahn story". Molecule of the Month. Bristol University.
  10. 1 2 "The Karen Wetterhahn story". Retrieved 1 September 2014.
This article is issued from Wikipedia - version of the 12/2/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.