HPD ARX-04b
| Category |
Le Mans Prototype (LMP2) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Constructor | Wirth Research | ||||||||
| Designer(s) | Wirth Research | ||||||||
| Predecessor | HPD ARX-03b | ||||||||
| Technical specifications[1][2] | |||||||||
| Chassis | Carbon fibre composite monocoque | ||||||||
| Suspension (front) | Double wishbones, push-rod actuated coil springs and four-way adjustable dampers, anti-roll bar | ||||||||
| Suspension (rear) | Double wishbones, push-rod actuated coil springs and four-way adjustable dampers, anti-roll bar | ||||||||
| Engine | Honda HR28TT 2.8 litre V6 twin turbo mid-engined, longitudinally mounted | ||||||||
| Transmission | 6-speed sequential manual | ||||||||
| Weight | 900kg | ||||||||
| Fuel | Shell | ||||||||
| Tyres | Continental | ||||||||
| Competition history | |||||||||
| Notable entrants |
 Extreme Speed Motorsports | ||||||||
| Notable drivers |
Ed Brown Jon Fogarty Johannes van Overbeek Scott Sharp Ryan Dalziel David Heinemeier Hansson | ||||||||
| Debut | 2015 24 Hours of Daytona | ||||||||
| |||||||||
| Constructors' Championships | 0 | ||||||||
| Drivers' Championships | 0 | ||||||||
The HPD ARX-04b is an LMP2 race car designed and built by Wirth Research for Honda Performance Development. The car was designed as the successor to the HPD ARX-03 series of Le Mans Prototypes, however the poor performance of the car meant that the older model outlived the ARX-04b, and the 04b only contested one race, the 2015 24 Hours of Daytona.
Racing History
The car was designed to meet the new set of LMP2 regulations, starting in 2014. Two cars were delivered to its sole customer, Extreme Speed Motorsports, in December 2014, where it soon began testing.[2] The team intended to use the cars in the 2015 United SportsCar Championship, starting at the 24 Hours of Daytona. The cars were uncompetitive during the race, and both cars failed to reach the finish. The #1 car managed to complete 389 laps to the winners 740, but the #2 car managed only 50.
Following the disappointment of Daytona, Extreme Speed Motorsport decided to take time to test the car further, opting to race the older HPD ARX-03c at Sebring. The team remained unsatisfied with the car, and chose to replace them with the Ligier JS P2.[3] Daytona remains the only race outing of the ARX-04. HPD continued to test and develop the car, to try and resolve aerodynamic problems and improve its performance.
The ARX-04 was also entered into the 2015 Pikes Peak International Hillclimb, with Justin Wilson assigned to drive the car. However, reliability issues meant that the car was unable to drive in the event.[4][5]
In 2016, a revised version of the ARX-04b was tested by Michael Shank Racing. Shank later praised the improvements that the car has made. The car was later used by Shank to test the 2017 Continental tyres for the upcoming season [6][7][8]
References
- ↑ "HPD ARX-04 Specifications". "Ultimate Car Page". Retrieved 2016-08-20.
- 1 2 "HPD ARX-04 Specifications". "Racecar Engineering". Retrieved 2016-09-06.
- ↑ "HPD ARX-04 replaced by Ligier". "Autosport". Retrieved 2016-10-10.
- ↑ "HPD ARX-04 Entered at Pikes Peak". "Motorsport.com". Retrieved 2016-10-10.
- ↑ "HPD ARX-04 withdrawn from Pikes Peak". "Autoblog.com". Retrieved 2016-10-10.
- ↑ "HPD ARX-04 to be tested by Shank". "Sportscar365.com". Retrieved 2016-10-10.
- ↑ "Shank impressed with ARX-04". "racer.com". Retrieved 2016-10-10.
- ↑ "HPD ARX-04 Tyre Test". "Sportscar365.com". Retrieved 2016-10-10.
