ISO 31000

ISO 31000 is a family of standards relating to risk management codified by the International Organization for Standardization. The purpose of ISO 31000:2009 is to provide principles and generic guidelines on risk management. ISO 31000 seeks to provide a universally recognised paradigm for practitioners and companies employing risk management processes to replace the myriad of existing standards, methodologies and paradigms that differed between industries, subject matters and regions.

Currently, the ISO 31000 family is expected to include:

ISO also designed its ISO 21500 Guidance on Project Management standard to align with ISO 31000:2009.[2]

Introduction

ISO 31000 was published as a standard on 13 November 2009, and provides a standard on the implementation of risk management. A revised and harmonised ISO/IEC Guide 73 was published at the same time. The purpose of ISO 31000:2009 is to be applicable and adaptable for "any public, private or community enterprise, association, group or individual."[3] Accordingly, the general scope of ISO 31000 - as a family of risk management standards - is not developed for a particular industry group, management system or subject matter field in mind, rather to provide best practice structure and guidance to all operations concerned with risk management.

Scope

ISO 31000:2009 provides generic guidelines for the design, implementation and maintenance of risk management processes throughout an organization. This approach to formalizing risk management practices will facilitate broader adoption by companies who require an enterprise risk management standard that accommodates multiple ‘silo-centric’ management systems.[4]

The scope of this approach to risk management is to enable all strategic, management and operational tasks of an organization throughout projects, functions, and processes to be aligned to a common set of risk management objectives.

Accordingly, ISO 31000:2009 is intended for a broad stakeholder group including:

Risk conceptualisation

Main article: Risk

One of the key paradigm shifts proposed in ISO 31000 is a controversial change in how risk is conceptualised. Under the ISO 31000:2009 and a consequential major revision of the terminology in ISO Guide 73, the definition of "risk" is no longer "chance or probability of loss", but "the effect of uncertainty on objectives" ... thus causing the word "risk" to refer to positive possibilities as well as negative ones.

Framework approach

ISO 31000:2009 has been developed on the basis of an existing standard on risk management, AS/NZS 4360:2004 (In the form of AS/NZS ISO 31000:2009). Whereas the initial Standards Australia approach provided a process by which risk management could be undertaken, ISO 31000:2009 addresses the entire management system that supports the design, implementation, maintenance and improvement of risk management processes.

Implementation

The intent of ISO 31000 is to be applied within existing management systems to formalise and improve risk management processes as opposed to wholesale substitution of legacy management practices. Subsequently, when implementing ISO 31000, attention is to be given to integrating existing risk management processes in the new paradigm addressed in the standard.

The focus of many ISO 31000 'harmonisation' programmes[5] have centred on:

Implications

Most implications for adopting the new standard concern the re-engineering of existing management practices to conform with the documentation, communication and socialisation of the new risk management operating paradigm; as opposed to wholesale re-orientation of management practice throughout an organisation. Accordingly, most senior position holders in an enterprise risk management organisation will need to be cognisant of the implication for adopting the standard and be able to develop effective strategies for implementing the standard across supply chains and commercial operations.[6]

Certain aspects of top management accountability, strategic policy implementation and effective governance frameworks, will require more consideration by organisations that have previously used now redundant risk management methodologies.

In some domains that concern risk management, in particular security and corporate social responsibility, which may operate using relatively unsophisticated risk management processes, more material change will be required, particularly regarding a clearly articulated risk management policy, formalising risk ownership processes, structuring framework processes and adopting continuous improvement programmes.

Managing risk

ISO 31000:2009 gives a list on how to deal with risk:

  1. Avoiding the risk by deciding not to start or continue with the activity that gives rise to the risk
  2. Accepting or increasing the risk in order to pursue an opportunity
  3. Removing the risk source
  4. Changing the likelihood
  5. Changing the consequences
  6. Sharing the risk with another party or parties (including contracts and risk financing)
  7. Retaining the risk by informed decision

Accreditation

ISO 31000 has not been developed with the intention for certification. (2009)

See also

References

  1. ↑ ISO: ISO/IEC 31000 page
  2. ↑ "New ISO standard on project management". ISO. 2012.
  3. ↑ ISO 31000 catalogue http://www.iso.org/iso/catalogue_detail.htm?csnumber=43170
  4. ↑ ISO 31000 Update
  5. ↑ ISO 31000 update: What it means to C-Suite Risk Owners
  6. ↑ Implications for ISO adoption http://www.optaresystems.com/index.php/optare/publication_detail/iso_31000_update_what_it_will_mean_for_a_cso/

External links

This article is issued from Wikipedia - version of the 9/20/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.