ISO 5775

ISO 5775 is an international standard for labeling the size of bicycle tires and rims. The system used was originally developed by the European Tyre and Rim Technical Organisation (ETRTO). It is designed to make tire sizing consistent and clear. It replaces overlapping informal systems that ambiguously distinguished between sizes. For example, at least 6 different "26 inch" sizes exist (just by American notation), and "27 inch" wheels have a larger diameter than American "28 inch" (French "700C") wheels.

Tires

Wired-edge tires

Wired-edge tires can be mounted on straight-side or crochet-type (aka hook bead) rims. Such tires are designated with their nominal width and their nominal rim diameter, separated by a hyphen (-). Both are measured in millimeters. A typical example of a tire marking according to ISO 5775-1 is:

32-597 inflate to 400 kPa

The first number (nominal section width) is essentially the width of the inflated tire (minus any tread).
The second number (nominal rim diameter) is the inner diameter of the tire when it is mounted on the rim. The corresponding circumference can be measured with a suitably narrow tape inside the rim.
The recommended inflation pressure is marked in kilopascals.

The standard notes that the minimum inflation pressure recommended is 300 kPa for narrow tires (25 mm section width or less), 200 kPa for other sizes in normal highway service, and 150 kPa for off-the-road service.

The inner width of the rim on which the tire is mounted should be about 65% of the tire's nominal section width for tires smaller than 30 mm and 55% for those larger.

The section height of a tire is usually identical to its section width (for tires less than 28 mm, 2.5 mm have to be added to the width to get the height). The overall diameter of the tire is then the rim diameter plus twice the tire's section height. The ISO 5775-1 standard also defines procedures for measuring tires and for calculating from the marking the maximum dimensions of a tire, which are needed by designers to determine clearance distances to other bicycle components.

Nominal section widths

The standard defines a set of nominal section widths for wired-edge tires and lists recommended rim widths for each:

Nominal section width of tire	Recommended rim widths
Nominal section width of tire	Straight-side rim	Crochet-type rim
16	-	13C
18	-	13C
20	-	13C
23	16	13C, 15C
25	16, 18	13C, 15C, 17C
28	16, 18, 20	15C, 17C, 19C
32	16, 18, 20	15C, 17C, 19C
35	18, 20, 22	17C, 19C, 21C
37	18, 20, 22	17C, 19C, 21C
40	20, 22, 24	19C, 21C, 23C
44	20, 22, 24, 27	19C, 21C, 23C, 25C
47	20, 22, 24, 27	19C, 21C, 23C, 25C
50	22, 24, 27, 30.5	21C, 23C, 25C
54	27, 30.5	25C
57	27, 30.5	25C
62	27, 30.5	-

Older markings

Older markings of wired-edge tires can be converted to ISO 5775 designations with the help of the following table:

Tire size designation	Old marking, outer diameter
Tire size designation	Inches	Millimetres
28-590	26 × 1⅜ × 1⅛
28-622	28 × 1⅝ × 1⅛	700 × 28 C
28-622	28 × 1⅝ × 1¼ × 1⅛	700 C Carrera
28-630	27 × 1¼ fifty
28-635	28 × 1½	700 B
28-642	28 × 1⅜ × 1⅛	700 × 28 A
32-239	12 × 1⅜ × 1¼	300 × 32
32-248	12 × 1¼	300 × 32 A
32-288	14 × 1⅜ × 1¼	350 × 32
32-298	14 × 1¼	350 × 32 A
32-340	16 × 1⅜ × 1¼	400 A
32-340		400 × 32
32-349	16 × 1¼ NL	400 × 32 A
32-357	17 × 1¼
32-369	16 × 1¼
32-390	18 × 1⅜ × 1¼	450 A
32-390		450 × 32
32-400	18 × 1¼	450 × 32 A
32-406	20 × 1¼
32-438		500 × 32 ANL
32-440	20 × 1⅜ × 1¼	500 A
32-440		500 × 32
32-451	20 × 1¼	500 × 32 A
32-489		550 × 32 ANL
32-490	22 × 1⅜ × 1¼	550 A
32-490		550 × 32
32-501	22 × 1¼	550 × 32 A
32-508	22 × 1¼ × 1
32-540	24-1⅜ × 1¼
32-541	24 × 1⅜ × 1¼ NL	600 A
32-541		600 × 32 A
32-547	24 × 1¼
32-590	26 × 1⅜ 1¼	650 × 32 A
32-597	26 × 1¼
32-622	28 × 1⅝ × 1¼	700 × 32 C
32-622	28 × 1¼ × 1¾	700 × C Course
32-630	27 × 1¼
32-635	28 × 1½ × 1⅛	700 × 28 B
32-635		700 B Course
37-288		350 A Comfort
37-288		350 A 1/2 Balloon
37-298	14 × 1⅜
37-337	16 × 1⅜ ANL
37-340	16 × 1⅜ NL	400 A Comfort
		400 A 1/2 Balloon
		400 × 42 A
		400 × 35 A
37-349	16 × 1⅜ NL
37-387	18 × 1⅜
37-390		450 A Comfort
37-390		450 A 1/2 Balloon
37-400	18 × 1⅜
37-406	20 × 1⅜
37-438	20 × 1⅜ NL
37-440		500 A Comfort
37-440		500 A 1/2 Balloon
37-451	20 × 1⅜
37-489	22 × 1⅜ NL
37-490		550 A Comfort
37-490		550 A 1/2 Balloon
37-498	22 × 1⅜ × 1¼ NL
37-501	22 × 1⅜
37-540	24 × 1⅜
37-541		600 A Comfort
		600 A 1/2 Balloon
		600 × 35 A
37-565	25 × 1⅜
37-584	26 × 1½ × 1⅜
37-584	26 × 1⅜ × 1½
37-590	26 × 1⅜	650 A
37-590		650 × 35 A
37-622	28 × 1⅝ × 1⅜	700 × 35 C
37-622	28 × 1⅜ 1⅝
37-642	28 × 1⅜	700 × 35 A
40-279	14 × 1½	350 × 38 B
40-288	14 × 1½ NL	350 × 38
40-330	16 × 1½	400 × 38 B
40-406	20 × 1½
40-432	20 × 1½
40-440	20 × 1½ NL	500 × 38
40-534	24 × 1½
40-540	24 × 1⅜ × 1½
40-540	24 × 1½ × 1⅜
40-571	26 × 1½ C.S.
40-571	26 × 1⅝ × 1½ NL
40-584	26 × 1½	650 × 35 B
40-584		650 × 38 B
40-590	26 × 1⅜ × 1½ NL
40-622	28 × 1⅝ × 1½ NL	700 × 38 C
40-635	28 × 1½ × 1⅜	700 B Standard
	28 × 1½	700 × 35 B
		700 × 38 B
44-194	10 × 1⅝
44-288	14 × 1⅜ × 1⅝	350 A
44-288		350 × 42 A
44-340	16 × 1⅝
44-428	20 × 1⅝ × 1½
44-484	22 × 1⅝ × 1½
44-531	24 × 1⅝ × 1½
44-584	26 × 1½ × 1⅝	650 B Semi-comfort
	26 × 1⅝ × 1½	650 B 1/2 Balloon
	26 × 1¾ × 1½	650 × 42 B
44-622	28 × 1⅝	700 × 42 C
44-635	28 × 1⅝ × 1½
44-635	28 × 1½ × 1⅝
45-584	26 × 1.75 × 1½	650 × 45 B
45-584	26 × 1½ × 1¾
47-203	12½ × 1.75 × 2¼
47-222	11 × 1¾
47-305	16 × 1.75 × 2
47-317	16 × 1¾
47-355	18 × 1.75 × 2
47-406	20 × 1.75 × 2
47-406	20 × 1.75
47-419	20 × 1¾
47-501 T	24 × 1¾ R	600 × 45 C
47-507	24 × 1.75 × 2
47-507	24 × 1.75
47-520	24 × 1¾
47-559	26 × 1.75 × 2
47-559	26 × 1.75
47-571	26 × 1¾	650 × 45 C
47-571	26 × 1⅝	650 C S.C.
47-622	28 × 1¾	700 × 45 C
	28 × 1.75
	28 × 15/8 1¾
50-406	20 × 1.95
52-406	20 × 1.95
54-298	14 × 2 × 1¾
54-305	16 × 2
54-400	20 × 2 × 1¾
54-400	20 × 2 F 4 J
54-406	20 × 2.00
54-428	20 × 2
54-559	26 × 2.00
54-571	26 × 1¾ × 2
	26 × 2 × 1¾
	26 × 2	650 × 50 C
54-584	26 × 2 × 2½
54-584	26 × 1½ × 2
54-609	28 × 2
57-239		300 × 55 A
57-251 T		315 × 55
57-305	16 × 2.125
57-305	16 × 2.125 × 2
57-390		450 × 55 A
57-406	20 × 2.125
57-406	20 × 2.125 × 2
57-507	24 × 2.125
57-507	24 × 2.125 × 2
57-559	26 × 2.125
57-559	26 × 2.125 × 2
62-203	12½ × 2¼	320 × 57
62-305	16 × 2.125
67-203	13 × 2½	330 × 65
67-381	20 × 2½

Such older markings can be appended to the ISO 5775 designation in parentheses.

Beaded-edge tires

Beaded-edge tires are mounted on hooked-bead rims. They are marked with an overall diameter code and a nominal section-width code, separated by a cross (×). An example for such a marking is

20×1.375

Rims

ISO 5775-2 defines designations for bicycle rims. It distinguishes between

Straight-side (SS) rims
Crochet-type (C) rims
Hooked-bead (HB) rims

Rims are designated by their nominal rim diameter and their nominal width, separated by a cross (×). Both are measured in millimeters. The rim type codes SS or HB precede the rim designation, whereas code C is appended to the nominal width. Examples:

SS 400×20, HB 422×25, 620×13C

The nominal width of a rim is the inner width between the straight sides or beads as one can easily measure it with a caliper (see the standard for drawings and exact measurement procedures).

The standard widths of straight-side rims are:

18, 20, 22, 24, 27, 30.5

The standard widths of crochet-type rims are:

13C, 15C, 16C, 17C, 19C, 21C, 23C, 25C

The standard widths of hooked-bead rims are:

20, 25, 27

The standard diameters of straight-side and crochet-type rims are:

194, 203, 222, 239, 248, 251, 279, 288, 298, 305, 317, 330, 337, 340, 349, 355, 357, 369, 381, 387, 390, 400, 406, 419, 428, 432, 438, 440, 451, 484, 489, 490, 498, 501, 507, 520, 531, 534, 540, 541, 547, 559, 565, 571, 584, 590, 597, 609, 622, 630, 635, 642

The standard diameters of hooked-bead rims are:

270, 321, 372, 422, 459, 473, 510, 524, 560, 575, 611

External links

Sheldon Brown. "Tire Sizing".
"Technical information – bicycle tyres" (PDF). Schwalbe. . handbook by a German tyre manufacturer, includes detailed size tables

References

International Standard ISO 5775-1:1997, Bicycle tyres and rims — Part 1: Tyre designations and dimensions
International Standard ISO 5775-2:1996, Bicycle tyres and rims — Part 2: Rims

ISO standards by standard number

List of ISO standards / ISO romanizations / IEC standards

1–9999	1 2 3 4 5 6 7 9 16 31 -0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 128 216 217 226 228 233 259 269 302 306 428 518 519 639 -1 -2 -3 -5 -6 646 690 732 764 843 898 965 1000 1004 1007 1073-1 1413 1538 1745 1989 2014 2015 2022 2047 2108 2145 2146 2240 2281 2709 2711 2788 2852 3029 3103 3166 -1 -2 -3 3297 3307 3602 3864 3901 3977 4031 4157 4217 4909 5218 5428 5775 5776 5800 5964 6166 6344 6346 6385 6425 6429 6438 6523 6709 7001 7002 7098 7185 7200 7498 7736 7810 7811 7812 7813 7816 8000 8178 8217 8571 8583 8601 8632 8652 8691 8807 8820-5 8859 -1 -2 -3 -4 -5 -6 -7 -8 -8-I -9 -10 -11 -12 -13 -14 -15 -16 8879 9000/9001 9075 9126 9293 9241 9362 9407 9506 9529 9564 9594 9660 9897 9899 9945 9984 9985 9995

10000–19999	10005 10006 10007 10116 10118-3 10160 10161 10165 10179 10206 10218 10303 -11 -21 -22 -28 -238 10383 10487 10585 10589 10646 10664 10746 10861 10957 10962 10967 11073 11170 11179 11404 11544 11783 11784 11785 11801 11898 11940 (-2) 11941 11941 (TR) 11992 12006 12182 12207 12234-2 13211 -1 -2 13216 13250 13399 13406-2 13450 13485 13490 13567 13568 13584 13616 14000 14031 14224 14289 14396 14443 14496 -2 -3 -6 -10 -11 -12 -14 -17 -20 14644 14649 14651 14698 14750 14764 14882 14971 15022 15189 15288 15291 15292 15398 15408 15444 -3 15445 15438 15504 15511 15686 15693 15706 -2 15707 15897 15919 15924 15926 15926 WIP 15930 16023 16262 16612-2 16750 16949 (TS) 17024 17025 17203 17369 17442 17799 18000 18004 18014 18245 18629 18916 19005 19011 19092 (-1 -2) 19114 19115 19125 19136 19439 19500 19501 19502 19503 19505 19506 19507 19508 19509 19510 19600:2014 19752 19757 19770 19775-1 19794-5 19831

20000+	20000 20022 20121 21000 21047 21500 21827:2002 22000 23270 23271 23360 24517 24613 24617 24707 25178 25964 26000 26300 26324 27000 series 27000 27001:2005 27001:2013 27002 27006 27729 28000 29110 29148 29199-2 29500 30170 31000 32000 38500 40500 42010 80000 -1 -2 -3

Category

This article is issued from Wikipedia - version of the 10/4/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.