Mechanical metamaterial
Mechanical metamaterials are artificial structures with mechanical properties defined by their structure rather than their composition. They can be seen as a counterpart to the rather well-known family of optical metamaterials and include acoustic metamaterials as a special case of vanishing shear. Their mechanical properties can be designed to have values which cannot be found in nature.
Examples of mechanical metamaterials
Acoustic / phononic metamaterials
Acoustic or phononic metamaterials can exhibit acoustic properties not found in nature, such as negative effective bulk modulus,[1] negative effective mass density,[2][3] or double negativity.[4][5] They find use in (mostly still purely scientific) applications like acoustic subwavelength imaging,[6] superlensing,[7] negative refraction [8] or transformation acoustics.[9][10]
Materials with negative Poisson's ratio (auxetics)
Poisson's ratio defines how a material expands (or contracts) transversely when being compressed longitudinally. While most natural materials have a positive Poisson's ratio (coinciding with our intuitive idea that by compressing a material it must expand in the orthogonal direction), a family of extreme materials known as auxetic materials can exhibit Poisson's ratios below zero. Examples of these can be found in nature, or fabricated,[11][12] and often consist of a low-volume microstructure that grants the extreme properties to the bulk material. Simple designs of composites possessing negative Poisson's ratio (inverted hexagonal periodicity cell) were published in 1985.[13][14] In addition, certain origami folds are also known to exhibit negative Poisson's ratio.[15][16][17]
Publications related to mechanical metamaterials incluce,[18][19][20] and.[21]
Metamaterials with negative longitudinal and volume compressibility transitions
In a closed thermodynamic system in equilibrium, both the longitudinal and volumetric compressibility are necessarily non-negative because of stability constraints. For this reason, when tensioned, ordinary materials expand along the direction of the applied force. It has been shown, however, that metamaterials can be designed to exhibit negative compressibility transitions, during which the material undergoes contraction when tensioned (or expansion when pressured).[22] When subjected to isotropic stresses, these metamaterials also exhibit negative volumetric compressibility transitions.[23] In this class of metamaterials, the negative response is along the direction of the applied force, which distinguishes these materials from those that exhibit negative transversal response (such as in the study of negative Poisson's ratio).
Pentamode metamaterials or meta-fluids
A pentamode metamaterial is an artificial three-dimensional structure which, despite being a solid, ideally behaves like a fluid. Thus, it has a finite bulk but vanishing shear modulus, or in other words it is hard to compress yet easy to deform. Speaking in a more mathematical way, pentamode metamaterials have an elasticity tensor with only one non-zero eigenvalue and five (penta) vanishing eigenvalues.
Pentamode structures have been proposed theoretically by G. W. Milton in 1995 [24] but have not been fabricated until early 2012.[25] According to theory, pentamode metamaterials can be used as the building blocks for materials with completely arbitrary elastic properties.[24] Anisotropic versions of pentamode structures are a candidate for transformation elastodynamics and elastodynamic cloaking.
References
- ↑ Lee, Sam Hyeon; Park, Choon Mahn; Seo, Yong Mun; Wang, Zhi Guo; Kim, Chul Koo (29 April 2009). "Acoustic metamaterial with negative modulus". Journal of Physics: Condensed Matter. 21 (17): 175704. arXiv:0812.2952. Bibcode:2009JPCM...21q5704L. doi:10.1088/0953-8984/21/17/175704.
- ↑ Lee, Sam Hyeon; Park, Choon Mahn; Seo, Yong Mun; Wang, Zhi Guo; Kim, Chul Koo (1 December 2009). "Acoustic metamaterial with negative density". Physics Letters A. 373 (48): 4464–4469. Bibcode:2009PhLA..373.4464L. doi:10.1016/j.physleta.2009.10.013.
- ↑ Yang, Z.; Mei, Jun; Yang, Min; Chan, N.; Sheng, Ping (1 November 2008). "Membrane-Type Acoustic Metamaterial with Negative Dynamic Mass". Physical Review Letters. 101 (20). Bibcode:2008PhRvL.101t4301Y. doi:10.1103/PhysRevLett.101.204301.
- ↑ Ding, Yiqun; Liu, Zhengyou; Qiu, Chunyin; Shi, Jing (August 2007). "Metamaterial with Simultaneously Negative Bulk Modulus and Mass Density". Physical Review Letters. 99 (9): 093904. Bibcode:2007PhRvL..99i3904D. doi:10.1103/PhysRevLett.99.093904. PMID 17931008.
- ↑ Lee, Sam Hyeon; Park, Choon Mahn; Seo, Yong Mun; Wang, Zhi Guo; Kim, Chul Koo (1 February 2010). "Composite Acoustic Medium with Simultaneously Negative Density and Modulus". Physical Review Letters. 104 (5). arXiv:0901.2772. Bibcode:2010PhRvL.104e4301L. doi:10.1103/PhysRevLett.104.054301.
- ↑ Zhu, J.; Christensen, J.; Jung, J.; Martin-Moreno, L.; Yin, X.; Fok, L.; Zhang, X.; Garcia-Vidal, F. J. (2011). "A holey-structured metamaterial for acoustic deep-subwavelength imaging". Nature Physics. 7 (1): 52–55. Bibcode:2011NatPh...7...52Z. doi:10.1038/nphys1804.
- ↑ Li, Jensen; Fok, Lee; Yin, Xiaobo; Bartal, Guy; Zhang, Xiang (2009). "Experimental demonstration of an acoustic magnifying hyperlens". Nature Materials. 8 (12): 931–934. Bibcode:2009NatMa...8..931L. doi:10.1038/nmat2561. PMID 19855382.
- ↑ Christensen, Johan; de Abajo, F. (2012). "Anisotropic Metamaterials for Full Control of Acoustic Waves". Physical Review Letters. 108 (12). Bibcode:2012PhRvL.108l4301C. doi:10.1103/PhysRevLett.108.124301.
- ↑ Farhat, M.; Enoch, S.; Guenneau, S.; Movchan, A. (2008). "Broadband Cylindrical Acoustic Cloak for Linear Surface Waves in a Fluid". Physical Review Letters. 101 (13). Bibcode:2008PhRvL.101m4501F. doi:10.1103/PhysRevLett.101.134501.
- ↑ Cummer, Steven A; Schurig, David (2007). "One path to acoustic cloaking". New Journal of Physics. 9 (3): 45–45. Bibcode:2007NJPh....9...45C. doi:10.1088/1367-2630/9/3/045.
- ↑ Xu, B.; Arias, F.; Brittain, S. T.; Zhao, X.-M.; Grzybowski, B.; Torquato, S.; Whitesides, G. M. (1999). "Making Negative Poisson's Ratio Microstructures by Soft Lithography". Advanced Materials. 11 (14): 1186–1189. doi:10.1002/(SICI)1521-4095(199910)11:14<1186::AID-ADMA1186>3.0.CO;2-K.
- ↑ Bückmann, Tiemo; Stenger, Nicolas; Kadic, Muamer; Kaschke, Johannes; Frölich, Andreas; Kennerknecht, Tobias; Eberl, Christoph; Thiel, Michael; Wegener, Martin (22 May 2012). "Tailored 3D Mechanical Metamaterials Made by Dip-in Direct-Laser-Writing Optical Lithography". Advanced Materials. 24 (20): 2710–2714. doi:10.1002/adma.201200584. PMID 22495906.
- ↑ Kolpakovs, A.G. (1985). "Determination of the average characteristics of elastic frameworks". Journal of Applied Mathematics and Mechanics. 49 (6): 739–745. Bibcode:1985JApMM..49..739K. doi:10.1016/0021-8928(85)90011-5.
- ↑ Almgren, R.F. (1985). "An isotropic three-dimensional structure with Poisson's ratio=-1". J. Elasticity. 15: 427–430. doi:10.1007/bf00042531.
- ↑ Schenk, Mark (2011). Folded Shell Structures, PhD Thesis (PDF). University of Cambridge, Clare College.
- ↑ Wei, Z. Y.; Guo, Z. V.; Dudte, L.; Liang, H. Y.; Mahadevan, L. (2013-05-21). "Geometric Mechanics of Periodic Pleated Origami". Physical Review Letters. 110 (21): 215501. doi:10.1103/PhysRevLett.110.215501.
- ↑ Eidini, Maryam; Paulino, Glaucio H. (2015). "Unraveling metamaterial properties in zigzag-base folded sheets". Science Advances. 1 (8): e1500224. arXiv:1502.05977. Bibcode:2015SciA....1E0224E. doi:10.1126/sciadv.1500224. ISSN 2375-2548.
- ↑ Theocaris, P.S.; Stavroulakis, G.E.; Panagiotopoulos, P.D. (1997). "Negative Poisson's ratio in composites with star-shaped inclusions: a numerical homogenization approach .". Archive of Applied Mechanics. 67 (4): 274–286. Bibcode:1997AAM....67..274T. doi:10.1007/s004190050117.
- ↑ Theocaris, P.S.; Stavroulakis, G.E. (1998). "The homogenization method for the study of variation of Poisson's ratio in fiber composites". Archive of Applied Mechanics. 69 (3-4): 281–295.
- ↑ G.E. Stavroulakis: Auxetic behaviour: Appearance and engineering applications. Physica Status Solidi (b), 242(3), 710-720, 2005.
- ↑ Kaminakis, N.T.; Stavroulakis, G.E. (2012). "Topology optimization for compliant mechanisms, using evolutionary-hybrid algorithms and application to the design of auxetic materials". Composites Part B: Engineering. 43 (6): 2655–2668. doi:10.1016/j.compositesb.2012.03.018.
- ↑ Nicolaou Z. G. and Motter A. E., Mechanical metamaterials with negative compressibility transitions, Nature Materials 11, 608-613 (2012).
- ↑ Nicolaou Z. G. and Motter A. E., Longitudinal inverted compressibility in super-strained metamaterials, Journal of Statistical Physics 151(6), 1162 (2013).
- 1 2 Milton, Graeme W.; Cherkaev, Andrej V. (1 January 1995). "Which Elasticity Tensors are Realizable?". Journal of Engineering Materials and Technology. 117 (4): 483. doi:10.1115/1.2804743.
- ↑ Kadic, Muamer; Bückmann, Tiemo; Stenger, Nicolas; Thiel, Michael; Wegener, Martin (1 January 2012). "On the practicability of pentamode mechanical metamaterials". Applied Physics Letters. 100 (19): 191901. arXiv:1203.1481. Bibcode:2012ApPhL.100s1901K. doi:10.1063/1.4709436.