Ring-opening metathesis polymerisation

For other uses of "ROMP", see ROMP (disambiguation).

Ring-opening metathesis polymerization (ROMP) is a type of olefin metathesis chain-growth polymerization that produces industrially important products. The driving force of the reaction is relief of ring strain in cyclic olefins (e.g. norbornene or cyclopentene) and a wide variety of catalysts have been discovered.

Mechanism

The catalysts used in the ROMP reaction include a wide variety of metals and range from a simple RuCl3/alcohol mixture to Grubbs' catalyst[1][2]

The ROMP reaction is catalyzed primarily through the formation of metal-carbene complexes as first reported by Nobel Prize winner Yves Chauvin and his colleague Jean-Louis Hérisson[3][4] although a hydride mechanism has also been reported.[1] The initiation of the carbene species occurs through numerous pathways; solvent interactions, substituent interactions, and co-catalysts all can contribute to the production of the reactive catalytic species[1][5] .[6]

The ROMP catalytic cycle requires a strained cyclic structure because the driving force of the reaction is relief of ring strain. After formation of the metal-carbene species, the carbene attacks the double bond in the ring structure forming a highly strained metallacyclobutane intermediate. The ring then opens giving the beginning of the polymer: a linear chain double bonded to the metal with a terminal double bond as well. The new carbene reacts with the double bond on the next monomer, thus propagating the reaction[3]

Solvent effects

The choice of solvent can play a vital role in the formation of the carbene species. One example of such interactions was reported by Basset, et al. regarding RuCl3 and the effects of various alcohols on its catalytic activity. Depending upon the alcohol used, the mechanistic pathway resulted in either a reactive ruthenium-hydride species or the formation of a ruthenium-carbene. Experimental results demonstrated that by altering the solvent, the molecular weight of the polymer produced was either increased or decreased. This observation could result in increased diversity of the catalytic system enabling the production of polymers of various strengths, as polymers with higher molecular weights are typically stronger than polymers of low molecular weights.[1] Drastic differences in the rate of the reaction were also observed, thereby supporting the conclusion that the solvent plays a role in the formation of the ruthenium-carbene.

Hamilton, et al. report that altering the solvent in metal salt-type catalytic systems can drastically change the microenvironment of the system; these changes affect the tacticity of the polymer, the cis-trans ratio, and can increase the regularity of copolymers.[7]

Substituent Effects

As previously stated, ROMP catalysis is dependent on ring strain. Therefore, the best substrates are bi- and tri-cyclic rings; however, these reactions can lead to numerous products.[8][9] The addition of substituents to the ring system can result in more complex or more functional polymer products. Unfortunately, substituents on the ring can react deleteriously with some of the most common catalysts. The first Grubbs’ catalyst is poisoned by nitrile or amine groups.[5] Many common molybdenum or tungsten metathetical catalysts are affected by oxygenate or nitrogenous groups. Thus alternative catalysts, such as ruthenium carbene complexes that are not affected by these functional groups are being researched.[1]

The position of the substituent in the ring complex has a correlation to the poisoning effect on the catalyst.[10][11] However, in cases where it is non-poisoning, it also plays a role in determining the reactivity of the substrate. Substituents cannot be placed on the carbon with the double bond or the reaction will not take place.[8] Slugovc, et al. tested the effect of numerous functional groups on the ROMP reaction using the ‘Super-Grubbs’ catalyst, (H2IMes)(PCy3)(Cl)2Ru=CHPh. The experimental results show that the addition of common substituents to the reaction mixture can be used to tune the molecular weight range of the polymer produced.[5]

Depending on the catalyst, some substituents can increase the rate of reaction. Norbornene epoxides increase the rate of reaction when a ruthenium trichloride/alcohol mixture is used as the catalyst. Basset, et al. contribute this rate increase to the production of a metallooxacyclobutane complex that, upon metathetic opening, gives the active ruthenium carbene complex directly.[1] It stands to reason that other functional groups that can react with a similar mechanistic pathway will also increase the rate of reaction.

Precision control of polymer stereo- and regiochemistry is a powerful approach for the manipulation of polymer properties. This is particularly true in the case of polyolefins where tacticity and regiochemistry can have dramatic influence on the thermal, rheological, and crystallization properties. The authors Hillmyer, Kobayashi and Pitet demonstrate the regio- and stereoselective ring-opening metathesis polymerization (ROMP) of 3-substituted cis-cyclooctenes (3RCOEs, R = methyl, ethyl, hexyl, and phenyl).[12] Later studies by Hillmyer and Cramer demonstrated that the regioselectivity was due to the steric interactions between the substituent and the NHC-ligand, but with a significant contribution from the solvent polarity.[13] In this study the authors also found different rate limiting step for the different ring sizes.

Industrial Applications

Ring-opening metathesis polymerization of cycloalkenes can produce many important petrochemicals; this is of particular importance in an industrial capacity because synthetic capabilities include linear polymers from inexpensive monomers or polymers with special properties, thus compensating for an additional expense. Some examples of polymers produced on an industrial level through ROMP catalysis are Vestenamer or trans-polyoctenamer which is the metathetical polymer of cyclooctene; Norsorex or polynorbornene is another important ROMP product on the market; Telene and Metton are polydicyclopentadiene products produced in a side reaction of the polymerization of norbornene.[9]

The ROMP process is quite useful because a regular polymer with a regular amount of double bonds is formed. The resulting product can be subjected to partial or total hydrogenation or can be functionalized into more complex compounds.[9]

See also

References

  1. 1 2 3 4 5 6 Mutch, A.; Leconte, M.,; Lefebvre, F.; Basset, J.M. (1998). "Effect of alcohols and epoxides on the rate of ROMP of norbornene by a ruthenium trichloride catalyst". Journal of Molecular Catalysis A: Chemical. 133 (1–2): 191–199. doi:10.1016/S1381-1169(98)00103-4.
  2. ↑ Scholl, M.; Ding, S.; Lee, C. W.; Grubbs, R. H. (1999). "Synthesis and Activity of a New Generation of Ruthenium-Based Olefin Metathesis Catalysts Coordinated with 1,3-Dimesityl-4,5-dihydroimidazol-2-ylidene Ligands". Organic Letters. 1 (6): 953–956. doi:10.1021/ol990909q.
  3. 1 2 Grubbs, R.H.; Tumas, W. (1989). "Polymer Synthesis and Organotransition Metal Chemistry". Science. 243 (4893): 907–915. Bibcode:1989Sci...243..907G. doi:10.1126/science.2645643. PMID 2645643.
  4. ↑ Hérisson, J.L.; Chauvin, Y. (1971). "Catalyse de transformation des oléfines par les complexes du tungstène. II. Télomérisation des oléfines cycliques en présence d'oléfines acycliques". Die Makromolekulare Chemie. 141 (1): 161–176. doi:10.1002/macp.1971.021410112.
  5. 1 2 3 Slugovc, C.; Demel, S.; Riegler, S.; Hobisch, J.; Stelzer, F. (2004). "Influence of functional groups on ring opening metathesis polymerization and polymer properties". Journal of Molecular Catalysis A: Chemical. 213 (1): 107–113. doi:10.1016/j.molcata.2003.10.054.
  6. ↑ Zhang, D.; Huang, J.; Qian, Y.; Chan, A.S.C. (1998). "Ring-opening metathesis polymerization of norbornene and dicylopentadiene catalyzed by Cp2TiCl2/RMgX". Journal of Molecular Catalysis A: Chemical. 133 (1–2): 131–133. doi:10.1016/S1381-1169(98)00087-9.
  7. ↑ Samak, B.A.; Amir-Ebrahimi, V; Corry, D.; Hamilton, J.G.; Rigby, S; Rooney, J.J.; Thompson, J.M. (2000). "Dramatic solvent effects on ring-opening metathesis polymerization of cycloalkenes". Journal of Molecular Catalysis A: Chemical. 160 (1): 13–21. doi:10.1016/S1381-1169(00)00228-4.
  8. 1 2 Hammond, P. 10.569 Synthesis of Polymers Fall 2006 materials; Massachusetts Institute of Technology OpenCourseWare, 2006.
  9. 1 2 3 Mol, J.C. (2004). "Industrial applications of olefin metathesis". Journal of Molecular Catalysis A: Chemical. 213 (1): 39–45. doi:10.1016/j.molcata.2003.10.049.
  10. ↑ Wright, D.L.; Schulte II, J.P.; Page, M.A (2000). "An Imine Addition/Ring-Closing Metathesis Approach to the Spirocyclic Core of Halichlorine and Pinnaic Acid". Organic Letters. 2 (13): 1847–1850. doi:10.1021/ol005903b. PMID 10891173.
  11. ↑ Alcaide, B.; Almendros, P.; Alonso, J.; Aly, M.F (2001). "A Novel Use of Grubbs' Carbene. Application to the Catalytic Deprotection of Tertiary Allylamines". Organic Letters. 3 (23): 3781–3784. doi:10.1021/ol0167412. PMID 11700137.
  12. ↑ Shingo Kobayashi, Louis M. Pitet, and Marc A. Hillmyer http://pubs.acs.org/doi/abs/10.1021/ja201644v
  13. ↑ Martinez, Henry (2012). "Selectivity in Ring-Opening Metathesis Polymerization of Z -Cyclooctenes Catalyzed by a Second-generation Grubbs Catalyst". ACS Catalysis. 2 (12): 2547–2556. doi:10.1021/cs300549u.
This article is issued from Wikipedia - version of the 12/3/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.