Atwater Manufacturing Company
|
Atwater Manufacturing Company | |
   | |
| Location | 335 Atwater St., Southington, Connecticut |
|---|---|
| Coordinates | 41°34′43″N 72°53′54″W / 41.57861°N 72.89833°WCoordinates: 41°34′43″N 72°53′54″W / 41.57861°N 72.89833°W |
| Area | 6.5 acres (2.6 ha) |
| Built | c.1912 |
| Architect | Unknown |
| Architectural style | Industrial vernacular; Other |
| MPS | Historic Industrial Complexes of Southington TR |
| NRHP Reference # | 88002678 [1] |
| Added to NRHP | December 8, 1988 |
The Atwater Manufacturing Company is a historic industrial property at 335 Atwater Street in Southington, Connecticut. Also known as Rex Forge Division, J.J. Ryan Company, the ten extant buildings of the complex date as far back as 1912.[1] The site is significant as the location of the Atwater Company, a major local employer and manufacturer of carriage hardware and later automobile parts. The location is also the site of the town's first grist mill, established in 1767.[2]
The property was listed on the National Register of Historic Places in 1988.[1]
See also
References
- 1 2 3 National Park Service (2009-03-13). "National Register Information System". National Register of Historic Places. National Park Service.
- ↑ Gregory E. Andrews (July 1986). "Connecticut Historical Commission Historic Resources Inventory: Rex Forge Division, J.J. Ryan Company / Atwater Manufacturing Company" (PDF). National Park Service. and Accompanying two photos from 1986
| Topics |   | |
|---|---|---|
| Lists by county |
| |
| Lists by city | ||
| Other lists | ||
| ||
This article is issued from Wikipedia - version of the 11/28/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.