Bavarian E I

The Bavarian Class E I steam locomotives operated by the Royal Bavarian State Railways encompassed four different variants of saturated steam, goods train locomotive with a 2-8-0 wheel arrangement.

Standard variant, older type

Bavarian E I
Standard variant, older type
Number(s) Bavaria:
2051–2062
France:
Etat 140-901 to 903
Quantity 12
Manufacturer Krauss
Year(s) of manufacture 1894–1896
Retired 1924
Wheel arrangement 2-8-0
Axle arrangement 1'D n2
Gauge 1435 mm
Length over buffers 16800 mm
Wheelbase incl. tender 12750 mm
Service weight 64.4 t
Adhesive weight 54,0 t
Axle load 13.5 t (centre)
Top speed 50 km/h
Driving wheel diameter 1170 mm
Leading wheel diameter 1006 mm
Valve gear Walschaerts (Heusinger), outside
No. of cylinders 2
Cylinder bore 540 mm
Piston stroke 560 mm
Boiler Overpressure 12 kg/cm² = 11.77 bar
Grate area 2.43 m²
Evaporative heating area 159.8 m²
Tender bay 3 T 12.3
Tender service weight 32.8 t
Water capacity 12.3 m³
Fuel 5.5 t coal

The first series of E I's was built by Krauss in 12 examples. The cylinders were positioned in front of the carrying axle and drove the first coupled axle. The carrying and driving axles were linked together in a Krauss-Helmholtz bogie. In addition the outside Walschaerts (Heusinger) valve gear had very short connecting rods on the engines delivered to Bavaria.

The vehicles were coupled with Bavarian Class bay 2'2' T 18 tenders. Later they were equipped with Class 3 T 12.3 tenders from the Bavarian B XI's.

Sondermann Variant

Bavarian E I
Sondermann variant
Number(s) Bavaria:
2063–2064
Quantity 2
Manufacturer Krauss
Year(s) of manufacture 1896–1897
Retired 1924
Wheel arrangement 2-8-0
Axle arrangement 1'D n4v
Gauge 1435 mm
No. of cylinders 4
Cylinder bore 2x370/710 mm
Piston stroke 560 mm
Boiler Overpressure 13.5 kg/cm² = 13.24 bar
Tender bay 3 T 12.3
Tender service weight 32.8 t
Water capacity 12.3 m³
Fuel 5.5 t coal
certain technical data as for the newer standard variant; slightly differing weights

The second E I series delivered to the Royal Bavarian State Railways was the Sondermann Variant built from 1896. It had two overlapping cylinders that formed a combined double slide valve (Doppelschieber). The carrying axle and the first driving axle were housed in a Krauss-Helmholtz bogie. The advantage of this locomotive variant was that the double cylinder was very short as a result of the tandem construction. Nevertheless, the engine did not perform especially well, so that the two units were converted into locomotives with a conventional cylinder arrangement.

Standard variant, newer type

Bavarian E I
Standard variant, newer type
Number(s) Bavaria:
2065–2099, 2116–2130
France:
Etat 140-904 to 905, 907
Belgium:
Etat Belge 7374–7375
Poland:
PKP Tr101-1
Quantity 48
Manufacturer Krauss
Year(s) of manufacture 1899–1901
Retired 1923–1925
Wheel arrangement 2-8-0
Axle arrangement 1'D n2
Gauge 1435 mm
Length over buffers 18202 mm1
Wheelbase incl. tender 15425 mm1
Service weight 64.5 t
Adhesive weight 54.5 t
Axle load 13.6 t (centre)
Top speed 60 km/h
Driving wheel diameter 1170 mm
Leading wheel diameter 1006 mm
Valve gear Walschaerts (Heusinger), outside
No. of cylinders 2
Cylinder bore 540 mm
Piston stroke 560 mm
Boiler Overpressure 12 kg/cm² = 11.77 bar
Grate area 2.43 m²
Evaporative heating area 159.8 m²
Tender bay 3 T 13.8
bay 3 T 14
bay 2'2' T 18
Tender service weight 34.9 / 36.3 / 43.0 t
Water capacity 13.8 / 14.0 / 18.0 m³
Fuel 5.5 / 6.0 / 6.5 t coal
1 with bay 2'2' T 18 tender

The third series of the E I locomotive was the final version of this particular class. A total of 48 vehicles were made and 42 were taken over by the Reichsbahn with the numbers 56 312 - 56 353. It was the same as the Sondermann variant after the conversion of the latter. These locomotives could haul a train of 820 tons at a speed of 50 km/h and even attained a speed of 40 km/h with a 1,390 ton train. On a line with a 0.5% incline they could manage an 845-ton train at 25 km/h.

Vauclain Variant

Bavarian E I (Vauclain)
Number(s) Bavaria:
2085–2086
France:
Etat 140-906
Quantity 2
Manufacturer Baldwin
Year(s) of manufacture 1899
Retired 1917-1919
Wheel arrangement 2-8-0
Axle arrangement 1'D n4v
Length over buffers 18,501 mm
Service weight 62.6 t
Adhesive weight 54.4 t
Axle load 13.6 t (centre)
Top speed 50 km/h
Driving wheel diameter 1,270 mm
Leading wheel diameter 914 mm
Valve gear Stephenson, inside
Cylinder bore 2 x 356/610 mm
Piston stroke 660 mm
Boiler Overpressure 14 kg/cm² = 13,73 bar
Grate area 3.08 m²
Evaporative heating area 177.50 m²
Tender bay 2'2' T 18.1
Tender service weight 44.0 t
Water capacity 18.1 m³
Fuel 6.5 t coal

The Class E I locomotives built for the Royal Bavarian State Railways by the Baldwin were goods train steam locomotives imported from the United States for testing purposes.

The two machines were the first in Germany to have a bar frame, which had been standard in the USA virtually from the beginning and which had been developed from the wooden beam frames of the early locomotives.

Like the two S 2/5 express train locomotives also imported from Baldwin a year later these engines were equipped with a four-cylinder Vauclain compound engine, on which the high-pressure and low-pressure cylinders were located directly one above the other and worked on the same connecting rods. Apart from the bar frame, this type of drive did not catch on in Bavaria.

The locomotives were equipped with Bavarian 2'2' T 18,1 tenders.

See also

Sources

External links

This article is issued from Wikipedia - version of the 10/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.