Bavarian D VIII

Bavarian D VIII , AL Nr. 1–3, 5 DRG Class 98.6 ÖBB 891
Number(s)	DRG 98 661…679
Quantity	10
Manufacturer	Krauss
Year(s) of manufacture	1888–1937
Retired	1959
Wheel arrangement	0-6-2
Axle arrangement	C1' n2t
Gauge	1,435 mm
Length over buffers	9,170/9,670 mm
Service weight	43.3/47.5 t
Adhesive weight	36.3/36.7 t
Axle load	12.1/12.5 t t
Top speed	45 km/h
Indicated Power	315 kW
Driving wheel diameter	1,006 mm
Trailing wheel diameter	800 mm
No. of cylinders	2
Cylinder bore	390/406 mm
Piston stroke	508 mm
Boiler Overpressure	12 bar
Grate area	1.60 m²
Evaporative heating area	89.60/90.40 m²
Locomotive brakes	Riggenbach counter-pressure brakes, compressed-air brakes

The Bavarian Class D VIII (bayerische D VIII) were saturated steam locomotives with the Royal Bavarian State Railways (Königlich Bayerische Staatsbahn).

History

In 1888, new locomotives were needed for the Freilassing–Berchtesgaden railway, which has inclines of up to 40 per mille (4%). Krauss initially delivered three machines, that were given the railway numbers 904, 905 and 906. The powerful boiler required a carrying axle that, based on a suggestion by Richard von Helmholtz, was designed as a trailing axle in the form of a Krauss-Helmholtz bogie. Thus equipped the locomotives had good riding qualities on the faster downhill run that was carried out backwards, while, for the slower uphill journey, it was sufficient to have the front coupled axle in the lead.

Additional machines

In 1890 a further two locomotives were procured, followed by five more in 1893 (railway numbers 946, 947 and 1901–1905).

In 1898 four more machines were acquired (Nos. 1906–1909), for the Ammersee Railway and in 1903 another five. On these new engines the coal bunker lay behind the driver's cab, so that the distance between the third coupled axle and the trailing axle was increased by 200 mm and the total length of the locomotives by 500 mm. In addition, the Riggenbach counter-pressure brake from the first series was omitted. The boiler (apart from the location of the steam dome) and the running gear, and hence also the performance, remained unchanged.

The Palatinate Railway (Pfalzbahn) had received similar locomotives, the Class T 4.I, that however were somewhat smaller and had smaller driving and carrying wheels.

DRG Class

In 1925 the Deutsche Reichsbahn-Gesellschaft took over nine of the ten locomotives of the first series and all nine of the second redesignating them as the DRG Class 98.6 with nos. 98 661–669 and 98 671 and 98 679. The first series was retired by 1933, the second by about 1937.

After the Second World War one vehicle went to the Austrian Federal Railways (Österreichische Bundesbahnen or ÖBB) and was in service there until 1958 as ÖBB 891.01.

Augsburg Branch Line

The Augsburg branch line (Augsburger Localbahn or AL) bought three locomotives in 1913 from Krauss, that were the same as the D VIII's of the second series. The locomotives, numbered 1–3, performed very well on the, in places, very tight curves of the branch line, so that even in 1937 – based on drawings almost 40 years old – a fourth locomotive of this type was procured, this time from Krauss-Maffei. It was given the railway number 5.

Locomotive Nos. 1 and 3 were scrapped in 1957, nos. 2 and 5 were sold in 1956 to the Southern Chemical Factory (Südchemie-Werk) in Kelheim.

See also

• Royal Bavarian State Railways
• List of Bavarian locomotives and railbuses

Literature

• Weisbrod, Bäzold, Obermayer: Das große Typenbuch deutscher Dampflokomotiven. Transpress Verlag ISBN 3-344-70751-5
• Siegfried Baum: Die Augsburger Localbahn. EK-Verlag ISBN 3-88255-444-4

External links

• There is a relevant English-language forum at Railways of Germany